Mec4D After Gym Set, any extra morphs?

MistaraMistara Posts: 38,675
edited December 1969 in The Commons

Mec4D After Gym Set for Genesis 2 Male(s)?

like pull up the front of the shirt, tugs, that sort of thing?

thanks :)

Comments

  • Muon QuarkMuon Quark Posts: 562
    edited July 2014

    Did you look in the DAZ store? :blank:

    Post edited by Muon Quark on
  • JOdelJOdel Posts: 6,286
    edited December 1969

    Is this the same set that's on MEC4D's own site?

  • 3Ddreamer3Ddreamer Posts: 1,300
    edited December 1969

    I think (hope) so as I picked it up on Mec4D months ago and it isn't on there now - I checked yesterday to compare them. I'm not on my 3D laptop just now to check the morphs, will try later.

  • BeeMKayBeeMKay Posts: 7,019
    edited July 2014

    There are no morphs in the gym set.

    Tank_Top.JPG
    710 x 264 - 32K
    Pants.JPG
    710 x 258 - 34K
    Post edited by BeeMKay on
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Yea, I compared to what I saw in the store with what I have installed (from when I bought it direct from Cath) and they appear to be the same sets. Also noticed all her clothing for M6 - Genesis 02 Male, are gone from her store so I think she's moved it here and we will see them get re-released here.

  • FusionLAFusionLA Posts: 249
    edited December 1969

    RAMWolff said:
    Yea, I compared to what I saw in the store with what I have installed (from when I bought it direct from Cath) and they appear to be the same sets. Also noticed all her clothing for M6 - Genesis 02 Male, are gone from her store so I think she's moved it here and we will see them get re-released here.

    I noticed the same.
    I was almost temped to buy again, since I bought all of her M6 Genesis 2 male clothing.

    Would have waited if I knew it was going to end up on DAZ just to have them in the DIM (growing to like it a lot for installs, reinstalls and update checks).
    But she does a great job on her work!, so I bought it as soon as I seen it on her site.

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    I've known Cath for about 10 years now... I greatly admire her skin packs but when she got into clothing making she blew my mind again. She is the queen of ZBrush for the DS/Poser communtiy bar none!

  • 3Ddreamer3Ddreamer Posts: 1,300
    edited December 1969

    I see her Weightlifting and Wrestler set today - I picked up Weightlifting along with the Gym set on her site, now I am on the fence about the Wrestler, I didn't think I'd use it before but... :-)

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    I have both of those as well. I did pick up Sickles new set of man shorts. Nice selection (4 types with lots of color variations)....

  • MistaraMistara Posts: 38,675
    edited December 1969

    i went for the wrestling outfit. :cheese: and the bathing trunks.


    hoping to add a couple tug morphs to the wrestling outfit.

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    @ Misty Whisky .. no there are no additional morphs since I had only M6 in March when I made it .. but it works on most all shapes even Gianni .. If you need any special let me know I can make for you guys some free update here in the forum

    @Richard, I moved only 3 sport items I made in March to my DAZ catalog .. for that reason I did not change the main covers so you guys recognize :) so that's all you will see moved for M6

    Cath

  • MistaraMistara Posts: 38,675
    edited December 1969

    Mec4D said:
    @ Misty Whisky .. no there are no additional morphs since I had only M6 in March when I made it .. but it works on most all shapes even Gianni .. If you need any special let me know I can make for you guys some free update here in the forum

    @Richard, I moved only 3 sport items I made in March to my DAZ catalog .. for that reason I did not change the main covers so you guys recognize :) so that's all you will see moved for M6

    Cath


    kewl :)

    any morphs dishabille are nice feature

    Thanks :)

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    No problem I will make couple extra stuff tonight and post a link to download

    Mec4D said:
    @ Misty Whisky .. no there are no additional morphs since I had only M6 in March when I made it .. but it works on most all shapes even Gianni .. If you need any special let me know I can make for you guys some free update here in the forum

    @Richard, I moved only 3 sport items I made in March to my DAZ catalog .. for that reason I did not change the main covers so you guys recognize :) so that's all you will see moved for M6

    Cath


    kewl :)

    any morphs dishabille are nice feature

    Thanks :)

  • 3Ddreamer3Ddreamer Posts: 1,300
    edited December 1969

    Yeah it does look great on Gianni :-)

    beach_party.png
    488 x 623 - 515K
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Yes indeed and I did not had Gianni when I made it ..I like the Sickles new set also .. good job

    3Ddreamer said:
    Yeah it does look great on Gianni :-)
  • FusionLAFusionLA Posts: 249
    edited December 1969

    Mec4D said:
    No problem I will make couple extra stuff tonight and post a link to download

    Mec4D said:
    @ Misty Whisky .. no there are no additional morphs since I had only M6 in March when I made it .. but it works on most all shapes even Gianni .. If you need any special let me know I can make for you guys some free update here in the forum

    @Richard, I moved only 3 sport items I made in March to my DAZ catalog .. for that reason I did not change the main covers so you guys recognize :) so that's all you will see moved for M6

    Cath


    kewl :)

    any morphs dishabille are nice feature

    Thanks :)

    Even though I bought all three M6 clothes from your site, I went ahead and re-purchased all three from DAZ.
    I Like having them in DIM to install and also wanted to support you.

    The quality of your work I have seen, has been outstanding!
    When I sent you a message about the morphs a month ago, you were helpful with getting me started in Zbrush for morphs.
    Glad to see you are going to do some morphs.

    Are you going to update the products with the morphs or will they always need to be installed separately?

    For the M6 Wrestler Suit, the DZ singlet X is a good example of morphs.

    Siglet_morphs_example.jpg
    806 x 805 - 86K
  • MistaraMistara Posts: 38,675
    edited December 1969

    fusionla said:
    Mec4D said:
    No problem I will make couple extra stuff tonight and post a link to download

    Mec4D said:
    @ Misty Whisky .. no there are no additional morphs since I had only M6 in March when I made it .. but it works on most all shapes even Gianni .. If you need any special let me know I can make for you guys some free update here in the forum

    @Richard, I moved only 3 sport items I made in March to my DAZ catalog .. for that reason I did not change the main covers so you guys recognize :) so that's all you will see moved for M6

    Cath


    kewl :)

    any morphs dishabille are nice feature

    Thanks :)

    Even though I bought all three M6 clothes from your site, I went ahead and re-purchased all three from DAZ.
    I Like having them in DIM to install and also wanted to support you.

    The quality of your work I have seen, has been outstanding!
    When I sent you a message about the morphs a month ago, you were helpful with getting me started in Zbrush for morphs.
    Glad to see you are going to do some morphs.

    Are you going to update the products with the morphs or will they always need to be installed separately?

    For the M6 Wrestler Suit, the DZ singlet X is a good example of morphs.

    heheh. those morphs tell a story :cheese:

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks fusionla for the support ..
    the morphs are nice but they can be used just in the standing pose as when you bend in any direction with the torso it does not looks the same due to weight maps .
    Beside I was talking about the After Gym pack morphs .. I was out by dentist yesterday so was really not in mood for computer after .. but I will working on that tonight .

    The morphs will be just in data folder easy to put into your My Library .. so you don't have to install all the product again
    I will post link to the files here in this forum.. I am not going to put it into my store as the add-on as it can't be free and it take to long :)

    @Misty Whisky .. yeah indeed "giggle "

    fusionla said:
    Mec4D said:
    No problem I will make couple extra stuff tonight and post a link to download

    Mec4D said:
    @ Misty Whisky .. no there are no additional morphs since I had only M6 in March when I made it .. but it works on most all shapes even Gianni .. If you need any special let me know I can make for you guys some free update here in the forum

    @Richard, I moved only 3 sport items I made in March to my DAZ catalog .. for that reason I did not change the main covers so you guys recognize :) so that's all you will see moved for M6

    Cath


    kewl :)

    any morphs dishabille are nice feature

    Thanks :)

    Even though I bought all three M6 clothes from your site, I went ahead and re-purchased all three from DAZ.
    I Like having them in DIM to install and also wanted to support you.

    The quality of your work I have seen, has been outstanding!
    When I sent you a message about the morphs a month ago, you were helpful with getting me started in Zbrush for morphs.
    Glad to see you are going to do some morphs.

    Are you going to update the products with the morphs or will they always need to be installed separately?

    For the M6 Wrestler Suit, the DZ singlet X is a good example of morphs.

  • KeryaKerya Posts: 10,943
    edited December 1969

    Uuuh ... dentists.
    Sometimes you need them, but needing them isn't fun!
    *sending healing thoughts*

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    I was eating sea and bite on a fragment of a mussel shell and one of my tooth got little mobile and very sensitive
    but it may fix itself with time, I just checked just in case ..

    Kerya said:
    Uuuh ... dentists.
    Sometimes you need them, but needing them isn't fun!
    *sending healing thoughts*

    btw I tried yesterday the crazy morphs .. but they don't want to work fine in Poser via DSON on different shapes since Poser don;t have smooth modifier so I am experiencing poke with Giani and other shapes beside M6 ..
    so I will have to make separate morphs for different shapes .. I need little more time

  • MistaraMistara Posts: 38,675
    edited December 1969

    makes a lot of extra work?
    if anyone's polling, i'm not using dson in poser.

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    If only for DS then would be not much extra work , id you do more advanced stuff DSON in Poser can be really a pain
    and I don;t want to spend another week trying stuff out .. so let me do the stuff for DS first and maybe I came with some ideas on the way for Poser users ..

    makes a lot of extra work?
    if anyone's polling, i'm not using dson in poser.
Sign In or Register to comment.