Loading...
> >

I need a screw

WendyLuvsCatzWendyLuvsCatz Posts: 38,200
edited December 1969 in Carrara Discussion

or a bolt
a threaded cylinder to be precise
while I am certain this can be done in the spline modeler
which is a complete mystery to me
I was trying a vertex cylinder with a displacement map using the caution lines operator
which I got to work beautifully as a diffuse channel creating an all around candy stripe with cylindrical mapping in shader room and planar uv mapping
but weird shapes in displacement with subdivision and a very low amplitude
applying it to displacement froze up carrara eventually and it will now not recover at all
for all I knew it worked but now I have lost all my project as it has gone white and alas beyond salvation

Comments

  • That Other PersonaThat Other Persona Posts: 381
    edited April 2014

    Your title will probably get a few people to check the thread!

    I am learning the vertex modeller myself and know that somewhere in a training vid I saw something that would possibly help you, but I cannot recall where.

    I did find this tool set on the store:
    http://www.daz3d.com/tools-and-toolbox

    About the crash... are you on Mac or PC? Can you quit and restart or doe stat crash as well? I ask this because I just had a serious crash that refused to be fixed...

    Post edited by That Other Persona on
  • 3DAGE3DAGE Posts: 3,311
    edited December 1969

    I'm here for you Wendy :)

    there was a Tut a long time ago, for making a screw-in light bulb, but I've no idea where that would be now.

    What about trying the Interpolated Curve, to draw a curved and flexible shape (like the Vines in another thread)
    then sweep that with a circle or a "D" shape, so the flat edge is against your cylinder.

    It's not a great solution, but it's an option.

    I've had a feature request since C7 for a Helix tool in the VM.

    the spline modeller can do it,. easily,. then you could convert to Vertex modeller.

    In the Spline Modeller:
    Create a small oval,..
    Go to the Geometry menu / Extrusion Preset / Spiral

    set the number of turns and click ok, for a Basic Spiral "spring"

    Hope it helps :)

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    I want to make my own model so nothing in store of any use
    the freeze was a bad choice of leaving Auto update on in shader room
    displace in 3D view and looking at result in assembly room is less freeze inclined
    has not crashed just frozen unresponding whited out as I tried Esc to stop the auto update render
    am giving it time in the hope I do not lose the rest of my model
    which stupidly I did not save

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    thank you Andy
    I will try that if my scene recovers

  • VarselVarsel Posts: 574
    edited December 1969

    You can use Sparrowhawks spring plugin.
    http://www.sparrowhawke3d.com/

    I used it for the initial shape.
    To get a full bolt or screw, some modelling are required.

    First create the spring.
    Convert to vertex object.
    Untriangulate polygons.
    Select the inside line, and delete.
    Weld the object.
    And crease the inner and outer shape of the screw part.
    Add smoothing.

    Part1.jpg
    741 x 600 - 158K
    Part2.jpg
    1607 x 600 - 407K
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    thanks to Andy I got what I was after but other ideas helpful too
    I just wish my first instance of carrara could start responding again so I do not need to redo all my unsaved model which was going fine until I got to the screw

    Doc2.png
    1920 x 1080 - 563K
  • wetcircuitwetcircuit Posts: 0
    edited December 1969

    Coming back to post that Blender has a "screw tool" but it doesn't look that different than the Spline Modeler's spyral tool,
    http://wiki.blender.org/index.php/Doc:2.6/Manual/Modeling/Meshes/Editing/Duplicating/Screw

    and I thought of Sparrowhawke's Spring but Varsel was way more advanced.

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    you would all be horrified at what I am modelling
    a choke pear
    it is placed in the mouth of a blasphemer and the screw turned opening the leaves
    well so claimed
    I actually believe it is one of those fanciful torture devices like the iron maiden that were never actually used just created later by castle owners for their "collections" to add notoriety to their ancestors for tourist attraction
    it supposedly had other points of insertion for homosexuals and abortion performing midwives.

    Doc1.png
    1920 x 1080 - 386K
  • Design AcrobatDesign Acrobat Posts: 459
    edited December 1969

    Varsel said:
    You can use Sparrowhawks spring plugin.
    http://www.sparrowhawke3d.com/

    I used it for the initial shape.
    To get a full bolt or screw, some modelling are required.

    First create the spring.
    Convert to vertex object.
    Untriangulate polygons.
    Select the inside line, and delete.
    Weld the object.
    And crease the inner and outer shape of the screw part.
    Add smoothing.

    That looks like a nice incline plane that is continuous like it should be. Thanks for showing.

    Reminds me of this tutorial on Youtube, but yours is easier with that plug-in.

    https://www.youtube.com/watch?v=6ihO5yH7mCQ

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    ok finished but not working
    running a physics sim the leaves fell off instead of swinging
    only made leaves physics motion
    as not expecting screw to work in thread though that would be nice

    pear3.png
    1920 x 1080 - 519K
    pear2.png
    1920 x 1080 - 3M
    pear1.png
    1920 x 1080 - 705K
  • ncampncamp Posts: 345
    edited December 1969

    Probably too late, but there is a great tutorial at renderosity for making threads using the spline room for Carrara.

    http://www.renderosity.com/mod/tutorial/?tutorial_id=2455

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    I made a very disturbing age restricted video

  • TangoAlphaTangoAlpha Posts: 4,584
    edited December 1969

    That's interesting - I'm trying to make a rope, which is probably not all that different...

  • RitaCelesteRitaCeleste Posts: 625
    edited December 1969

    HA! my daughter came in while I was watching the video and said, "DON'T BUY THAT MOM!" I think she was afraid I'd hunt a real one. lol. Yeah, I know nothing about modeling and the title still reeled me in. heh Great job by the way!

  • DartanbeckDartanbeck Posts: 21,543
    edited December 1969

    Ouchies! Yikes, Wendy... I'm glad I'm on your side! :ahhh:
    Yeah... nice choke pear.
    You know I'm not a blasphemer, right?
    Oh my!

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    I put the Daz studio rigged .duf on sharecg if anyone interested
    will not link as not family friendly

  • DartanbeckDartanbeck Posts: 21,543
    edited December 1969

    Thanks Wendy.
    Say, did you end up using Sparrowhawkes spring primitive for that?

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    no just Andy's suggestion in spline modeler
    took a few tries but got there

  • DartanbeckDartanbeck Posts: 21,543
    edited December 1969

    wendy♥catz said:
    no just Andy's suggestion in spline modeler
    took a few tries but got there
    Sweet. Looks really nice!
  • 3DAGE3DAGE Posts: 3,311
    edited December 1969

    Looks good Wendy :)

    glad it worked well for you,. but slightly embarrassed that I forgot about Sparrowhawkes Spring ....Doh

    :)

  • DartanbeckDartanbeck Posts: 21,543
    edited December 1969

    3DAGE said:
    Looks good Wendy :)

    glad it worked well for you,. but slightly embarrassed that I forgot about Sparrowhawkes Spring ....Doh

    :)

    You're embarrassed about that... but not about what your tutorial produced? ;)
    Have you seen the video? :ahhh:

    Kidding!
    It did turn out great, Wendy! Get it... 'turned out' great? :bug:

  • 3DAGE3DAGE Posts: 3,311
    edited December 1969

    I always expect the Spanish inquisition :)

    Interesting clips Wendy,.
    I thought I knew a lot about history, especially that era, but that's an intricate contraption I'd never heard of.

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,200
    edited December 1969

    I saw it on the TV program Bones and roughly based mine on this wikipedia image

    1280px-Oral_pear.jpg
    1280 x 941 - 181K
  • TangoAlphaTangoAlpha Posts: 4,584
    edited December 1969

    I must admit I half expected it to go somewhere else -- the medievals were not noted for being fussy about which holes their torture devices went into!

Sign In or Register to comment.