Loading...
> >

Daz 4.6 missing items in contet manager

2»

Comments

  • JimmyC_2009JimmyC_2009 Posts: 8,891
    edited December 1969

    How are you loading these items?

    I have the Denver, and it loads with all it's morphs intact for me in DS4.6. I am loading it from the Content Library, where are you loading yours from, and if you load it from the Content Library pane, does it have all of it's morphs?

  • aceviper64_24749e6451aceviper64_24749e6451 Posts: 0
    edited July 2013

    it's not the hair the hair is fine.
    but all the items in the wardrobe pretty much are missing most or all of their morphs.
    here is a pic of the genesis super suit missing all of its morphs.

    oh, and it does this whether I load it from the smart content or the content library.

    dazmo4.png
    1024 x 768 - 167K
    Post edited by aceviper64_24749e6451 on
  • JimmyC_2009JimmyC_2009 Posts: 8,891
    edited December 1969

    You have the supersuit 'chest' selected.

    Make sure that you have the 'Supersuit' selected in the Parameters pane, then look under Actor > Upper Body > Torso. My sliders are coloured, Blue, Green and Yellow.

  • SzarkSzark Posts: 10,634
    edited July 2013

    I just checked and some parameters should show up in the Shaping Pain even with the supersuit chest selected.

    These items you are having trouble with have you tried reinstalling them making sure they go in to the correct content folder?

    Post edited by Szark on
  • aceviper64_24749e6451aceviper64_24749e6451 Posts: 0
    edited December 1969

    re installing the super suit worked,
    so i'll just re install all the clothes in the wardrobe.

    thanks:)

  • viniciuscl_08d63d4917viniciuscl_08d63d4917 Posts: 120
    edited December 1969

    Hi Szark

    I updated to DS 4.6 too, and your Re-import metadata tip helped me a lot, but I still can't figure how to fix the "Genesis Evolution Morph Bundle". It's not in the Shaping panel. I tried download and instal again and it didn't work too.

    Thanks

  • SzarkSzark Posts: 10,634
    edited December 1969

    Mine are in the Shaping Pane in DS4.6 many of them under Universal > Proportions listed under each section of the body.

    So the morphs install without any errors, correct?

    How do you know there are not showing? Have you tired looking for individual morphs that correspond to the Morph Bundle?
    They won't be listed under a heading Genesis Evolution Morph Bundle but spread out under different body parts.

    EVo.jpg
    1164 x 817 - 256K
  • viniciuscl_08d63d4917viniciuscl_08d63d4917 Posts: 120
    edited December 1969

    These basic proportions controls are ok, what I can't find is this stuff that I bought http://www.daz3d.com/genesis-evolution-morph-bundle. These new morphs just vanished.

  • SzarkSzark Posts: 10,634
    edited December 1969

    That is what my screenshot shows, some of the Evolution Morphs. What exactly are you expecting to see? Are you saying what I show don't show for you? Is this for Genesis 1 not Genesis 2?

  • JaderailJaderail Posts: 0
    edited December 1969

    The Evolution Morph Bundle is spread over many Areas of the Figure. They are not listed in one place like the Morphs++ were in DS3.

    Capture1.png
    404 x 916 - 139K
  • viniciuscl_08d63d4917viniciuscl_08d63d4917 Posts: 120
    edited December 1969

    Hi Szark and Jaderail

    I'm not a DS hard user, so maybe I got something wrong. But what I'm saying is although some stuff of that bunle is shown properly, like Emaciated and Voluptuous, a lot of other things I have no Idea where they are, things like Face Flat, Heart, Round, Square, Young, stuff like Nose Bridge Depth, Bridge Height, Bridge Slope, Bridge Width, etc.

    Daz_02.JPG
    1381 x 1002 - 81K
    Daz_01.jpg
    1381 x 1002 - 77K
  • viniciuscl_08d63d4917viniciuscl_08d63d4917 Posts: 120
    edited December 1969

    sorry, the correct face parameter printscreen, with just Jaw proportion

    Daz_03.JPG
    1381 x 1002 - 78K
  • JaderailJaderail Posts: 0
    edited August 2013

    To find them I just select Genesis, not the head, and use Shaping>Face. Click image for full size.

    Capture1.png
    414 x 889 - 73K
    Post edited by Jaderail on
  • viniciuscl_08d63d4917viniciuscl_08d63d4917 Posts: 120
    edited December 1969

    I'm still lost, I go there, but there's only "Jaw Size", but it used to be all that stuff just like you.

  • SzarkSzark Posts: 10,634
    edited December 1969

    Yep so they did get installed...SNAP see my pic below. Like I asked above what do expect to see?

    Have you tried looking in other areas like under the Universal heading or Nose for Nose Bridge etc sliders. ;).

    EVo1.jpg
    1273 x 884 - 362K
  • JimmyC_2009JimmyC_2009 Posts: 8,891
    edited December 1969

    a lot of other things I have no Idea where they are, things like Face Flat, Heart, Round, Square, Young, stuff like Nose Bridge Depth, Bridge Height, Bridge Slope, Bridge Width, etc.


    If you use the Parameters pane, like I do, then select Genesis in the Scene pane, then go to the Parameters pane, select Actor > Head > Face as shown below, and you will find the morphs you are looking for.
    Untitled-1.jpg
    572 x 848 - 253K
  • viniciuscl_08d63d4917viniciuscl_08d63d4917 Posts: 120
    edited December 1969

    My first printscreen shows Nose shapping control, but all that extra sliders aren't there anymore. As I said, the oddity is other extra morph controls shown, like Emaciated, Voluptuous, etc. But all these other ones are vanished.

  • JimmyC_2009JimmyC_2009 Posts: 8,891
    edited December 1969

    My first printscreen shows Nose shapping control, but all that extra sliders aren’t there anymore


    The other sliders are NOT in there. Please follow my post above. Go to the Parameters pane, Actor > Head > Face, and you will find them all there. You are looking in the wrong place!
  • JimmyC_2009JimmyC_2009 Posts: 8,891
    edited December 1969

    If you are looking for the Nose morphs in the Shaping pane, then they are under 'Nose'. If you can't see them there, please click on Nose in your Shaping pane, and post a screenshot of what is in there.

  • JaderailJaderail Posts: 0
    edited December 1969

    This is correct, Just select Genesis, go to Shaping and do Nose they should list.

  • viniciuscl_08d63d4917viniciuscl_08d63d4917 Posts: 120
    edited December 1969

    I found it! You guys are great!

    I'm just a designer, I use DS just as reference to my comics.

    Thanks a lot!

  • viniciuscl_08d63d4917viniciuscl_08d63d4917 Posts: 120
    edited December 1969

    I found it! It was in Parameter Pane, I'm a little dumb in 3D softwares

    I’m just a designer, I use DS just as reference to my comics.

    Thanks a lot!

Sign In or Register to comment.