dragon gold set

shanteshante Posts: 206
edited December 1969 in Product Suggestions

Years ago when I believe the first DAZ dragon was offered there was a product offered, free I believe but could be wrong. that was like the Dragon Horde except it looked like a cave, with piles of gold around and a post to tie a captive to in the presence of the dragon. i got it then and reloaded it a second time for a render, but can't find now it in my hundreds of CDS. Because it was offered before DAZ had the member order history in effect I can't re-download it now.

Does anyone remember what the product was? Was it a freebie? On the of chance it was,where is the old freebie page from freebies of the past or has DAZ removed that page?

Comments

  • SzarkSzark Posts: 10,634
    edited May 2014
    Post edited by Szark on
  • cecilia.robinsoncecilia.robinson Posts: 2,208
    edited December 1969

    Szark said:

    Actually, "Dragon's Treasure" requires "Mystery Cave" if I'm right.

  • SzarkSzark Posts: 10,634
    edited December 1969

    yeah that is what I put. :)

  • Richard HaseltineRichard Haseltine Posts: 101,349
    edited December 1969

    Moved to Product Suggestions as it's a request for, not an offer of, a freebie. The Freepozitory is not for asking for freebies, except via the request thread here http://www.daz3d.com/forums/discussion/30004/

  • shanteshante Posts: 206
    edited December 1969

    Moved to Product Suggestions as it's a request for, not an offer of, a freebie. The Freepozitory is not for asking for freebies, except via the request thread here http://www.daz3d.com/forums/discussion/30004/

    Actually I wasn't sure if in fact it was a freebie here at daz or a store item. I figured it it was in fact a DAZ freebie I wanted to know where the link to the older freebies was. If wrong forum, sorry.

  • LindseyLindsey Posts: 1,999
    edited December 1969

    There was Dragon's Lair by Stonemason in the DAZ Free Archive. It consisted of a cave figure and a bunch of props (land bridge, dragon's throne, assorted stalagmites, various pots and the Dragon's pot of gold). Unfortunately, the DAZ Free Archive is no longer online and that's the only legitimate way to have obtained it. Search your CD archives for the installer: ps_fr215_DragonsLair.exe and you might luck out.

    ps_fr215.jpg
    192 x 250 - 51K
  • Sfariah DSfariah D Posts: 26,361
    edited December 1969

    Okay trying to post this again. I am thinking of working on a project which deals with hoards of different things. The first project would be hoards of coins. I just need some quality time with hexagon to get it made. If there is any interest I can see if I can publish it and the rest of the series that is if I can get it good enough quality.

  • shanteshante Posts: 206
    edited December 1969

    Lindsey said:
    There was Dragon's Lair by Stonemason in the DAZ Free Archive. It consisted of a cave figure and a bunch of props (land bridge, dragon's throne, assorted stalagmites, various pots and the Dragon's pot of gold). Unfortunately, the DAZ Free Archive is no longer online and that's the only legitimate way to have obtained it. Search your CD archives for the installer: ps_fr215_DragonsLair.exe and you might luck out.

    The title sounds right but the image is all wrong. The item I remember had piles of gold and rock walls like a cave but it had a post in the middle of the room in a mound with the treasure all around it. Is this the only thumb you found with the product?

  • LindseyLindsey Posts: 1,999
    edited December 1969

    There is no scene preset, so I threw this together with the primary cave figure and a bunch of props that I had to manually place in the scene. This is a preview render. The content icons are from the props category in the Poser format library.

    Props.jpg
    340 x 558 - 40K
    dragons_lair.jpg
    1386 x 922 - 363K
  • Sfariah DSfariah D Posts: 26,361
    edited December 1969

    I stumbled upon this item this morning http://www.daz3d.com/sales-promotions/pirate-s-treasure it is pirate not dragon but similar to what you described.

  • JaderailJaderail Posts: 0
    edited December 1969

    I checked out the Dragons Lair stuff in DS4.6.3 last night. The Poser texture mats are a big let down now. The set looks nothing like it did in the old DS3 days. Even with the proper tweeks. It's okay for long shots but will never do for a single close shot.

  • Design Anvil - Razor42Design Anvil - Razor42 Posts: 1,237
    edited May 2014

    I have a Dragons gold set currently in my work list, its probably about 80% complete. So if theres anything particular you're looking for in a set let me know.

    At the moment I have varying piles of coins with gems scattered on them single coins and gems. Goblets and Plates. Sword, Helmet and breastplate. Some shaders to match.

    Love to hear any thoughts or requests for inclusions.

    Heres a quick mockup of a promo just a WIP atm but you can see where its heading.

    Preview.jpg
    1000 x 1300 - 552K
    Post edited by Design Anvil - Razor42 on
  • JaderailJaderail Posts: 0
    edited December 1969

    Razor 42 said:
    I have a Dragons gold set currently in my work list, its probably about 80% complete. So if theres anything particular you're looking for in a set let me know.

    At the moment I have varying piles of coins with gems scattered on them single coins and gems. Goblets and Plates. Sword, Helmet and breastplate. Some shaders to match.

    Love to hear any thoughts or requests for inclusions.

    Heres a quick mockup of a promo just a WIP atm but you can see where its heading.

    Very nice. I will be on the watch for this as I'm currently hard at work on a rather Large AD&D based series of renders. This would fill a need in my work. I'm not far enough in to need this yet so I'll not rush you. Looks very useful and just right.
  • shanteshante Posts: 206
    edited December 1969

    Razor 42 said:
    I have a Dragons gold set currently in my work list, its probably about 80% complete. So if theres anything particular you're looking for in a set let me know.

    At the moment I have varying piles of coins with gems scattered on them single coins and gems. Goblets and Plates. Sword, Helmet and breastplate. Some shaders to match.

    Love to hear any thoughts or requests for inclusions.

    Heres a quick mockup of a promo just a WIP atm but you can see where its heading.

    looks nice but please also make it to work in versions of Poser(7) and up w/o the darn importer thingie.
    Would be nice if there was a good cave setting and high enough resolution for c/u images. And alo a post with ties to hold a damsel in distress to be saved. :)

  • Design Anvil - Razor42Design Anvil - Razor42 Posts: 1,237
    edited May 2014

    I should be able to include everything available in Poser .pp2 format alongside the duf for DS.
    I'll have a look at also including a sacrificial post of some kind.

    Unfortunately a cave may be a bit beyond the scope of this set.
    Trying to keep the price down bit by keeping this as a prop set.

    Post edited by Design Anvil - Razor42 on
  • Design Anvil - Razor42Design Anvil - Razor42 Posts: 1,237
    edited December 1969

    Finishing up the Sacrificial Pole Prop today, some minor touchups to do but pretty much done,

    POLEPREVIEW.jpg
    800 x 805 - 71K
  • JaderailJaderail Posts: 0
    edited December 1969

    Razor 42 said:
    Finishing up the Sacrificial Pole Prop today, some minor touchups to do but pretty much done,

    OOoo... I like that. I can see many uses for it as well. Waiting with CC in hand... just hope it has money on it...
  • Sfariah DSfariah D Posts: 26,361
    edited December 1969

    Jaderail said:
    Razor 42 said:
    Finishing up the Sacrificial Pole Prop today, some minor touchups to do but pretty much done,

    OOoo... I like that. I can see many uses for it as well. Waiting with CC in hand... just hope it has money on it...

    Steps in line behind Jaderail. This looks great!

  • Design Anvil - Razor42Design Anvil - Razor42 Posts: 1,237
    edited May 2014

    Unfortunately I needed to drop the Poser support for the initial release of this one (DA Dragons Gold).

    I prefer to spend the time getting everything working exceptionally in one App (In this case DS) rather than spend the time delivering a more average result in two apps. The time it would of taken to redo the mats and setups for Poser would affect the final price and I dont want to charge DS users more to have the Poser Mats included. If the demand is there I'll look at doing a separate Poser version with Poser Mats. My apologies to any Poser users who had there eye on this set.

    The Good news is the Daz Studio version is in testing!

    Teaser1.jpg
    800 x 1040 - 236K
    Post edited by Design Anvil - Razor42 on
Sign In or Register to comment.