Lara Croft for DAZ3D?

maria285sgmaria285sg Posts: 0
edited July 2018 in The Commons

Can someone tell me which figure I can use to make a Lara Croft like this?

I'm looking for a model that looks like the one of guardian of light, not what comes after, and not the Angelina Jolie.
Help someone please?

Post edited by Chohole on

Comments

  • alienareaalienarea Posts: 526

    There are some that look like Angelina Jolie (more or less), if you do not want that look go for the face and body morphs and start building from Genesis 8 Female.

  • I think the intent of smay's Stalker Girl was Tomb Raider, but it's all the original Genesis.
    https://www.daz3d.com/stalker-girl
    https://www.daz3d.com/stalker-girl-hair
    etc

    Slide3d's Vault Rustler was also Tomb Raider-inspired, but I don't think there was a model that went with it. Also, it's Genesis 2. This isn't so much a problem with the equiment, though.
    https://www.daz3d.com/vault-rustler-equipment
    https://www.daz3d.com/vault-rustler

    exnem at Rendo has a bunch of appropriate gear for Lara Croft, including Genesis 3 (which is portable with Genesis 8).

    As for model... eh... Genesis 3, probably.
    I'd start with Rune 7 because she's got the gravity-defying anatomy.
    https://www.daz3d.com/rune-7

    Gia 7 would be the other one, but she's no Rune 7 in the chestal area.
    https://www.daz3d.com/rune-7

  • FSMCDesignsFSMCDesigns Posts: 12,755
    edited July 2018
    laura.jpg
    1000 x 1300 - 245K
    Post edited by FSMCDesigns on
  • For the more stylized as shown in the OP, I'd start with Genesis 2 Female with the Body and Head Morphs, and The Girl 6. Dial in about 50% The Girl Body to get the hourglass figure and flotation devices, maybe 20% The Girl Head to get the proportions to match, and tweak accordingly.

  • JOdelJOdel Posts: 6,286
    edited July 2018

    The facial features of the example put me a bit in mind of the Pretty Base character from Mytilus and Pretty3D. There've been a number of iterations of her, for different generations. I'm pretty sure she started as a V4 character, so it would be possible to GenX the original morph as far as G3. Although the vendors also have done iterations of her for G3 and G8.

    Don't know which generation the original poster is using, but that might be something else to check. I agree with Dr Newcenstein about dialing in some version of the Girl for the body morph. Fortunately there are a number of those.

    Post edited by JOdel on
  • PaintboxPaintbox Posts: 1,633
    edited July 2018

    Yeah the Laura character is pretty close.

    Is there a look a like of the new Lara? I just finished Rise of the Tomb Raider and the animation was so lifelike, really impressive. The art is top notch. Cant wait for Shadow of the Tomb Raider!

     

    B3229024-D671-41E1-886D-870A0E2C38B5.jpeg
    1600 x 900 - 263K
    Post edited by Paintbox on
  • bk007dragonbk007dragon Posts: 113
    edited July 2018

    Can someone tell me which figure I can use to make a Lara Croft like this?

    I'm looking for a model that looks like the one of guardian of light, not what comes after, and not the Angelina Jolie.
    Help someone please?

    Look at Retro Heroine by Fredel at the other store.   Fredel has freebe outfits for tomb raider.  Exnem has an Action Girl outfit and Holster & Guns that look tombraider also.

    All are Genesis 3 Female.

    The Daz store has several scenes which are very tomb raidery, especially in Stonemason's catalog.

     

     

    Post edited by bk007dragon on
  • IllidanstormIllidanstorm Posts: 655
    edited July 2018

    https://www.renderosity.com/mod/freestuff/contributor/Fredel

    its all free

    There isn't really a model that looks like the original Lara Croft out there. You have to make your own. Surprisingly I had much luck with this character https://www.daz3d.com/gwennili-hd-for-victoria-7 with some adjustments to the skin.

    Post edited by Illidanstorm on
  • WonderlandWonderland Posts: 6,890

    The character looks very similar to Pretty Base but it's fun to create your own characters by spinning dials...

    IMG_0514.JPG
    960 x 1248 - 159K
  • The character is easy.  Do a little dial spinning on Pretty3D's Pretty Base NG (G3) & Pretty Base NG8 (G8).  I used Lyoness's Boom Chicka Plus face morph on Pretty Base NG8 with a few odds and ends.  Here is what I came up with.

    Lara Croft Pretty Base NG 8 Test.jpg
    1080 x 1404 - 325K
  • billyben_0077a25354billyben_0077a25354 Posts: 771
    edited July 2018

    Here's another one closer to what you are looking for.

    Pretty Base NG 8
    Boom Chica Plus Face Morph
    Eyes Angled Morph -100%
    OOT Sleek Ponytail Hair
    Basic Wear Sports Bra with white material preset.
    Fredel's free Retro Heroine shorts with a green cloth shader (available at the other site)
    Fredel's free Retro Heroine Gunbelt (available at the other site)
    Fredel's The Gun (available at the other site, not a free item)
    Exem's Action Girl Boots for G3.

    Hope This Helps

     

    Laura Croft Test 3.jpg
    1080 x 1404 - 368K
    Post edited by billyben_0077a25354 on
  • billyben_0077a25354billyben_0077a25354 Posts: 771
    edited July 2018

    Found a model I have that needs no face morphs.  Aurore for G3 & G8 by Kayleyss.  To give her the narrow waist in your image, I I used -60% waist morph from the DAZ Genesis 8 Body morph set.  Aurore has 3 skin tone options (I used the tan skin tone).  Since she is a model for both G3 & G8, should fill your needs for a Lara Croft model very easily.

    Other Items used in the image:
    OOT Sleek Ponytail Hair
    Basic Wear Sports Bra with white material preset.
    Fredel's free Retro Heroine shorts (available at the other site)
    Fredel's free Retro Heroine Gunbelt (available at the other site)
    Fredel's The Gun (available at the other site, not a free item)
    Mytilus Star Warrior Outfit Boots

    Lara Croft Test 6.jpg
    1080 x 1404 - 546K
    Post edited by billyben_0077a25354 on
  • Silas3DSilas3D Posts: 565

    I used Fredel's Retro Heroine G3F as a base and dial spun from there for my Lara:

  • FSMCDesignsFSMCDesigns Posts: 12,755

    Nice Lara Silas3D! What other morphs did you use, just the DAZ ones?

  • Silas3DSilas3D Posts: 565
    edited July 2018

    Thanks! Other than Fredel's heroine morph then yes, DAZ morphs for specific facial zones. I've also done a doppelgänger variant:

    Post edited by Silas3D on
  • Does anyone know what is the name of the white bra and hairstyle used in the image below please?? 

    There is this https://www.daz3d.com/laura-for-genesis-3-female-s

     

     

     

  • DustRiderDustRider Posts: 2,744

    I'd also like to know what hair that is!

  • IllidanstormIllidanstorm Posts: 655
    edited March 2019

    @Dustrider I just linked to it one post above you.

    Edit: actually its exactly this one https://www.renderosity.com/mod/bcs/hr-046/72917

    Post edited by Illidanstorm on
  • DustRiderDustRider Posts: 2,744

    Thanks!!

  • TaozTaoz Posts: 9,941

    @Dustrider I just linked to it one post above you.

    Edit: actually its exactly this one https://www.renderosity.com/mod/bcs/hr-046/72917

    It's cheaper on her own site:

    https://www.mankahoo.com/index.php?l=product_detail&p=90

  • Rev2019Rev2019 Posts: 167

    not Lara Croft But..

     

    R1.jpg
    1130 x 774 - 578K
  • Rev2019 said:

    not Lara Croft But..

     

    I'm sorry, I don't mean to be rude, but I'm confused.

    You brought this thread back after about 18 months to post a pic of something other than the OT?  

    Who is this?  I think it just went over my head or something lol

  • Tomb Raider Underworld Lara

    Just Lara 05 widescreen 1920x1070.jpg
    1920 x 1080 - 850K
  • ed3Ded3D Posts: 2,196

    an  interesting subject  (  Tomb Raiderz )   +  Thanx

Sign In or Register to comment.