Loading...
> >

Like a Phoenix from the Ashes, Who Wants to Render a Superhero?

1…1112141617…48

Comments

  • KickAir 8PKickAir 8P Posts: 1,865
    edited December 1969

    RAMWolff said:
    Sweet picture Beth! :-)

    Thanks!
  • RKane_1RKane_1 Posts: 3,037
    edited December 1969

    KickAir 8P said:
    RKane_1 said:
    *chuckle*

    A- friggin'-dorable.

    What kind of postwork did you need to do, though? It looks like a straight render.

    Great job, btw. Not only in the render and postwork but in overall composition AND setting a mood.


    The postwork's to balance the light'n'shadows better and make the colors pop, details here. Thanks, glad you liked!

    Thanks for the tutorial. I am going to read it a little later!

    For sunlight, I have been undoing the paramater maximum and cranking the lights up to 300% intensity and adding a slight orange hue. It warms things up a bit.

    I look forward to your tutorial and thank you so much for taking the time to write it!

  • JohnDelaquioxJohnDelaquiox Posts: 1,195
    edited December 1969

    Batman using Joe's Golden Age Batman and Xurge3D Flexx Suit

    I_am_batman.jpg
    1334 x 1886 - 239K
  • TJohnTJohn Posts: 11,099
    edited December 1969

    JohnDelaquiox said:
    Batman using Joe's Golden Age Batman and Xurge3D Flexx Suit



    Very cool! Should be viewed at full size...I was very impressed with the detail and pose. Well done, John!
  • JohnDelaquioxJohnDelaquiox Posts: 1,195
    edited September 2012

    Here is the same set up only this time using Hal and Isikols Batman mask and another with one of Joe's older masks

    I_Am_Batman_2.jpg
    1334 x 1886 - 197K
    I_Am_Batman_1.jpg
    1334 x 1886 - 197K
    Post edited by JohnDelaquiox on
  • JoeQuickJoeQuick Posts: 1,704
    edited September 2012

    some attempts with more realistic shaders

    batman-and-sons-again-altlight1web.jpg
    1280 x 800 - 487K
    BatmanAndSonsRealistic3.jpg
    1280 x 800 - 776K
    Post edited by JoeQuick on
  • JohnDelaquioxJohnDelaquiox Posts: 1,195
    edited December 1969

    The newer shaders looks great joe!

  • JoeQuickJoeQuick Posts: 1,704
    edited September 2012

    JohnDelaquiox said:
    The newer shaders looks great joe!

    thanks, I'm going to try to put out a pack of them pretty soon on sharecg. It'll be a set of leathers, cottons, metals and scale mail similar to what was included with golden age as poser materials only now as daz shaders.

    With this one I went back to the same composition as the visual style cartoony render.

    batmanandsonsweb.jpg
    1280 x 800 - 332K
    BatmanAndSonsR2web2.jpg
    1280 x 800 - 387K
    BatmanAndSonsR2web.jpg
    1280 x 800 - 573K
    Post edited by JoeQuick on
  • JoeQuickJoeQuick Posts: 1,704
    edited December 1969

    When I first started using poser, it was as an aid for drawing. Slowly as time's gone on, I've virtually stopped using it for that and instead focused more and more on content creation. Today, I decided to try to draw the Batman and sons shot. These are the faces. I might go back and start over using the composition from the visual style render instead since it's a little bit more dynamic.

    grayson.jpg
    375 x 600 - 58K
    drake.jpg
    375 x 600 - 66K
    damian.jpg
    375 x 600 - 77K
    bathead.jpg
    375 x 600 - 68K
  • JohnDelaquioxJohnDelaquiox Posts: 1,195
    edited December 1969

    that's fantastic!

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Looks really good Joe. I like your drawing style! Very pulp type with the heavy blacks.

  • ISIKOLISIKOL Posts: 386
    edited December 1969

    JohnDelaquiox said:
    Here is the same set up only this time using Hal and Isikols Batman mask and another with one of Joe's older masks

    John haven't you got the final version of the mask?

    http://www.sharecg.com/v/55042/related/11/Poser/Batman-Cowl-for-M4

  • JohnDelaquioxJohnDelaquiox Posts: 1,195
    edited December 1969

    I got it now thanks

  • ISIKOLISIKOL Posts: 386
    edited December 1969

    JohnDelaquiox said:
    I got it now thanks

    it was re-modeled by this guy... www.deligaris.com

    who is the most awesome modeler i have known...

    and it was done in 30 minutes in front of my eyes!

    got a little bit shocked by his speed at max and zbrush!

  • JohnDelaquioxJohnDelaquiox Posts: 1,195
    edited September 2012

    That's cools

    what cape do you usually use with this version of the mask

    Post edited by JohnDelaquiox on
  • charliecrenshaw44_788e6ff863charliecrenshaw44_788e6ff863 Posts: 33
    edited December 1969

    Johnny Storm is just a little pissed. Thanks to Joequick for the Fantastic Four outfit.

    Johnny_Storm_001.jpg
    1118 x 746 - 382K
  • ISIKOLISIKOL Posts: 386
    edited December 1969

    JohnDelaquiox said:
    That's cools

    what cape do you usually use with this version of the mask

    lately i use dynamic capes (anyone would be fine...i like sshogans from rendo)

    it seems that conforming capes are difficult to look realistic...

  • ISIKOLISIKOL Posts: 386
    edited December 1969

    someone sent me a fantastic batman outfit and asked me to try and rigged it for m4...

    a friend of mine said its very difficult cause its not made over m4 (different topology) and it seems like a 3d scan...

    too bad cause it was a nice outfit...

    wish someone could model it...

    batman.jpg
    736 x 1161 - 171K
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    If it's an OBJ format it can be fitted to Genesis. I know many in here don't use Genesis but that's all I can suggest. Joe might be able to do it for M4 if it lines up with M4. The arms down like that, not sure though!

  • JoeQuickJoeQuick Posts: 1,704
    edited December 1969

    RAMWolff said:
    If it's an OBJ format it can be fitted to Genesis. I know many in here don't use Genesis but that's all I can suggest. Joe might be able to do it for M4 if it lines up with M4. The arms down like that, not sure though!

    Yeah, I couldn't help but puzzle through solutions.

    1) someone smarter than me just rigs it, cough, Hal, cough
    2) stick m4 in that pose and then run a cloth simulation where the suit is set constrained and m4 returns to his t pose
    3) use genesis and the transfer tool to rig it and get it in the tpose, then rig it for m4
    4) keep the legs and torso and just make new arms

  • ISIKOLISIKOL Posts: 386
    edited December 1969

    Joequick said:
    RAMWolff said:
    If it's an OBJ format it can be fitted to Genesis. I know many in here don't use Genesis but that's all I can suggest. Joe might be able to do it for M4 if it lines up with M4. The arms down like that, not sure though!

    Yeah, I couldn't help but puzzle through solutions.

    1) someone smarter than me just rigs it, cough, Hal, cough
    2) stick m4 in that pose and then run a cloth simulation where the suit is set constrained and m4 returns to his t pose
    3) use genesis and the transfer tool to rig it and get it in the tpose, then rig it for m4
    4) keep the legs and torso and just make new arms

    *coughing mode also on..Hal was the one who said its too dificult to be done...coughing mode off...

    i know its a lot of work for everyone to do it for free and my economic current state is a little above zero...

    anyway...here is a little Black Widow, pin up style kinda...

    widow2-copy.jpg
    1086 x 1500 - 721K
  • JohnDelaquioxJohnDelaquiox Posts: 1,195
    edited December 1969

    That is super hot Isikol

  • rdudarduda Posts: 579
    edited December 1969

    Isikol said:
    someone sent me a fantastic batman outfit and asked me to try and rigged it for m4...

    a friend of mine said its very difficult cause its not made over m4 (different topology) and it seems like a 3d scan...

    too bad cause it was a nice outfit...

    wish someone could model it...


    I can use it as a guide and remake it for M4, and then if we had the rigging help we could do it. do you have a obj file? Maybe this will get me back on track for my other batman mask I started way back.
  • TimbalesTimbales Posts: 2,332
    edited December 1969

    Isikol said:

    anyway...here is a little Black Widow, pin up style kinda...

    awesome


    Genesis Aquaman using the Supersuit and customized shaders

    Aquaman.jpg
    772 x 1000 - 261K
  • JohnDelaquioxJohnDelaquiox Posts: 1,195
    edited December 1969

    nice work Timg

    Armor games just put up a super hero game with some very nice character design

    Legacy of Heroes

    http://armorgames.com/legacy-of-heroes-game/13737

  • JoeQuickJoeQuick Posts: 1,704
    edited December 1969

    Cagnazzo82 said:
    This might be a bit out there, but here's a recent render I did featuring Captain America captured by a couple villains after a brutal fight.

    The cyborgs are perhaps one of my favorite characters to come out recently, so I've substituted red skull with a red-skulled cyborg. The best thing about him is that the business and military suits all fit him perfectly since the body's based off M4 :)

    With all the cloning and consciousness transferring over the years, a cyborg seems reasonable.

  • rdudarduda Posts: 579
    edited December 1969

    Thanks for sending over the Obj batman suit, I was able to take some time last night and start the cowl, what do you think so far (M4):

    Bat.jpg
    687 x 502 - 145K
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    TimG said:
    Isikol said:

    anyway...here is a little Black Widow, pin up style kinda...

    awesome


    Genesis Aquaman using the Supersuit and customized shaders

    Your Aquaman totally rocks Tim! WOW!

  • ISIKOLISIKOL Posts: 386
    edited December 1969

    Amazing!!!

  • TimbalesTimbales Posts: 2,332
    edited December 1969

    thanks :)

This discussion has been closed.