Loading...
> >

Animal lovers: Tasmanian Devil released [Commercial]

Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
edited February 2016 in Daz PA Commercial Products

"If you are looking for a critter with lot of personality, you can't miss the Tasmanian Devil, the world's largest carnivorous marsupial, accurately recreated as a 3D model for your renders! Rigging has been extended to single toes and fingers in order to provide the best posing, and several morphs allow to finely tune and modify some anatomic details."

http://www.daz3d.com/tasmanian-devil-by-am

I want to thank Shozai for helping me and making awesome promo images!

main.jpg
1000 x 1300 - 932K
popup1.jpg
1300 x 1000 - 1M
popup2.jpg
1000 x 1300 - 507K
popup3.jpg
1300 x 1000 - 350K
popup4.jpg
1000 x 1300 - 382K
Post edited by Chohole on

Comments

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621

    More promos...

     

    popup5.jpg
    1300 x 1000 - 311K
    popup6.jpg
    1000 x 1300 - 1M
    popup7.jpg
    1300 x 1000 - 1M
    popup8.jpg
    1300 x 1000 - 799K
    popup9.jpg
    1000 x 1300 - 496K
  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    edited February 2016

    And also a Youtube turntable movie to better see the devil shape...

    popup10.jpg
    1300 x 1000 - 484K
    tasmanian devils feasting.jpg
    1600 x 1155 - 1M
    Post edited by Alessandro Mastronardi on
  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621

    Yesterday I made also a very quick wallaby carcass that you may want to use in your scene, available as a freebie here: http://www.alessandromastronardi.com/downloads/wallabyCarcass.zip

    I packed it as a .OBJ plus textures; you can simply import it in DAZ Studio (or other 3D apps), textures will load automatically.

    carcass1.jpg
    1117 x 835 - 113K
    carcass2.jpg
    1113 x 835 - 102K
    carcass3.jpg
    1118 x 837 - 106K
  • KnittingmommyKnittingmommy Posts: 8,191

    Looks great, AM.  I have to wait until the first, but then he is definitely in my cart!  There are times when I really hate waiting.  When your furries come out and I have to wait, is one of them.  Love the promos above!

  • alexhcowleyalexhcowley Posts: 2,386

    This one went straight into the cart.  I'm going to install it on Friday and let in run amok around my runtime on Saturday.

    Cheers,

    Alex.

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    alexhcowley said:

    This one went straight into the cart.  I'm going to install it on Friday and let in run amok around my runtime on Saturday.

    Cheers,

    Alex.

    Thanks Alex, I'll keep an eye to your gallery album! :D

  • StezzaStezza Posts: 8,061

    I saw it I bought it

    installed it....

     

    but

    once again in Carrara there are problems.. none of the morphs work.. can't even get him to open his mouth.

    crying

  • LintonLinton Posts: 542

    This is an amazing model of the Tassie Devil, feeling a little homesick now!

    May I ask what forest scene was used to create the two sleeping devils? And, will it need to be rendered in 3Delight to get the hair to show, or is LAMH now working normally in iRay?

  • SaiyanessSaiyaness Posts: 715

    Spread the Tasmanian Devil love!! Love the little psychos!! Protect the species!! :D  

    Fantastic job on this, Alessandro! You're amazing!! Can't wait to see what you do next!! 

     

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Stezza said:

    I saw it I bought it

    installed it....

     

    but

    once again in Carrara there are problems.. none of the morphs work.. can't even get him to open his mouth.

    crying

    Hello, I feared that could be the case: I'd like that DAZ Studio would generate compliant morphs with Carrara. To make it work I'd have to make a Poser .cr2 figure, manually edit the .cr2 to change some code lines that make the morph work with Carrara, pack it and upload it. I'll see to do it as I get some time.

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Linton said:

    This is an amazing model of the Tassie Devil, feeling a little homesick now!

    May I ask what forest scene was used to create the two sleeping devils? And, will it need to be rendered in 3Delight to get the hair to show, or is LAMH now working normally in iRay?

    Hi, that image was done by Shozai, I honestly don't know what forest items she used. As we speak, I've sent her a link to this thread so that she may answer to you.

    About the hair, there is no direct support for Iray, meaning that you first have to use LAMH to convert to OBJ (or Fiberhair if you have the full version) and then you can render to Iray.
    I made a brief tutorial about this procedure here:

    I've used the Wolf model but the same method applies to every LAMH based character. It's a very simple process IMO.
     

     

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Saiyaness said:

    Spread the Tasmanian Devil love!! Love the little psychos!! Protect the species!! :D  

    Fantastic job on this, Alessandro! You're amazing!! Can't wait to see what you do next!! 

     

    Many thanks! I do have lot of critters currently under development. I usually post updates on my FB art page: https://www.facebook.com/alessandromastronardi.wildlifeartist
    Since not everybody use FB, I was thinking to open a thread over here where to post my work in progress stuff, but I'm not sure which forum would be the most appropriate.

  • ShozaiShozai Posts: 30

    Hello :)

    the little Forest Scene you can find here:

    http://hivewire3d.com/fallen-tree-3415.html

     

    Have nice Days :)

    -Shozai

  • LintonLinton Posts: 542
    edited February 2016

    Fantastic, thanks Shozai!

    Alesssandro, love your animals series! Out of curiosity, your great white shark/megalodon, any chance you're working on iRay textures, or new models of sharks? I love the original ones, and use them so often. Any chance of a modern croc too? I'd love to sink one below the surface of your tropical ponds, ready to sneak upon unsuspecting warthogs! I will check out the LAMH tutorial, I  still need time for rendering the wolf, koala and kangaroo at some point in my future renders, grabbed them at their launch, such awesome figures.

    Post edited by Linton on
  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    edited February 2016
    Linton said:

    Fantastic, thanks Shozai!

    Alesssandro, love your animals series! Out of curiosity, your great white shark/megalodon, any chance you're working on iRay textures, or new models of sharks? I love the original ones, and use them so often. Any chance of a modern croc too? I'd love to sink one below the surface of your tropical ponds, ready to sneak upon unsuspecting warthogs! I will check out the LAMH tutorial, I  still need time for rendering the wolf, koala and kangaroo at some point in my future renders, grabbed them at their launch, such awesome figures.

    Thanks, Linton!
    I have a set of sharks under development: one is a remake of the great white you mentioned, with better details and morphs, then also a hammerhead, a whale shark and a basking shark (attached a test render I did of the basking shark). The crocs... mmmhhh well the ones available IMO are still quite modern, they also come with 8K textures and are pretty much detailed, if these are the one we are talking about:

    http://www.daz3d.com/crocodilia-1-alligator-and-caiman
    http://www.daz3d.com/crocodilia-2-gharial-and-crocodile

    Here some renders I did with those...

     

    alessandro-mastronardi-basking-shark.jpg
    1200 x 900 - 88K
    alessandro-mastronardi-beast.jpg
    1400 x 932 - 225K
    alessandro-mastronardi-caiman-underwater.jpg
    1200 x 900 - 182K
    alessandro-mastronardi-okefenokee-by-papillon68-d84o1fg.jpg
    1920 x 1080 - 362K
    Post edited by Alessandro Mastronardi on
  • LintonLinton Posts: 542

    Yes I have the Gharial and Crocodile ones, both poses and morphs for those are wonderful. I was hoping for some iRay textures, to best capture the new lighting systems and show the character models as a little less plastic.

    However, I am so excited to hear the great white is up for updating. May I request clasper morphs, remora's, scarring options, fin nicks, cuts, bites, and copepods along the mouth, eyes, and fins? A sagging morph for the jaw, belly, gill vents, stomach, and a pregnancy morph for the female would be awesome! And even a texture that shows the dappling of light from the sun glinting through the water! So excited for the other sharks as well, hammerheads, whale sharks, and basking sharks are all so beautiful!

    I know, I ask alot, I just love sharks so much, and your work on the Great White and Megalodon filled my render cycles for months.

    Also, I want to thank you for representing the Australian fauna, kangaroo, koala, Tassie Devil, and Thylacine, and the Indigenous people in the Gurumarra by you and LMX3D. Such great additions to the 3D market, while niche, they are appreciated!

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Linton said:

    Yes I have the Gharial and Crocodile ones, both poses and morphs for those are wonderful. I was hoping for some iRay textures, to best capture the new lighting systems and show the character models as a little less plastic.

    However, I am so excited to hear the great white is up for updating. May I request clasper morphs, remora's, scarring options, fin nicks, cuts, bites, and copepods along the mouth, eyes, and fins? A sagging morph for the jaw, belly, gill vents, stomach, and a pregnancy morph for the female would be awesome! And even a texture that shows the dappling of light from the sun glinting through the water! So excited for the other sharks as well, hammerheads, whale sharks, and basking sharks are all so beautiful!

    I know, I ask alot, I just love sharks so much, and your work on the Great White and Megalodon filled my render cycles for months.

    Also, I want to thank you for representing the Australian fauna, kangaroo, koala, Tassie Devil, and Thylacine, and the Indigenous people in the Gurumarra by you and LMX3D. Such great additions to the 3D market, while niche, they are appreciated!

    Thanks for the details you asked, actually I like to receive this kind of feedback!

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Linton said:

    Yes I have the Gharial and Crocodile ones, both poses and morphs for those are wonderful. I was hoping for some iRay textures, to best capture the new lighting systems and show the character models as a little less plastic.

    I see what you mean, with the default IRay shader they indeed look glossy. I'll see to update the model for Iray, good catch.

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Stezza said:

    I saw it I bought it

    installed it....

     

    but

    once again in Carrara there are problems.. none of the morphs work.. can't even get him to open his mouth.

    crying

    Just PM'd you if you wanna try a Poser converted figure for the devil with working morphs in Carrara...

     

  • alexhcowleyalexhcowley Posts: 2,386
    Alessandro_AM said:
    Saiyaness said:

    Spread the Tasmanian Devil love!! Love the little psychos!! Protect the species!! :D  

    Fantastic job on this, Alessandro! You're amazing!! Can't wait to see what you do next!! 

     

    Many thanks! I do have lot of critters currently under development. I usually post updates on my FB art page: https://www.facebook.com/alessandromastronardi.wildlifeartist
    Since not everybody use FB, I was thinking to open a thread over here where to post my work in progress stuff, but I'm not sure which forum would be the most appropriate.

     

    A wip thread sounds like a great idea, Alessandro. I  would suggest putting it in either this forum or the commons.

    Cheers,

    Alex.

  • ChoholeChohole Posts: 33,604

    Daz Commercial products is the best place for Commercial WIP threads.

  • StezzaStezza Posts: 8,061
    Alessandro_AM said:
    Stezza said:

    I saw it I bought it

    installed it....

     

    but

    once again in Carrara there are problems.. none of the morphs work.. can't even get him to open his mouth.

    crying

    Just PM'd you if you wanna try a Poser converted figure for the devil with working morphs in Carrara...

     

    that's great.... looking forward to it yes

  • alexhcowleyalexhcowley Posts: 2,386

    Alessandro,

    Here's a couple of renders of your new born on the prowl in the Enchanted Forest.

    Next week, I  hope to post some renders of Captain Serena and her kitties.

    Cheers,

    Alex.

    Enchanted Tasmanian A1 Small.jpg
    2000 x 1250 - 331K
    Enchanted Tasmanian C3 Small.jpg
    2000 x 1250 - 214K
  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    alexhcowley said:

    Alessandro,

    Here's a couple of renders of your new born on the prowl in the Enchanted Forest.

    Next week, I  hope to post some renders of Captain Serena and her kitties.

    Cheers,

    Alex.

    Lovely renders Alex!

     

Sign In or Register to comment.