Annual Published Artist Sale 2009 - Day 19.8 OVERDRIVE!!!!

Joined: 09 Oct 2003 Posts: 814 Location: Faeriewylde

I saw that, the shoulders are dead straight Smile

can't wait to see the whole outfit closeup

Joined: 04 Aug 2007 Posts: 810 Location: IAMNOWHERE

Arien wrote:

Traditionally, all PAs participate on the sale one way or another, and I'm afraid that's the only public response we are allowed to give at this time Smile

Ok.

I got your pm.

Joined: 31 Dec 1969 Posts: 3116 Location: Kattyfornia

JB1234 wrote:

Mada wrote:

If there's enough demand for a V4 version I can do it, it will involve refitting in a modeller and all the jcm's will have to be brand new. (I spent a fair amount of time on the shoulders to get rid of the rounded football look when the arms bend down.)

Please publish a tutorial on square shoulder for men's outfits. It seems
most of the men's suits have that problem.

It's very doable, just much more time consuming to create. Probably not likely to see extra effort like that be put in most Platinum Club items.
People can't afford to put in extra effort requiring a lot of non-automatic work, but more refined hand sculpting, into bottom price items.

Yes, there's an occasional vendor whom doesn't pay attention to detail in regular priced items too, but in most cases, you get what you pay for.

Joined: 25 Dec 2007 Posts: 4253

Mada wrote:

Yes it does, I've been using it to make sitting pose fix morphs for skirts. The pants for Lockwood has a jcm to fix the thigh bend Smile

It pretty much depends on how much time you want to spend in your modeller on how good the jcm is.

The video says "Morph Loader Pro," which is in Advanced Figure Setup Tools. I only have the basic FST. Would I need AFST to use this technique? I don't think I can afford it right now....

Joined: 31 Jul 2006 Posts: 14324

zigraphix wrote:

Mada wrote:

Yes it does, I've been using it to make sitting pose fix morphs for skirts. The pants for Lockwood has a jcm to fix the thigh bend Smile

It pretty much depends on how much time you want to spend in your modeller on how good the jcm is.

The video says "Morph Loader Pro," which is in Advanced Figure Setup Tools. I only have the basic FST. Would I need AFST to use this technique? I don't think I can afford it right now....

You need Morph Loader Pro, sadly. Reverse Deformation feature is _essential_ for JCMs and it isn't in usual Morph Loader.

Joined: 09 Oct 2003 Posts: 3447 Location: UK

zigraphix wrote:

Mada wrote:

Yes it does, I've been using it to make sitting pose fix morphs for skirts. The pants for Lockwood has a jcm to fix the thigh bend Smile

It pretty much depends on how much time you want to spend in your modeller on how good the jcm is.

The video says "Morph Loader Pro," which is in Advanced Figure Setup Tools. I only have the basic FST. Would I need AFST to use this technique? I don't think I can afford it right now....

Morph Loader Pro makes it easier, that's for certain. Old method is to have a guess as to how it should deformed on the default pose and check, then start adjusting. although of course that will take you longer. As it is, even with the new tools in AFST, a lot of the times you have to go back and touch-up things here or there because of the behaviour in-between extremes or when interacting when other morphs.

Joined: 24 Oct 2003 Posts: 1080 Location: Oh, USA

Blazerwiccan wrote:

Kitty all your fault. I had to get that hair not sure I will be able to grab anything else this month or not. Got my vender pay from Rendero and had to have that hair lol. Now a new M4 outfit *sob* but playing around with the hair now Smile

Now if insperation for new packs was on sale I would grab it my brain has been dead lol.

I am so evil *mwahaha*

It's kind of funny because that's what I used to pay for it as well Smile

Anyway, I'm glad that you got it and like it, hon. I love your new avatar! Very Happy

Sorry I haven't been around today to entice you to buy other things Twisted Evil

I haven't even picked up the new M4 set yet (been too busy to think about it today). But I am sure I'll be around later in the sale to make you spend money *lol*

Come to think of it, I did just buy the Gypsy hair though Wink

Joined: 09 Oct 2003 Posts: 2540 Location: Clarkson Ky USA

kittystavern wrote:

Blazerwiccan wrote:

Kitty all your fault. I had to get that hair not sure I will be able to grab anything else this month or not. Got my vender pay from Rendero and had to have that hair lol. Now a new M4 outfit *sob* but playing around with the hair now Smile

Now if insperation for new packs was on sale I would grab it my brain has been dead lol.

I am so evil *mwahaha*

It's kind of funny because that's what I used to pay for it as well Smile

Anyway, I'm glad that you got it and like it, hon. I love your new avatar! Very Happy

Sorry I haven't been around today to entice you to buy other things Twisted Evil

I haven't even picked up the new M4 set yet (been too busy to think about it today). But I am sure I'll be around later in the sale to make you spend money *lol*

Come to think of it, I did just buy the Gypsy hair though Wink

ROFL 1st thanks I did not use the ears did not need to copy your avatar too much rofl. I only got like $8 more dollars tucked away or the M4 outfit would be mine now lol. You know I could use a pay raise and new ideas Razz

Ohh you stink I want that hair too but oh well broke is broke lol. Remind me not to look at your new renders cause I can not afford to want more stuff.

Joined: 25 Dec 2007 Posts: 4253

Arien wrote:

zigraphix wrote:

Mada wrote:

Yes it does, I've been using it to make sitting pose fix morphs for skirts. The pants for Lockwood has a jcm to fix the thigh bend Smile

It pretty much depends on how much time you want to spend in your modeller on how good the jcm is.

The video says "Morph Loader Pro," which is in Advanced Figure Setup Tools. I only have the basic FST. Would I need AFST to use this technique? I don't think I can afford it right now....

Morph Loader Pro makes it easier, that's for certain. Old method is to have a guess as to how it should deformed on the default pose and check, then start adjusting. although of course that will take you longer. As it is, even with the new tools in AFST, a lot of the times you have to go back and touch-up things here or there because of the behaviour in-between extremes or when interacting when other morphs.

Well, AFST is way out of my budget right now. Maybe after the holidays, or if it's in some super amazing sale or something.

Too bad I can't buy the pieces of AFST separately....

Joined: 20 Feb 2006 Posts: 962 Location: Neverwhereland

kittystavern wrote:

bwaomega wrote:

I'm debating between Tandy, Uzuri and Kione. I can afford to buy one of them, since AprilYSH came up too early this year (payday is sometime Thursday/Friday). Anyone have some suggestions?

Oh, that's tough... I love all of them. What kind of renders so you do mostly? Fantasy, scifi, modern, cutsey? That might help to decide which to pick.

For example, personally, I use:
Kione for fantasy renders (elves, mermaids, etc)

Uzuri for mostly cute kind of renders though sometimes fantasy as well

And Tandy, I just got and have only used it for my avatar and new site mascot I am making so far. It's a nice hair for a kind of modern or pinup look. It can also be more 'cute'.

I guess that doesn't really help at all, does it? *lol* Sorry, I can't be of more help!

I use Uzuri for goth renders. (Psst, you could get all three if that impending paycheck is fat enough--just use paypal and neglect to pay until you have your money in hand.)

Joined: 06 Nov 2006 Posts: 147 Location: Australia

Miss B wrote:

Richard Haseltine wrote:

Mada wrote:

Richard Haseltine wrote:

Any hope of a V4 version of Lockwood? (Yes, I've bought the M4 version - but I'm not sure I can convert it adequately.)

If there's enough demand for a V4 version I can do it, it will involve refitting in a modeller and all the jcm's will have to be brand new. (I spent a fair amount of time on the shoulders to get rid of the rounded football look when the arms bend down.)

Thanks, I hope there is enough interest.

You can count me in. I'd like a V4 version. Love the styling of that blouse/shirt. Wink

Add me to the growing list for Lockwood for V4.
Thanks!

Joined: 17 Sep 2006 Posts: 1454

I don't care about having it for V4, but I thank you sooooo much for the M4 version, love that shirt and into the cart it went.

Joined: 20 Feb 2006 Posts: 4341

{{{{{HUGS}}}}} for Holly!

Joined: 04 Aug 2007 Posts: 810 Location: IAMNOWHERE

Kerya wrote:

{{{{{HUGS}}}}} for Holly!

You're so sweet.

Holly— don't let the anniversary dampen your circuits. Can't say I know what you're going through (haven't been there, haven't done that), but I feel just the same. Smile

Joined: 20 Feb 2009 Posts: 55

Oh no! I didn't know these were one day sales only and I forgot to go through checkout with Deeta hair Sad

( I've wanted it for ages too Sad

lol. Dagnabbit!

Joined: 31 Mar 2009 Posts: 35

I purchased Emeli for Laura some time ago but have been unable to make full use of it because it seems to require Sapphire Hair.

Unfortunately, the price of this hair has been set unchanged at a horrendous $19.95! This is a bit steep for an old model.

Is there a chance that this might be included in one of your sales quite soon?

Joined: 05 Sep 2009 Posts: 136 Location: Sydney Australia

michael sweetie, look what I just found, oh this vase is simply smashing your mother will love it.

I said it before and I will say it again, I love this new clothing set. I through I would post my fist render.

now if ? we can have this style with the shirt tucked into the paints and a nice vest for other the top... OMG

thank you again
slp

Joined: 20 Feb 2006 Posts: 4341

Sapphire Fox is not a Daz Original - which means Quarker would have to set it on sale.
The problem is: despite being older it's still very, very good ...

On the other hand I have seen it on sale (and read the cries of joy from people who didn't have it) ... so don't give up hope.

Joined: 09 Oct 2003 Posts: 814 Location: Faeriewylde

sicklittlepig wrote:

michael sweetie, look what I just found, oh this vase is simply smashing your mother will love it.

love it

Posted:Thu Nov 05, 2009 4:36 am

Great work M-S-T Wink