Carrara Challenge #66 - Jumping Off a Browser Scene Go Splat !

HeadwaxHeadwax Posts: 9,969
edited June 2023 in Carrara Discussion

Carrara Challenge # 66 - Jumping Off a Browser Scene Go Splat -  Entry Deadline May 31st

Entry Thread here: Carrara Challenge #66 - Jumping Off a Browser Scene Go Splat - Entry Thread -Ends May 31st - Daz 3D Forums

lava lamp

 

The creators of Carrara obviously loved Carrara.

One of the legacies they left us with was a whole bunch of complimentary "scenes' in our browser (the above image is from Lava Lamp scene)

They were left there by the Carrara Gods to give is ideas how to use the program - as 'jumping off points."

 

Also, if you have supported Carrara artists in the past, you may find your browser SCENE SECTION full of their work also.

A superb example is DARTANBECK'S WORK -  which is/are currently free for download at his site.  Also see here.

My scene browser also has excellent work by TangoAlpha and PhilW - amongst others (see below image)

 

Example Scene Browser

 

 

Your challenge is to create an image, or one page of sequential images, or an animation inspired by any scene(s) in your browser.

NOTE: ANY SCENE is illegable, including purchased scenes that are in your SCENE BROWSER.

 

SPLATS - AN UNLOVED PART OF CARRARA

 

If you manage to use a "SPLAT" in your work you get a GOLD STAR. 

 

 Minimum Requirements

--- Use Carrara's render engine or a related plugin like Octane, Lux, etc.

--- Postwork is welcome.  Please post the original unpostworked render in the challenge work-in-progress (WIP) thread.  Discussion encouraged.

--- WIP Thread participation.  Post at least one work in progress to this thread offering some insight to your creative process.  Examples include post-work or a scene setup or a discussion of a technique you used.

 Prizes (if any)

--- To be announced.  Intent will be to have a separate category for top stills (single image/page) and top animation, but be normal other than that. 

 Entries

--- Up to 6 entries per artist.  An animation or a single page of sequential comic panels counts as one entry.

--- There are two categories of entries: stills and animations.  A single page of sequential comic panels counts as one still.

 Animations (NOT, Not, not required)

--- Animations must include credits for such as should be credited, such as music, etc 
--- At least two artists must submit an animation for the animation category to be active.  Otherwise, the animation counts as a still image.

--- Animations should try to be less than 3 minutes long, including credits, unless it makes sense to go longer, then do so.  Or as short as you want.

 

 Dates

TBA

THANKS TO DIOMEDE, WHOSE WORDS I HAVE LIFTED FROM THE LAST CHALLENGE

ENTRY THREAD HERE Carrara Challenge #66 - Jumping Off a Browser Scene Go Splat - Entry Thread -Ends May 31st - Daz 3D Forums

lavalamp.jpg
667 x 900 - 31K
DartLavaSceneUnderwaterRealms.jpg
1280 x 720 - 106K
Doc2.jpg
800 x 600 - 226K
Doc3.jpg
800 x 600 - 31K
Doc4.jpg
800 x 600 - 104K
Doc5.jpg
800 x 600 - 21K
Doc7.jpg
2100 x 1182 - 190K
Doc9.jpg
640 x 480 - 57K
log1.jpg
800 x 600 - 191K
RandomBrowser.jpg
640 x 1016 - 404K
TREESANDSHRUBS9.png
1867 x 1400 - 3M
treecoloure.png
649 x 716 - 2M
TREESSHRUBSFROMABOVE.png
1867 x 1400 - 5M
threesplats.jpg
3409 x 1669 - 1M
Post edited by Headwax on
«13456712

Comments

  • HeadwaxHeadwax Posts: 9,969
    edited April 2023

    EXAMPLES OF BROWSER SCENES

     

    Dart's Lava Scene from one of his free sets.

     

    Random Scenes Included in Carrara Browser

     

     

     

     

     

     

     

     

     

    SPLATS

     

    If you are wondering about 'splats' - basically a splat is a plane that always faces the rendering camera (they do occasionally have rendering artifacts.)

    The Carrara manual suggests using them to populate forests with reduced polygon overhead.

    So, with that in mind, I remdered this tree in Carrara - it's the colour channel render and comes with it's own alpha.

     

    In a new scene, I placed a plane and a splat . INSERT>SPLAT.

    I replicated the splat on the plane.

    Then I dropped in the above image onto the COLOUR part of the splat texture (in the shader room).

    This is the view from afar of the replicated splats.

     

     

    This is the view from above (I used this as the shader for my plane)

     

    And as an exersize, I covered M4 with splats, made him invisable, and played with the splat textures - failing at making him look like he was covered in feathers (middle section of below image)

    .

     

     

     

    Post edited by Headwax on
  • UnifiedBrainUnifiedBrain Posts: 3,588

    Glad you are back!  Thanks for starting us off.

    I need to populate my scene tab.  It is woefully small.  Several great products that I have never opened.  frown

  • HeadwaxHeadwax Posts: 9,969
    edited April 2023

    Thanks UB, been living in  a caravan 300 metres from a deserted beach, 6 weeks surf, only missed 4 days and one of them because a shark hanging around in the shallows - so went paddleboarding to keep safe .

    Feel twenty years younger and lost eight kilos.

    Now back in the dream world ....

    Post edited by Headwax on
  • HeadwaxHeadwax Posts: 9,969
    edited April 2023

    Here some work with the lava lamp, the low res chaps are splats replicated - of course I could have replicated the meshes 

    the Earth is a separate render from The SPACE scene folder

    The Lava lamp is in the special effects Folder 

    Post worked and No Post worked images

    The stars ar from a free online starfield generator (space scape)

    The light at the apex of the lava lamp has a standard lend flare added

     

     

    original pre post

     

     

     

     

    Lorenzo.png
    630 x 1088 - 3M
    lava_lampwip.jpg
    4255 x 5342 - 379K
    lava_lamp.jpg
    4255 x 5342 - 2M
    lava_lampGrunge.jpg
    4255 x 5342 - 2M
    Post edited by Headwax on
  • HeadwaxHeadwax Posts: 9,969
    edited April 2023

    Working with the Cornet HDR in Global Illumination in the Scenes Browser

    Pre and Post 

    I used the Global Illumination Pass to get rid of the unwanted band of fog, then used an obj pass to isiolate the reflectibve elements of the original PNG and bring them back - as reflection don't come out in the Global Iluminatoion pass

     

     

    Cornet-HDRI-BandW.jpg
    3068 x 4000 - 724K
    Cornet-HDRI-wipB.jpg
    3068 x 4000 - 584K
    Post edited by Headwax on
  • Bunyip02Bunyip02 Posts: 8,422
    edited April 2023

    UnifiedBrain said:

    Glad you are back!  Thanks for starting us off.

    I need to populate my scene tab.  It is woefully small.  Several great products that I have never opened.  frown

    Great start Headwax !!!

    UB - better get started with that population !!!

    Carrara Scene Properties 1.png
    902 x 958 - 102K
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,422

    Headwax said:

    Here some work with the lava lamp, the low res chaps are splats replicated - of course I could have replicated the meshes 

    the Earth is a separate render from The SPACE scene folder

    The Lava lamp is in the special effects Folder 

    Post worked and No Post worked images

    The stars ar from a free online starfield generator (space scape)

    The light at the apex of the lava lamp has a standard lend flare added

     

     

    original pre post

    Like this one very much !!!

  • Bunyip02Bunyip02 Posts: 8,422
    edited April 2023

    Alien Plants Scene - WIP 1

    In my Misc section of my Scene Tab I have saved a number of Bryce terrains, imported into Carrara as obj's.

    Aim for this entry is to use Splats to create an Alien Forest - not as good as a Howie scene but hopefully not too shaby.

    Used that Carrara Plugin they have to give away for free to make the vegetation textures for the Splats.

    Scene setup with Terrain

    CC66 Alien Plants WIP-1.png
    3366 x 1028 - 1011K
    CC66 Alien Plants WIP-2.png
    2268 x 1028 - 3M
    Bryce Terrains Carrara 1.png
    1903 x 1020 - 840K
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,422
    edited April 2023

    Alien Plants Scene - WIP 2

    Spaceship added from Misc Scenes files - might finish off the forest next.

    CC66 Alien Plants WIP-3.png
    3840 x 1033 - 3M
    Post edited by Bunyip02 on
  • DiomedeDiomede Posts: 15,133

    This should be a fun one.  I am sure I have forgotten much of what I learned by exploring those old scenes.  Way to start us off, Bunyip. Bryce in the scene tab. Very cool and very clever.  yes

  • ed3Ded3D Posts: 2,142

    ~   alrite then   ~    if one can make the Scene  _   "giggl , giggl "

  • UnifiedBrainUnifiedBrain Posts: 3,588

    Headwax said:

    Here some work with the lava lamp, the low res chaps are splats replicated - of course I could have replicated the meshes 

    the Earth is a separate render from The SPACE scene folder

    The Lava lamp is in the special effects Folder 

    Post worked and No Post worked images

    The stars ar from a free online starfield generator (space scape)

    The light at the apex of the lava lamp has a standard lend flare added

     

    A big wow.  Terrific esthetics/taste in the use of noise in post.

    50's pulp fans are rejoicing. :)

  • HeadwaxHeadwax Posts: 9,969

    thanks UB et Bunyip02, always fun thinking tangentally - even if I can't spell it :)

    Great start @Bunyip02 I like how you are thinking with that Plugin,

    @UnifiedBrain wonderful reason for installing stuff :) Yes I too am guilty of being a serial non-installer!

    @Diomede too true! yes I never really properly explored them. the already rigged character with the IK in animation section is interesting. In the olden days there used to be a French Carrara forum and a series of tuts based on the same character I think

    @ed3D Greta Carbo and Madonna come to mind with that expression.

     

    Thanks all  for participating:) - sorry to have been away for so long 

     

    Untitled-1.jpg
    1412 x 1193 - 93K
  • StezzaStezza Posts: 8,006

    I'm gonna have to think about my splats for this one!

    great challenge yes

  • Bunyip02Bunyip02 Posts: 8,422
    edited April 2023

    Alien Plants Scene - Render

    CC66 Alien Plants 1B.png
    1600 x 1200 - 3M
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,422
    edited April 2023

    Moon Explorer - Inspired by the Apollo Moon Landing Scene, but with a Toon flavour.

    Splat used for Plasma effect.

    Scene setup

    Raw Render

    Postwork - Topaz Adjust - Crisp filter used to bring out details

    Postwork - Topaz Adjust - Color Blast filter used to bring out colours

    Postwork - Filter Forge - Chinaware painting filter used to obtain NPR effect

    Final image

    CC66 Moon Explorer WIP-1.png
    3823 x 1030 - 3M
    CC66 Moon Explorer -1.png
    1280 x 960 - 2M
    CC66 Moon Explorer WIP-2.png
    1918 x 1038 - 1M
    CC66 Moon Explorer WIP-3.png
    1913 x 1033 - 1M
    CC66 Moon Explorer WIP-4.png
    1525 x 1026 - 2M
    CC66 Moon Explorer -1 Tpz FltFrg.png
    1280 x 960 - 3M
    Post edited by Bunyip02 on
  • HeadwaxHeadwax Posts: 9,969

    Stezza said:

    I'm gonna have to think about my splats for this one!

    great challenge yes

    thanks @Stezza, yes a splat is a splat even when it isn't :)

  • HeadwaxHeadwax Posts: 9,969

    Bunyip02 said:

    Alien Plants Scene - Render

     

    that's superb Bunyip02 , love how they are 2d but almost poke you in the eye !

  • HeadwaxHeadwax Posts: 9,969

    Bunyip02 said:

    Moon Explorer - Inspired by the Apollo Moon Landing Scene, but with a Toon flavour.

    Splat used for Plasma effect.

     

    Scene setup

     

    Raw Render

     

    Postwork - Topaz Adjust - Crisp filter used to bring out details

    Postwork - Topaz Adjust - Color Blast filter used to bring out colours

     

    Postwork - Filter Forge - Chinaware painting filter used to obtain NPR effect

     

    great effect and excellent choice of splat :) Thanks for he heads up on the process~!

    Final image

  • Bunyip02Bunyip02 Posts: 8,422

    Headwax said:

    Bunyip02 said:

    Alien Plants Scene - Render

     

    that's superb Bunyip02 , love how they are 2d but almost poke you in the eye !

    Thanks !!!

  • Bunyip02Bunyip02 Posts: 8,422

    Headwax said:

    Bunyip02 said:

    Moon Explorer - Inspired by the Apollo Moon Landing Scene, but with a Toon flavour.

    Splat used for Plasma effect.

     

    Scene setup

     

    Raw Render

     

    Postwork - Topaz Adjust - Crisp filter used to bring out details

    Postwork - Topaz Adjust - Color Blast filter used to bring out colours

     

    Postwork - Filter Forge - Chinaware painting filter used to obtain NPR effect

     

    great effect and excellent choice of splat :) Thanks for he heads up on the process~!

    Final image

    Thanks !!!

  • Bunyip02Bunyip02 Posts: 8,422
    edited April 2023

    Added Stezza's Thingee peeking out of a Moon crater.

    CC66 Moon Explorer 1b Tpz FltFrg.png
    1280 x 960 - 3M
    Post edited by Bunyip02 on
  • UnifiedBrainUnifiedBrain Posts: 3,588

    I feel a need to ask for some clarity here.

    The constraint of this Challenge is that it must include something from the Carrara Scene tab.  In that tab, there are several different categories of items - skies, lights, terrains, and even Carrara objects, to name a few.  However, the one thing they all have in common is that they were made for Carrara.

    So my conclusion is that the "spirit of the constraint," as indicated by Headwax in the original post, is to use either native content or scenes/objects specifically made for Carrara. 

    If we instead can load virtually anything into the Scene tab - and that is certainly possible - then virtually anything can be used in our renders.  It is just like saying "Use anything you want, but just make sure that you turn it into a Carrara file and load it into the Scene tab first."

    Maybe its just me, but that is not much of a constraint. :)  It is more like a bookkeeping trick.

    I await further clarification.

     

  • Bunyip02Bunyip02 Posts: 8,422

    Hello UB - there's plenty of scope to load up your Carrara browser with goodies, have been doing just that since I loaded Carrara onto my computers ( onto my second computer with Carrara now. )

    It makes full use of Carrara as a render hub. If I wanted to load DAZ Studio up with scenes then I would just use DAZ Studio. Have fun and use Carrara to it's maximum !!!

  • Bunyip02Bunyip02 Posts: 8,422
    edited April 2023

    Monster Cave Goblin - better run he's out hunting for meat !

    Inspiration for this scene is the plants of Carrara. Used the Basic Plants & items from various scenes by Howie Farkes.

    Scene setup

    Raw render

    Postwork

    Final image

     

    CC66 Monster Cave Goblin WIP -1.png
    3833 x 1033 - 1M
    CC66 Monster Cave Goblin -1.png
    1600 x 1200 - 4M
    CC66 Monster Cave Goblin WIP -2.png
    1916 x 1040 - 1M
    CC66 Monster Cave Goblin -1 Tpz.png
    1600 x 1200 - 4M
    Post edited by Bunyip02 on
  • HeadwaxHeadwax Posts: 9,969
    edited April 2023

    UnifiedBrain said:

    I feel a need to ask for some clarity here.

    The constraint of this Challenge is that it must include something from the Carrara Scene tab.  In that tab, there are several different categories of items - skies, lights, terrains, and even Carrara objects, to name a few.  However, the one thing they all have in common is that they were made for Carrara.

    So my conclusion is that the "spirit of the constraint," as indicated by Headwax in the original post, is to use either native content or scenes/objects specifically made for Carrara. 

    If we instead can load virtually anything into the Scene tab - and that is certainly possible - then virtually anything can be used in our renders.  It is just like saying "Use anything you want, but just make sure that you turn it into a Carrara file and load it into the Scene tab first."

    Maybe its just me, but that is not much of a constraint. :)  It is more like a bookkeeping trick.

    I await further clarification.

     

    Hello UB. yes that is a good question.

    Of course a challenge with no constraints is the most diificult challenge at all.

    For me, I am happy to leave it to the artist's choice.

    These challenges for me are about a few things.

    One is encouraging people to use Carrara.

    Another is learning how others use Carrara.

    Another is challenging myself to become a better Carrara user artist.

    In starting this challenge I saw that there were many things in my Scenes Browser that I had ignored because there were more shiny things elsewhere to be used/bought/ downloaded.

    For example, in my 20 Million Gigabyte DAZ Library of aquistions   I have some great mediterranean town kits. I also have cities and landscapes enire planets, solar systems, galaxies and etc..., 

    But when I looked in My SCene Browser I find, amongst the Native Scenes, other things automatically installed eg :  mystic gorge, PhilW's Night and Day City, Hemlock Folly, etc. Hapsburg.

    So I decided the challenge should be about what is in our Scene Browser.

    If an artists wants to add their Gigabytian  DAZ Aquisitions to the scene Browser I am happy with that . It's an artist's choice to use every tool at hand.

    Or they can, metaphorically,  go out into the countryside, dig up some coloured dirt siennas and ochres, mix it with their blood and oily sap from a tree and paint a masterpiece like The Lascaux Caves - if they feel that is what they need to complete their artistic expression.

    So yes, in answer to your question, the constraints are set by the individual artist - and that kind of constraint is the most difficult of all !

     

    Post edited by Headwax on
  • HeadwaxHeadwax Posts: 9,969

    Bunyip02 said:

    Monster Cave Goblin - better run he's out hunting for meat !

    Inspiration for this scene is the plants of Carrara. Used the Basic Plants & items from various scenes by Howie Farkes.

    Scene setup

    Raw render

    Postwork

    Final image

     

    Hello Bunyip02, some more eggscellent work (Happy Easter!)  For thise one, a small critique would be to render the plants/grass from above and use that generated texture on your landcape - it would make the whole scene more organcially wholistic c so to speak :) sorry about the typos - my keyboard Surface Pro likes to insert typing where ever it likes ...

  • UnifiedBrainUnifiedBrain Posts: 3,588

    Headwax, if you want to host a Challenge without any specific external technical or motivational constraint, why not just say it. :)

    Why not just say "anything goes?"  Because that is what you are proposing.  There is no "challenge" to putting assets in the Carrara scene tab.

    I am not opposed to "anything goes," although I don't see where it is ultimately any different from making a render and posting it in the Community Art Gallery thread, or any other thread.

    So yes, in answer to your question, the constraints are set by the individual artist - and that kind of constraint is the most difficult of all !

    No offense, but that doesn't mean anything to me unless you define "constraint."  I set my own constraints all the time.  On occasion, it's kind of fun to adhere to constraints set by others.  That is a big reason why I keep participating in the Challenge.

    Whatever.  I will participate by following your original suggestion, and base my renders on native content from the scene tab.

  • HeadwaxHeadwax Posts: 9,969

    UnifiedBrain said:

    Headwax, if you want to host a Challenge without any specific external technical or motivational constraint, why not just say it. :)

    Why not just say "anything goes?"  Because that is what you are proposing.  There is no "challenge" to putting assets in the Carrara scene tab.

    I am not opposed to "anything goes," although I don't see where it is ultimately any different from making a render and posting it in the Community Art Gallery thread, or any other thread.

    So yes, in answer to your question, the constraints are set by the individual artist - and that kind of constraint is the most difficult of all !

    No offense, but that doesn't mean anything to me unless you define "constraint."  I set my own constraints all the time.  On occasion, it's kind of fun to adhere to constraints set by others.  That is a big reason why I keep participating in the Challenge.

    Whatever.  I will participate by following your original suggestion, and base my renders on native content from the scene tab.

    No offense taken.

    Thank you for taking my original suggestion as your guide.

     

    regards from Oz!

  • HeadwaxHeadwax Posts: 9,969
    edited April 2023

    Here's splats used as rain makeres.

    Made a PNG with Ron's Rain, put that on the splats and replicated them through the scene into the distance.

    Howi'e's Hapsberg and a low res guy

    Something went weird with Carrara and the render turned out semi transparent - didn't have any apha bits turned on in the render page  - the pngs were 9000 pixels square so I think it was either a memory issue or a splat issue.

    I had to join a few render passes to save the scene

    ???

    Howi's Hapsberg was already found in the Scene Browser

     

    original 

     

     

    Harpsburg_scene.jpg
    3077 x 4000 - 2M
    Harpsburg_scene_MaterialDiffuse.jpg
    3077 x 4000 - 2M
    Post edited by Headwax on
Sign In or Register to comment.