Loading...
> >

Show Us Your Bryce Renders Part 10

1…1617192122…100

Comments

  • mermaid010mermaid010 Posts: 5,486

    Horo- interesting tree render. I found getting good grass is more difficult than the rocks using the tree pdf's you shared, thanks. smiley

     

  • HoroHoro Posts: 10,637

    Thank you mermaid.

  • mermaid010mermaid010 Posts: 5,486
    edited June 2017

    Cleaning up an old external hard drive, I found this which was done in Bryce 5.5. It must have been in the Summer smiley  I re-rendered it in Bryce 7Pro today. I need to rework the tiles someday.

     

    dripping.jpg
    700 x 700 - 406K
    Post edited by mermaid010 on
  • JamahoneyJamahoney Posts: 1,791
    edited June 2017

    Heh he, Mermaid, as to "...getting good grass is more difficult..." - hhmm, perhaps, you need to change your dealer devil

    Jay wink

     

    Post edited by Jamahoney on
  • JamahoneyJamahoney Posts: 1,791
    edited June 2017

     

     

    Post edited by Jamahoney on
  • JamahoneyJamahoney Posts: 1,791

  • JamahoneyJamahoney Posts: 1,791
    edited June 2017

    Another view - passing it through a global, encompased and reflective glass sphere - the effects, unexpected, were nice but [they] are quite effective (setup ...etc.,).

    Jay

     

     

     

    MissionToSaturn1.jpg
    1579 x 726 - 696K
    Post edited by Jamahoney on
  • JamahoneyJamahoney Posts: 1,791

  • HoroHoro Posts: 10,637
    edited June 2017

    Mermaid - nice tiles, oldies but goldies.

    Jamahoney - very nice not Saturn but Saturn-like planet; interesting effect, too.

    An exercise in lighting. The xyzrgb_statuette is from the Stanford Computer Graphics Laboratory (Stanford 3D Scanning Repository), I reduced the resolution to 1/8 in Meshlab. It is just white diffuse and PHT boosted specular (Halo 0), lit exclusively by the SkySC5 HDRI. It stands on a fading disk and a mirror shows the same statuette from another side.

    Thai Statue

    ThaiStatue.jpg
    810 x 1200 - 136K
    Post edited by Horo on
  • JamahoneyJamahoney Posts: 1,791

    Cheers, Horo.

    The lighting and shadows on your statuette are super fine - very nicely done.

    Jay

  • HansmarHansmar Posts: 2,929

    Hi all,

    Wonderful works by all of you. Hope to be going back to Brycing soon.

     

  • JamahoneyJamahoney Posts: 1,791
    edited June 2017

    Okay, boring Saturn views...but just a final one ...'Saturn Man'

    Jay

     

     

     

     

     

    Post edited by Jamahoney on
  • JamahoneyJamahoney Posts: 1,791

  • JamahoneyJamahoney Posts: 1,791
    edited June 2017
    Jamahoney said:

     

     

     

     

     

     

     

    Post edited by Jamahoney on
  • HoroHoro Posts: 10,637
    edited June 2017

    Jamahoney - thank you Jay. It was actually an exercise in lighting. That Saturn artwork of yours with the chap in the space suit looks great.

    Another lighting experiment. The Walled City by Stonemason lit by an HDRI and the sun. The staircase at the far end of the square is in a narrow corridor and doesn't receive any light from the HDRI, neither the sun. Behind the camera is a radial with inverse gradient and this radial lights that far corridor without interfering with the foreground.

    Abandoned

    Abandoned.jpg
    1200 x 1043 - 247K
    Post edited by Horo on
  • JamahoneyJamahoney Posts: 1,791
    Hansmar said:

     

    That walled city scene, Horo, so much reminds me of the video game Half Life - it had a lot of concrete city walls, and a super game (link is YouTube trailor).

    Jay

  • HoroHoro Posts: 10,637
    edited June 2017

    Thank you Jay. It was an exercise in lighting a scene the simple way.

    Here's a triple stacked terrain from the new Gritstone Hills set and the materials applied from the same set. The sky is from the Sky Toolbox, a new set from David and myself that is currently being alpha tested.

    Islet in Bay

    IsletInBay.jpg
    1200 x 795 - 157K
    Post edited by Horo on
  • SlepalexSlepalex Posts: 911
    Horo said:

    Here's a triple stacked terrain from the new Gritstone Hills set and the materials applied from the same set. The sky is from the Sky Toolbox, a new set from David and myself that is currently being alpha tested.

     

    Excellent, Horo! The volumetric clouds and the gradient of the sky with haze are very convincing. The texture of the terrain is beyond praise.

  • JamahoneyJamahoney Posts: 1,791
    edited June 2017

    Horo, super view/work/render: does the lake look like it ends abruptly on the horizon?

     

    As usual, whenever I make [such] inquire's or comment's to anyone and everyone, they aren't critical, but just putting it out there (I would expect such replies/comments etc., with any of my own submitted works - I promise I won't be offended, but I might track you down and kill you afterwards...aarrgg devil ). 

     

    The Gritsotne Hills app will defintely be a winner - I can see this not only applicable to Earth-based renders, but also extra-planetary works, too.

    Jay

    Post edited by Jamahoney on
  • c-ramc-ram Posts: 376
    edited June 2017

    Horo: very beautiful landscape renders! Reminds me a cockpit vue from F16 aircraft over Norway lands

     

    Sorry to say, right now I am out of Bryce, I am moving from an apartment to another so, a lot of things to prepare and a lot of things to do.

     

    I have just got some little spare time to take a look at daz bryce forum and I am glad to see so much beautiful artworks!

    Post edited by c-ram on
  • mermaid010mermaid010 Posts: 5,486
    edited June 2017

    Jay – both the Saturn renders are great.

    Horo – awesome xyzrgb_statuette render, great lighting in the Abandoned render and the IsletinBay is another beautiful landscape.

    C-ram - looking forward your future works, enjoy your new apartment smiley

    Two still renders using Horo’s SkySC2and SkySC3 hdris.

     

    still03.jpg
    500 x 500 - 126K
    still04.jpg
    500 x 500 - 92K
    Post edited by mermaid010 on
  • JamahoneyJamahoney Posts: 1,791

    Wheew, Mermaid...you always amaze - I simply want that vase on the right (lighting is super).

    Jay

  • HoroHoro Posts: 10,637
    edited June 2017

    Slepalex - thank you. Actually, the clouds are a panorama on a sphere partly lit by an HDRI behind the sphere. From the full sky with a cloud slab, six huge cube faces were rendered and assembled to a spherical panorama. And again rendered for an HDRI. This takes very very long but afterwards, this sphere and HDRI can be used many times and the sky renders in a few minutes.

    Jamahoney - thank you Jay. Looks funny, yes, but it's not the horizon and not where the water ends, it's where the the water gets deep (well, where the terrain ends but then, no terrain deep water). By the way, I've learned a lot from constructive critiques and questions inspire to investigate more deeply, which has again a learning effect.

    c-ram - thank you Marco. Great movie. The landscape reminds me of my renders, also no vegetation wink I hope your moving will be painless and fast so we can marvel at your renders.

    Mermaid - thank you. Very nice flowery object and vases. Excellently presented.

    Same terrain as above (only double stacked) but looking from the bay back. The clouds are a true slab. The ambient light from a specular convolved HDRI made from that sky. Like the sky above, this one is from the forthcoming Sky Toolbox.

    Burning Clouds

    BurningClouds.jpg
    1200 x 780 - 250K
    Post edited by Horo on
  • JamahoneyJamahoney Posts: 1,791
    edited June 2017

    What can one say about the light, Horo - superb!

    Will definitely invest in the latest Gritstone Hills

    jay

    Post edited by Jamahoney on
  • mermaid010mermaid010 Posts: 5,486
    edited July 2017

    Jay – thanks these vases are priceless freebies laugh

    Horo – another stunning render.

    I re-rendered a fav of mine – stacked terrains, replaced the sky with a sky and a CloudSphere from David and Horo’s Sky Toolbox product. Love the result.

     

    cloudsphere6-stackedterrains.jpg
    900 x 675 - 536K
    Post edited by mermaid010 on
  • HoroHoro Posts: 10,637
    edited July 2017

    Jamahoney - thank you Jay. Mind that only the terrains are from the Gritstone Set, the clouds (Sky Toolbox) are not yet available.

    Mermaid - thank you. Very well done scene, the light is excellent.

    Having some fun with the Gritstone set, terrains (triple stacked), materials and sky are all from this set. Slight material modification to get a bit of mud on the shore of the small lake.

    Lochket

    Lochlet.jpg
    1200 x 765 - 215K
    Post edited by Horo on
  • JamahoneyJamahoney Posts: 1,791
    edited July 2017

    Ay, Mermaid, looks the heather highlands are-a-calling (and a time for clearing out the Ticks after a long walk amongst them - a bloody nuisance-of-a-bug that can cause Lyme disease - from smelly socks and sweaty boots). Now where is me ole Rabbie Burns poetry book wink 

    Gorgeous, Horo...flyover animations would be super - if I have the time will explore: phew, that lake, and others, in the distance is/are so enticing...times.

    Jay

    Post edited by Jamahoney on
  • mermaid010mermaid010 Posts: 5,486

    Thanks Jay and Horo

    Horo - wow, once again a beautiful landscape.

  • HansmarHansmar Posts: 2,929

    Horo and Mermaid: Great renders with beautiful light and atmosphere.

  • mermaid010mermaid010 Posts: 5,486

    Thanks Hansmar

This discussion has been closed.