[In store now] Felidae by AM - Snow Leopard [Commercial]

Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
edited October 2020 in Daz PA Commercial Products

For the folks interested, Snow Leopard is now finally available: https://www.daz3d.com/felidae-by-am--snow-leopard

"Mysterious, beautiful and very difficult to spot, the Snow Leopard is native to the mountain ranges of Central and South Asia and like all the other big cats, is critically endangered.

Finely reproduced for Daz Studio and built on the Lion base figure, the Snow Leopard is a must-have, coming with a wide collection of poses, morphs, and controls to customize and finely tune every detail.

Get the Snow Leopard for your outdoors, prehistoric or storybook projects!

Optimized for both Iray (dForce and Catalyzer) and 3Delight. Catalyzer version 1.9 required for use with the Catalyzer Iray figures."

 

SnowLeopard_AM-main.jpg
2000 x 2600 - 1M
SnowLeopard_AM-popup2.jpg
2000 x 3010 - 2M
SnowLeopard_AM-popup3.jpg
2667 x 1500 - 1M
SnowLeopard_AM-popup1.jpg
2000 x 1769 - 1M
SnowLeopard_AM-popup4.jpg
2000 x 3554 - 2M
Post edited by Chohole on
«134

Comments

  • eshaesha Posts: 3,240

    I love it! That's one of my favorite big cats.

    And the promos look great! I know it's a predator but it looks so fluffy, I want to cuddle it laugh

  • lilweeplilweep Posts: 2,488

    i kind of like your snow shader, any possibility of sharing that?

     

    Also, how did you do this snowy fur btw:

     

    alessandro-mastronardi-after-the-storm.jpg
    1920 x 1920 - 743K
  • lilweep said:

    i kind of like your snow shader, any possibility of sharing that?

    The snow in that image is Blender, so no compliant snow shader for DS.

    lilweep said:

     

    Also, how did you do this snowy fur btw:

    That's Photoshop...

     

  • FishtalesFishtales Posts: 6,119
    edited June 2020

    Very nice it is too.

    Snow Leopard Catalyzer

    2020-06-24 10:28:54.144 Total Rendering Time: 4 minutes 59.13 seconds

    Click on image for full size.

    snow-leopard-catalyzer-copyright-001.jpg
    1920 x 1080 - 2M
    Post edited by Fishtales on
  • Carola OCarola O Posts: 3,823

    It's Beautiful! How I have waited for this lovely cat.. mind you, I will have to wait to get it but I certainly will as soon as I can!

  • LintonLinton Posts: 542

    Beautiful work, purchased and downloading now!

  • c567591ac567591a Posts: 44
    edited June 2020

    I am having issues getting it to dforce simulate the hair. 

    I have restarted a couple times. 

    I have tried the Iray dForce version as well as the plain Snow Leopard and added the hair. 

    Error:

    2020-06-24 11:56:55.603 WARNING: ..\..\..\src\dzdynamicsengine.cpp(2691): ERROR: clCreateBuffer (-61)

    2020-06-24 11:56:55.847 Total Simulation Time: 2.99 seconds

    It does render, it just looks like someone static'ed his hair.

    Any thoughts?  

    DazSnowLeopardIssues_20200624.PNG
    472 x 509 - 130K
    DazSnowLeopardIssues_20200624_02.PNG
    109 x 162 - 10K
    Post edited by c567591a on
  • memcneil70memcneil70 Posts: 4,115
    edited June 2020

    After two times trying to do an Iray Catlyzer render of the Snow Leopard and a UltraScenery, Daz stuck on the 4th iteration of the fur building or something. I just checked my NVidia and found a new update was released today, so it is downloading. But, can the cat and UltraScenery work together?

    Additional information: After updating the Nvidia update still didn't work. Checked the promo sheet, said I needed version 1.9, but I couldn't find any indication of that version, so opened DIM, uninstalled and reinstalled. Checked and my plug-in still shows okay in the Help menu. Reloaded the file, closed off the environment completely and just tried to render the cat. And stuck at the same place.

    'Snow Leopard: inspecting shave group #4'

    I am attaching a snip.

    I have also tried the release and the Beta version of Daz Studio 4.12. 
    Am I just impatient or am I doing something wrong?

    Mary

     

    Stuck Again.PNG
    784 x 630 - 27K
    Post edited by memcneil70 on
  • memcneil70memcneil70 Posts: 4,115

    I saw in your other thead a request for the log file. This is from the latest freeze:


    2020-06-24 11:29:52.728 *** Scene Cleared ***
    2020-06-24 11:30:01.262 File loaded in 0 min 10.6 sec.
    2020-06-24 11:30:01.266 Loaded file: Strayed into Woods.duf
    2020-06-24 11:30:01.610 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.615 Loaded file: JCM-SnowLeopardAM-rThighTwistNeg.dsf
    2020-06-24 11:30:01.622 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.623 Loaded file: JCM-SnowLeopardAM-rThighSidePos.dsf
    2020-06-24 11:30:01.629 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.629 Loaded file: JCM-SnowLeopardAM-rThighBendNeg.dsf
    2020-06-24 11:30:01.636 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.637 Loaded file: JCM-SnowLeopardAM-rShldrTwistPos.dsf
    2020-06-24 11:30:01.642 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.648 Loaded file: JCM-SnowLeopardAM-rShldrSideNeg.dsf
    2020-06-24 11:30:01.655 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.655 Loaded file: JCM-SnowLeopardAM-rShldrBendPos.dsf
    2020-06-24 11:30:01.663 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.663 Loaded file: JCM-SnowLeopardAM-rShinBendPos.dsf
    2020-06-24 11:30:01.669 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.670 Loaded file: JCM-SnowLeopardAM-rHindPawBendPos.dsf
    2020-06-24 11:30:01.676 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.681 Loaded file: JCM-SnowLeopardAM-rHindFootTwistPos.dsf
    2020-06-24 11:30:01.688 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.688 Loaded file: JCM-SnowLeopardAM-rHindFootSideNeg.dsf
    2020-06-24 11:30:01.694 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.696 Loaded file: JCM-SnowLeopardAM-rHindFootBendNeg.dsf
    2020-06-24 11:30:01.701 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.703 Loaded file: JCM-SnowLeopardAM-rFrontPawBendPos.dsf
    2020-06-24 11:30:01.709 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.714 Loaded file: JCM-SnowLeopardAM-rFrontFootTwistNeg.dsf
    2020-06-24 11:30:01.720 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.721 Loaded file: JCM-SnowLeopardAM-rFrontFootSidePos.dsf
    2020-06-24 11:30:01.728 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.728 Loaded file: JCM-SnowLeopardAM-rFrontFootBendPos.dsf
    2020-06-24 11:30:01.735 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.735 Loaded file: JCM-SnowLeopardAM-rForeArmTwistPos.dsf
    2020-06-24 11:30:01.742 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.746 Loaded file: JCM-SnowLeopardAM-rForeArmBendNeg.dsf
    2020-06-24 11:30:01.756 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.757 Loaded file: JCM-SnowLeopardAM-rCollarTwistNeg.dsf
    2020-06-24 11:30:01.763 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.764 Loaded file: JCM-SnowLeopardAM-rCollarSidePos.dsf
    2020-06-24 11:30:01.770 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.771 Loaded file: JCM-SnowLeopardAM-rCollarBendNeg.dsf
    2020-06-24 11:30:01.777 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.783 Loaded file: JCM-SnowLeopardAM-neck2TwistPos.dsf
    2020-06-24 11:30:01.792 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.793 Loaded file: JCM-SnowLeopardAM-neck2SidePos.dsf
    2020-06-24 11:30:01.799 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.800 Loaded file: JCM-SnowLeopardAM-neck2BendNeg.dsf
    2020-06-24 11:30:01.807 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.809 Loaded file: JCM-SnowLeopardAM-neck1TwistPos.dsf
    2020-06-24 11:30:01.815 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.821 Loaded file: JCM-SnowLeopardAM-neck1SidePos.dsf
    2020-06-24 11:30:01.827 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.828 Loaded file: JCM-SnowLeopardAM-neck1BendNeg.dsf
    2020-06-24 11:30:01.833 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.834 Loaded file: JCM-SnowLeopardAM-lThighTwistNeg.dsf
    2020-06-24 11:30:01.838 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.841 Loaded file: JCM-SnowLeopardAM-lThighSideNeg.dsf
    2020-06-24 11:30:01.845 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.851 Loaded file: JCM-SnowLeopardAM-lThighBendPos.dsf
    2020-06-24 11:30:01.855 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.857 Loaded file: JCM-SnowLeopardAM-lShldrTwistNeg.dsf
    2020-06-24 11:30:01.861 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.862 Loaded file: JCM-SnowLeopardAM-lShldrSideNeg.dsf
    2020-06-24 11:30:01.866 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.867 Loaded file: JCM-SnowLeopardAM-lShldrBendPos.dsf
    2020-06-24 11:30:01.872 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.877 Loaded file: JCM-SnowLeopardAM-lShinBendPos.dsf
    2020-06-24 11:30:01.882 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.883 Loaded file: JCM-SnowLeopardAM-lHindFootTwistNeg.dsf
    2020-06-24 11:30:01.889 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.891 Loaded file: JCM-SnowLeopardAM-lHindFootSidePos.dsf
    2020-06-24 11:30:01.895 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.896 Loaded file: JCM-SnowLeopardAM-lHindFootBendNeg.dsf
    2020-06-24 11:30:01.900 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.905 Loaded file: JCM-SnowLeopardAM-lFrontPawBendPos.dsf
    2020-06-24 11:30:01.910 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.911 Loaded file: JCM-SnowLeopardAM-lForeArmTwistNeg.dsf
    2020-06-24 11:30:01.916 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.916 Loaded file: JCM-SnowLeopardAM-lForeArmBendNeg.dsf
    2020-06-24 11:30:01.921 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.922 Loaded file: JCM-SnowLeopardAM-lCollarTwistPos.dsf
    2020-06-24 11:30:01.927 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.932 Loaded file: JCM-SnowLeopardAM-lCollarSideNeg.dsf
    2020-06-24 11:30:01.937 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.937 Loaded file: JCM-SnowLeopardAM-lCollarBendPos.dsf
    2020-06-24 11:30:01.944 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.944 Loaded file: JCM-SnowLeopardAM-headTwistPos.dsf
    2020-06-24 11:30:01.952 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.953 Loaded file: JCM-SnowLeopardAM-headSidePos.dsf
    2020-06-24 11:30:01.958 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.963 Loaded file: JCM-SnowLeopardAM-headBendNeg.dsf
    2020-06-24 11:30:01.974 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.975 Loaded file: JCM-SnowLeopardAM-chestTwistPos.dsf
    2020-06-24 11:30:01.986 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.986 Loaded file: JCM-SnowLeopardAM-chestSidePos.dsf
    2020-06-24 11:30:01.992 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:01.992 Loaded file: JCM-SnowLeopardAM-chestBendNeg.dsf
    2020-06-24 11:30:01.998 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:02.003 Loaded file: JCM-SnowLeopardAM-abdomen4BendPos.dsf
    2020-06-24 11:30:02.008 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:02.009 Loaded file: JCM-SnowLeopardAM-abdomen2BendNeg.dsf
    2020-06-24 11:30:02.037 Loaded Morph Deltas in 0 min 0.0 sec.
    2020-06-24 11:30:02.037 Loaded file: Snow Leopard.dsf
    2020-06-24 11:30:09.317 Loaded image Lion-Parts-D.jpg
    2020-06-24 11:30:09.544 Loaded image SnowLeopard-Body-D.jpg
    2020-06-24 11:30:09.706 Loaded image SnowLeopard-Eyes-D.jpg
    2020-06-24 11:30:09.793 Loaded image TA_Upland_01_texture.png
    2020-06-24 11:30:09.855 Loaded image usc_grass_patch_01_512_diffuse.png
    2020-06-24 11:30:10.261 Loaded image usc_tree_01_bark_diffuse.png
    2020-06-24 11:30:11.099 Loaded image USC_Conifer_01_bark_diffuse.png
    2020-06-24 11:30:11.141 Loaded image NTP4-matCone-C.jpg
    2020-06-24 11:30:11.974 Loaded image usc_tree_01_leaf_autumn_diffuse.png
    2020-06-24 11:30:11.981 Loaded image usc_tree_01_leaf_cutout.png
    2020-06-24 11:30:12.034 Loaded image NTP4-matTwigNeedlesDry-C.jpg
    2020-06-24 11:30:12.064 Loaded image NTP4-matTwigNeedlesDry-A.jpg
    2020-06-24 11:30:12.138 Loaded image NTP4-matTwigNeedlesGreen-C.jpg
    2020-06-24 11:30:12.174 Loaded image NTP4-matTwigNeedlesGreen-A.jpg
    2020-06-24 11:30:12.224 Loaded image usc_fallen_leaf_01_diffuse.png
    2020-06-24 11:30:12.234 Loaded image usc_fallen_leaf_01_cutout.png
    2020-06-24 11:34:00.171 Updated metadata for 0 of 1 items.
    2020-06-24 11:34:03.935 WARNING: ..\..\..\..\..\src\sdksource\cloud\dzcloudtasknotifier.cpp(660): sync completed successfully, 1 items succeeded, 0 items failed.
    2020-06-24 11:34:03.935 Metadata update succeeded.
    2020-06-24 11:35:00.168 Updated metadata for 0 of 1 items.
    2020-06-24 11:35:00.237 WARNING: ..\..\..\..\..\src\sdksource\cloud\dzcloudtasknotifier.cpp(660): sync completed successfully, 1 items succeeded, 0 items failed.
    2020-06-24 11:35:00.237 Metadata update succeeded.
    2020-06-24 11:38:50.241 WARNING: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
    2020-06-24 11:38:50.315 WARNING: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
    2020-06-24 11:38:50.386 WARNING: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
    2020-06-24 11:38:50.418 WARNING: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
    2020-06-24 11:38:50.458 WARNING: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
    2020-06-24 11:38:50.475 WARNING: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
    2020-06-24 11:38:50.498 WARNING: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
    2020-06-24 11:38:50.616 WARNING: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout

     

    Mary

  • FishtalesFishtales Posts: 6,119

    I got the lions at the same time as the Snow Leopard.

    Leo the Lion and Friend.

    2020-06-24 18:37:55.592 Total Rendering Time: 32 minutes 9.41 seconds

    Dforce hair on left, Catalyzer hair on right.

    Click on image for full size.

  • c567591a said:

    I am having issues getting it to dforce simulate the hair. 

    I have restarted a couple times. 

    I have tried the Iray dForce version as well as the plain Snow Leopard and added the hair. 

    Error:

    2020-06-24 11:56:55.603 WARNING: ..\..\..\src\dzdynamicsengine.cpp(2691): ERROR: clCreateBuffer (-61)

    2020-06-24 11:56:55.847 Total Simulation Time: 2.99 seconds

    It does render, it just looks like someone static'ed his hair.

    Any thoughts?  

    Hello. That could happen for a number of reason (BTW, check if your nvidia drivers are updated). To fix it try this:
    - select the Snow Leopard
    - select the related surfaces
    - apply the dforce modifier hair

    See attached image for details

    At this point the simulation should run correctly.

     

    sLEo001.jpg
    2387 x 1826 - 631K
  • After two times trying to do an Iray Catlyzer render of the Snow Leopard and a UltraScenery, Daz stuck on the 4th iteration of the fur building or something. I just checked my NVidia and found a new update was released today, so it is downloading. But, can the cat and UltraScenery work together?

    Additional information: After updating the Nvidia update still didn't work. Checked the promo sheet, said I needed version 1.9, but I couldn't find any indication of that version, so opened DIM, uninstalled and reinstalled. Checked and my plug-in still shows okay in the Help menu. Reloaded the file, closed off the environment completely and just tried to render the cat. And stuck at the same place.

    'Snow Leopard: inspecting shave group #4'

    I am attaching a snip.

    I have also tried the release and the Beta version of Daz Studio 4.12. 
    Am I just impatient or am I doing something wrong?

    Mary

     

    Running in "Safe Mode" might indeed take a long time in case of complex scenes. Can you try disabling "Safe mode" and see if the render goes through? It should be really much faster that way.

  • MelanieLMelanieL Posts: 7,384

    Hi, Alessandro - is the "Required Products" list correct - it says you (obviously) need the Felidae by AM Lion but is the Lion dForce Add-On really necessary?

  • MelanieL said:

    Hi, Alessandro - is the "Required Products" list correct - it says you (obviously) need the Felidae by AM Lion but is the Lion dForce Add-On really necessary?

    No, just the Lion (so the Lion dForce add-on is NOT necessary). Snow Leopard (as also Kimbo and the Smilodon), they have dForce presets included.

  • MelanieLMelanieL Posts: 7,384

    Great, thank you!

  • memcneil70memcneil70 Posts: 4,115

    After two times trying to do an Iray Catlyzer render of the Snow Leopard and a UltraScenery, Daz stuck on the 4th iteration of the fur building or something. I just checked my NVidia and found a new update was released today, so it is downloading. But, can the cat and UltraScenery work together?

    Additional information: After updating the Nvidia update still didn't work. Checked the promo sheet, said I needed version 1.9, but I couldn't find any indication of that version, so opened DIM, uninstalled and reinstalled. Checked and my plug-in still shows okay in the Help menu. Reloaded the file, closed off the environment completely and just tried to render the cat. And stuck at the same place.

    'Snow Leopard: inspecting shave group #4'

    I am attaching a snip.

    I have also tried the release and the Beta version of Daz Studio 4.12. 
    Am I just impatient or am I doing something wrong?

    Mary

     

    Running in "Safe Mode" might indeed take a long time in case of complex scenes. Can you try disabling "Safe mode" and see if the render goes through? It should be really much faster that way.

    Thanks for the reply. I loaded the scene up and without 'Safe Mode' on, started the catalyzer, and Daz Studio crashed. LOL

    Mary

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    edited June 2020

    After two times trying to do an Iray Catlyzer render of the Snow Leopard and a UltraScenery, Daz stuck on the 4th iteration of the fur building or something. I just checked my NVidia and found a new update was released today, so it is downloading. But, can the cat and UltraScenery work together?

    Additional information: After updating the Nvidia update still didn't work. Checked the promo sheet, said I needed version 1.9, but I couldn't find any indication of that version, so opened DIM, uninstalled and reinstalled. Checked and my plug-in still shows okay in the Help menu. Reloaded the file, closed off the environment completely and just tried to render the cat. And stuck at the same place.

    'Snow Leopard: inspecting shave group #4'

    I am attaching a snip.

    I have also tried the release and the Beta version of Daz Studio 4.12. 
    Am I just impatient or am I doing something wrong?

    Mary

     

    Running in "Safe Mode" might indeed take a long time in case of complex scenes. Can you try disabling "Safe mode" and see if the render goes through? It should be really much faster that way.

    Thanks for the reply. I loaded the scene up and without 'Safe Mode' on, started the catalyzer, and Daz Studio crashed. LOL

    Mary

    Mmhhhh ok. Can you check if DS interface settings are like the ones attached, and eventually try again (after restarting DS). Alternatively, try using the Snow Leopard dForce version, that should work probably better in your case.

     

    DS prefs.jpg
    1188 x 1719 - 157K
    Post edited by Alessandro Mastronardi on
  • FishtalesFishtales Posts: 6,119

    @Alessandro Mastronardi

    Was it you who posted some settings a few years ago for DAZ Studio that sorted out Catalyzer crashing? It was in Studio Edit/Preferences/Interface. I used them and it stopped the crashing but I also use Safe Mode :)

  • memcneil70memcneil70 Posts: 4,115

    After two times trying to do an Iray Catlyzer render of the Snow Leopard and a UltraScenery, Daz stuck on the 4th iteration of the fur building or something. I just checked my NVidia and found a new update was released today, so it is downloading. But, can the cat and UltraScenery work together?

    Additional information: After updating the Nvidia update still didn't work. Checked the promo sheet, said I needed version 1.9, but I couldn't find any indication of that version, so opened DIM, uninstalled and reinstalled. Checked and my plug-in still shows okay in the Help menu. Reloaded the file, closed off the environment completely and just tried to render the cat. And stuck at the same place.

    'Snow Leopard: inspecting shave group #4'

    I am attaching a snip.

    I have also tried the release and the Beta version of Daz Studio 4.12. 
    Am I just impatient or am I doing something wrong?

    Mary

     

    Running in "Safe Mode" might indeed take a long time in case of complex scenes. Can you try disabling "Safe mode" and see if the render goes through? It should be really much faster that way.

    Thanks for the reply. I loaded the scene up and without 'Safe Mode' on, started the catalyzer, and Daz Studio crashed. LOL

    Mary

    Mmhhhh ok. Can you check if DS interface settings are like the ones attached, and eventually try again (after restarting DS). Alternatively, try using the Snow Leopard dForce version, that should work probably better in your case.

     

    That may do it. I had Backface Lighting in the middle (?) and Texture Resources in the middle. Moved them to match your screen shot, brought up the Beta (the catalyzer has disappeared from the release version since this morning!). After the scene loaded, made sure it was on Mitchell then put on Safe Mode, and it is currently on 'shave group # 4'. I have to leave for 15 minutes, so letting it run is fine.

    Mary

  • Fishtales said:

    @Alessandro Mastronardi

    Was it you who posted some settings a few years ago for DAZ Studio that sorted out Catalyzer crashing? It was in Studio Edit/Preferences/Interface. I used them and it stopped the crashing but I also use Safe Mode :)

    Guilty as charged...

  • After two times trying to do an Iray Catlyzer render of the Snow Leopard and a UltraScenery, Daz stuck on the 4th iteration of the fur building or something. I just checked my NVidia and found a new update was released today, so it is downloading. But, can the cat and UltraScenery work together?

    Additional information: After updating the Nvidia update still didn't work. Checked the promo sheet, said I needed version 1.9, but I couldn't find any indication of that version, so opened DIM, uninstalled and reinstalled. Checked and my plug-in still shows okay in the Help menu. Reloaded the file, closed off the environment completely and just tried to render the cat. And stuck at the same place.

    'Snow Leopard: inspecting shave group #4'

    I am attaching a snip.

    I have also tried the release and the Beta version of Daz Studio 4.12. 
    Am I just impatient or am I doing something wrong?

    Mary

     

    Running in "Safe Mode" might indeed take a long time in case of complex scenes. Can you try disabling "Safe mode" and see if the render goes through? It should be really much faster that way.

    Thanks for the reply. I loaded the scene up and without 'Safe Mode' on, started the catalyzer, and Daz Studio crashed. LOL

    Mary

    Mmhhhh ok. Can you check if DS interface settings are like the ones attached, and eventually try again (after restarting DS). Alternatively, try using the Snow Leopard dForce version, that should work probably better in your case.

     

    That may do it. I had Backface Lighting in the middle (?) and Texture Resources in the middle. Moved them to match your screen shot, brought up the Beta (the catalyzer has disappeared from the release version since this morning!). After the scene loaded, made sure it was on Mitchell then put on Safe Mode, and it is currently on 'shave group # 4'. I have to leave for 15 minutes, so letting it run is fine.

    Mary

    Ok, but hopefully it should also work with Safe Mode disabled...

  • DkgooseDkgoose Posts: 1,451

    looks amazing :) any chance of futue addons for eye colors :) and maybe a white bengal blue eyed tiger ;)

  • memcneil70memcneil70 Posts: 4,115

    Well back home, still inspecting shave group #4. 

  • memcneil70memcneil70 Posts: 4,115

    It took an hour and finally it started the render! We are cooking. Thank you so much. I will post the kitty when he is done.

  • It took an hour and finally it started the render! We are cooking. Thank you so much. I will post the kitty when he is done.

    That's already something, curious to see the render...

  • memcneil70memcneil70 Posts: 4,115
    edited June 2020

    Final render!

    Strayed into the Woods.

    Thank you so much Allesandro, for your help and the wonderful cat.

    Mary

    Strayed into the Woods.png
    1600 x 2071 - 6M
    Post edited by memcneil70 on
  • gitika1gitika1 Posts: 948

    The Lion and Add-ons still remain in separate folder trees.

    The lion is in Animals/AM/Felidae

    The add-ons are in Animals/AM/Felidae by AM

    so they are not nested together.  I put in a ticket quite awhile ago, but no update has come through.

  • DaventakiDaventaki Posts: 1,624
    c567591a said:

    I am having issues getting it to dforce simulate the hair. 

    I have restarted a couple times. 

    I have tried the Iray dForce version as well as the plain Snow Leopard and added the hair. 

    Error:

    2020-06-24 11:56:55.603 WARNING: ..\..\..\src\dzdynamicsengine.cpp(2691): ERROR: clCreateBuffer (-61)

    2020-06-24 11:56:55.847 Total Simulation Time: 2.99 seconds

    It does render, it just looks like someone static'ed his hair.

    Any thoughts?  

    Hello. That could happen for a number of reason (BTW, check if your nvidia drivers are updated). To fix it try this:
    - select the Snow Leopard
    - select the related surfaces
    - apply the dforce modifier hair

    See attached image for details

    At this point the simulation should run correctly.

     

    Mines giving the same error.  Drivers up to date, I tried in both the beta and current release.  I do not have the dforce modifier hair!?

  • gitika1gitika1 Posts: 948

    Never had DS crash with dforce hair before.  I am not able to use the Snow Leopard. (Only tried using the basic HDRI that DS loads with)  Tried three times and DS closed down each time. 

     

    Here are the lines from the last attempt.

    2020-06-24 21:06:49.731 Iray [INFO] - SCENE:IO ::   1.0   SCENE  io   info : Loading module "::daz_3d::dual_lobe_hair" from "C:\Program Files\DAZ 3D\DAZStudio4\shaders\iray\daz_3d\dual_lobe_hair.mdl".

    2020-06-24 21:06:49.958 File loaded in 0 min 0.9 sec.

    2020-06-24 21:06:49.960 Loaded file: Snow Leopard - Wearable Preset.duf

    2020-06-24 21:06:50.031 Loaded Morph Deltas in 0 min 0.0 sec.

    2020-06-24 21:06:50.031 Loaded file: Snow Leopard.dsf

    2020-06-24 21:06:50.371 Loaded image SnowLeopard-Body-C1.jpg

    2020-06-24 21:06:50.938 File loaded in 0 min 4.8 sec.

    2020-06-24 21:06:50.938 Loaded file: Snow Leopard - Iray dForce.duf

    2020-06-24 21:06:51.363 Loaded image Lion-Parts-D.jpg

    2020-06-24 21:06:51.599 Loaded image SnowLeopard-Body-D.jpg

    2020-06-24 21:06:51.767 Loaded image SnowLeopard-Eyes-D.jpg

    2020-06-24 21:08:08.876 Loaded image SnowLeopard-Body-C1.jpg

    2020-06-24 21:08:08.886 Loaded image SnowLeopard-Body-C1.jpg

    2020-06-24 21:08:09.465 Loaded image SnowLeopard-Body-Density-1.jpg

    2020-06-24 21:08:37.438 Loaded image SnowLeopard-Body-Density-1.jpg

    2020-06-24 21:08:47.590 Loaded image SnowLeopard-Body-Density-1.jpg

    2020-06-24 21:08:48.255 Loaded image SnowLeopard-Body-Density-1.jpg

    2020-06-24 21:11:04.169 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae\Lion-Body-A.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.243 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae\Lion-Body-R.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.245 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae by AM\SnowLeopard-Body-D.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.324 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae\Lion-Parts-W.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.391 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae\Lion-Parts-R.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.489 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae\Lion-Parts-D.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.551 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae\Lion-Parts-B.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.610 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae\Lion-Parts-G.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.618 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae by AM\SnowLeopard-Eyes-D.jpg", pixel type "Rgb", 4096x4096x1 pixels, 1 miplevel.

    2020-06-24 21:11:04.619 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae\Lion-Eyes-N.jpg", pixel type "Rgb", 2048x2048x1 pixels, 1 miplevel.

    2020-06-24 21:11:31.779 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\AM\Felidae by AM\SnowLeopard-Body-F.jpg", pixel type "Rgb", 2048x2048x1 pixels, 1 miplevel.

    2020-06-24 21:12:03.651 Iray [INFO] - IMAGE:IO ::   1.0   IMAGE  io   info : Loading image "E:\Daz 3D Content\Runtime\Textures\Orestes\SkyHdris-SunnyClouds\sunnysky01c-435.hdr", pixel type "Rgb_fp", 8192x4096x1 pixels, 1 miplevel.

    2020-06-24 21:13:41.440 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating geometry.

    2020-06-24 21:13:41.444 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Importing scene graph.

    2020-06-24 21:13:41.445 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Importing geometry for motion time 0

    2020-06-24 21:14:27.716 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Geometry import (6 objects with 161m triangles, 6 instances yielding 161m triangles) took 46.202s

    2020-06-24 21:14:27.805 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating materials.

    2020-06-24 21:14:29.322 Iray [INFO] - MATCNV:RENDER ::   1.0   MATCNV rend info : Material instance 'DS_Snow Leopard__bigCat_UpperTeeth_f82_13454' uses MDL JIT compilation.

    2020-06-24 21:14:29.380 Iray [INFO] - MATCNV:RENDER ::   1.0   MATCNV rend info : Material instance 'DS_Snow Leopard__bigCat_LowerTeeth_f83_13472' uses MDL JIT compilation.

    2020-06-24 21:14:29.606 Iray [INFO] - MATCNV:RENDER ::   1.0   MATCNV rend info : Material instance 'DS_Figure: Snow Leopard_guideHairs_SG0__bigCat_Skin_12a0_13559' uses MDL JIT compilation.

    2020-06-24 21:14:29.634 Iray [INFO] - MATCNV:RENDER ::   1.0   MATCNV rend info : Material instance 'DS_Figure: Snow Leopard_guideHairs_SG1__default_12c4_13605' uses MDL JIT compilation.

    2020-06-24 21:14:29.680 Iray [INFO] - MATCNV:RENDER ::   1.0   MATCNV rend info : Material instance 'DS_Figure: Snow Leopard_guideHairs_SG2__default_12e8_13651' uses MDL JIT compilation.

    2020-06-24 21:14:29.681 Iray [INFO] - MATCNV:RENDER ::   1.0   MATCNV rend info : Material instance 'DS_Figure: Snow Leopard_guideHairs_SG3__default_130c_13697' uses MDL JIT compilation.

    2020-06-24 21:14:29.735 Iray [INFO] - MATCNV:RENDER ::   1.0   MATCNV rend info : found 70 textures, 22 lambdas (7 unique)

    2020-06-24 21:14:29.969 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Emitter geometry import (1 light source with 2 triangles, 1 instance) took 0.000s

    2020-06-24 21:14:29.970 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating environment.

    2020-06-24 21:14:32.190 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating backplate.

    2020-06-24 21:14:32.191 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating lens.

    2020-06-24 21:14:32.191 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating lights.

    2020-06-24 21:14:32.192 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating object flags.

    2020-06-24 21:14:32.193 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating caustic portals.

    2020-06-24 21:14:32.193 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Updating decals.

    2020-06-24 21:14:32.197 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(305): Iray [WARNING] - IRAY:RENDER ::   1.0   IRAY   rend warn : The 'iray_optix_prime' scene option is no longer supported.

    2020-06-24 21:14:32.264 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Allocating 1-layer frame buffer

    2020-06-24 21:14:32.270 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Using interactive scheduling, caustic sampler disabled

    2020-06-24 21:14:32.271 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Initializing local rendering.

    2020-06-24 21:14:32.351 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Rendering with 1 device(s):

    2020-06-24 21:14:32.351 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : CUDA device 0 (GeForce GTX 1080 Ti)

    2020-06-24 21:14:32.352 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Rendering...

    2020-06-24 21:14:32.662 Iray [VERBOSE] - IRAY:RENDER ::   1.6   IRAY   rend progr: CUDA device 0 (GeForce GTX 1080 Ti): Processing scene...

    2020-06-24 21:14:38.810 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(305): Iray [ERROR] - IRAY:RENDER ::   1.11  IRAY   rend error: Unable to allocate 579429216 bytes from 2584199987 bytes of available device memory

    2020-06-24 21:14:38.907 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(305): Iray [ERROR] - IRAY:RENDER ::   1.6   IRAY   rend error: CUDA device 0 (GeForce GTX 1080 Ti): Scene setup failed

    2020-06-24 21:14:38.915 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(305): Iray [ERROR] - IRAY:RENDER ::   1.6   IRAY   rend error: CUDA device 0 (GeForce GTX 1080 Ti): Device failed while rendering

    2020-06-24 21:14:38.920 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(305): Iray [WARNING] - IRAY:RENDER ::   1.6   IRAY   rend warn : All available GPUs failed.

    2020-06-24 21:14:38.924 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(305): Iray [WARNING] - IRAY:RENDER ::   1.6   IRAY   rend warn : No devices activated. Enabling CPU fallback.

    2020-06-24 21:14:38.938 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(305): Iray [WARNING] - IRAY:RENDER ::   1.6   IRAY   rend warn : Re-rendering iteration because of device failure

    2020-06-24 21:14:38.940 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(305): Iray [ERROR] - IRAY:RENDER ::   1.6   IRAY   rend error: All workers failed: aborting render

    2020-06-24 21:14:38.942 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : CPU: using 12 cores for rendering

    2020-06-24 21:14:38.942 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Rendering with 1 device(s):

    2020-06-24 21:14:38.942 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : CPU

    2020-06-24 21:14:38.943 Iray [INFO] - IRAY:RENDER ::   1.0   IRAY   rend info : Rendering...

  • DaventakiDaventaki Posts: 1,624

    gitika1 how much ram do you have? When I first picked up the Simlodon mine was doing that with the dforce hair.  I could run the catalyer hair at density 3 only.

Sign In or Register to comment.