Loading...
> >

CAR AND BIKE LOVERS THREAD - MARK III

music2u4umusic2u4u Posts: 2,822
edited June 2015 in Art Studio

The Mark II Model was here


Tramp Graphics said:
music2u4u said:
"AH...that ain't a knife....**whips out his huge Bowie knife and sticks it in the robber's face**..."now, THATS a knife!"

(Crocodile Dundee, when the guy pulls a pin knife on him in an alley to try to rob him....the robber ends up running for his life!!!)

EXACTLY!!!!

Hehehehe!

:-)

Post edited by Chohole on
«134567…50

Comments

  • none01ohonenone01ohone Posts: 862
    edited December 1969

    Started to apply shaders to this Audi obj, but dropped it after I noticed that some textures were shared. Lights with the grill and bodywork with the tyres/tires. The Yosimite HDRI looks good though.

    Audi.jpg
    1020 x 573 - 457K
  • John SimsJohn Sims Posts: 360
    edited December 1969

    It is possible (but very tedious) to define your own surface groups in DAZ so it is possible to get around that. It is spectacularly frustrating though.

  • none01ohonenone01ohone Posts: 862
    edited December 1969

    Thought so, I might go back to it at a later date.
    I may try to apply new textures in Wings3D, as you can select adjacent poly's with the plus key. Wings3D is an excellent little modeller for tinkering.

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Doc's New Caddy!

    docs_new_caddy.jpg
    1900 x 1068 - 413K
  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    The New Ones Are Here!

    the_new_ones_are_here.jpg
    1900 x 1068 - 437K
  • JaderailJaderail Posts: 0
    edited October 2013

    5 posts to go then a split folks. We watching it for you.

    Post edited by Jaderail on
  • usherstangusherstang Posts: 89
    edited December 1969

    well after 2 1/2 years of searching i have finally gotten my 1978 chevy monte carlo model for sketchup. here are some renderings of what im planning 2 do when i get my 1978 monte carlo. feed back would b appreciated so i can kno wat u guys think.

    robs_custom_1978_monte_carlo5.png
    1024 x 608 - 164K
    robs_custom_1978_monte_carlo4.png
    1024 x 608 - 64K
    robs_custom_1978_monte_carlo3.png
    1024 x 608 - 67K
    robs_custom_1978_monte_carlo1.png
    1024 x 608 - 51K
    robs_custom_1978_monte_carlo.png
    1024 x 608 - 80K
  • Dave SavageDave Savage Posts: 2,433
    edited December 1969

    This has probably been asked before, but it's a long thread to look through so here goes.
    Hope someone can help. I'm looking for a 57 (or 58) Plymouth Fury, like Steven King's Christine.

    I use Poser and Bryce so something that'll import in to either of those would be cool.


    Meanwhile, my latest design, including the 51 Ford F1 truck.

    PaperTest.jpg
    1200 x 1451 - 712K
  • bighbigh Posts: 8,147
    edited December 1969

    time to hit the road

    01_truck.jpg
    1029 x 694 - 276K
  • RenolaceRenolace Posts: 46
    edited October 2013

    TheSavage64 said:
    This has probably been asked before, but it's a long thread to look through so here goes.
    Hope someone can help. I'm looking for a 57 (or 58) Plymouth Fury, like Steven King's Christine.

    I use Poser and Bryce so something that'll import in to either of those would be cool.


    Meanwhile, my latest design, including the 51 Ford F1 truck.

    There are several on the gta sites, here's one: http://www.gtainside.com/en/download.php?do=cat&id=396&start=7&orderBy;=

    and a few in sketchup warehouse:
    http://sketchup.google.com/3dwarehouse/details?mid=58e84ddc9d5a5eb4b456cddce1a7b06f&prevstart=0
    http://sketchup.google.com/3dwarehouse/details?mid=ae0cb42ad702edf880288501d9901d7b&prevstart=0
    http://sketchup.google.com/3dwarehouse/details?mid=e23b48a5f992fc865225b2095509ba5a&prevstart=0

    There are probably more as Christine is a popular car,

    And there is the immortal elegance car in the DAZ store.
    http://www.daz3d.com/immortal-elegance

    Post edited by Renolace on
  • none01ohonenone01ohone Posts: 862
    edited December 1969

    @usherstang

    Are you planning to use Daz Studio to render, if you do you'll have to save the file as a google earth object then rename the extension to .zip.
    That will give you the texture maps.
    Do a search for obj exporter plugin for sketchup, that will give you the option to save as an obj. Not all conversions will look good though, it depends on the model. If your in luck the surfaces will be separate which will help with re-applying new surface shaders.
    There are some good free shaders at ShareCG for the chrome, glass and carpaint surfaces.

  • none01ohonenone01ohone Posts: 862
    edited December 1969

    Cadillac Fleetwood 1933. (Renderlife model)
    Freebie in multi formats from latest 3DArtist mag. (also has Sherman tank)

    Cadillac-Fleetwood-1933-blue.jpg
    1020 x 573 - 522K
  • Dave SavageDave Savage Posts: 2,433
    edited December 1969

    Renolace said:
    TheSavage64 said:
    This has probably been asked before, but it's a long thread to look through so here goes.
    Hope someone can help. I'm looking for a 57 (or 58) Plymouth Fury, like Steven King's Christine.

    I use Poser and Bryce so something that'll import in to either of those would be cool.


    Meanwhile, my latest design, including the 51 Ford F1 truck.

    There are several on the gta sites, here's one: http://www.gtainside.com/en/download.php?do=cat&id=396&start=7&orderBy;=

    and a few in sketchup warehouse:
    http://sketchup.google.com/3dwarehouse/details?mid=58e84ddc9d5a5eb4b456cddce1a7b06f&prevstart=0
    http://sketchup.google.com/3dwarehouse/details?mid=ae0cb42ad702edf880288501d9901d7b&prevstart=0
    http://sketchup.google.com/3dwarehouse/details?mid=e23b48a5f992fc865225b2095509ba5a&prevstart=0

    There are probably more as Christine is a popular car,

    And there is the immortal elegance car in the DAZ store.
    http://www.daz3d.com/immortal-elegance

    Sadly I've been down the GTA route before and don't have any software capable of converting the downloads so I can import them into either Poser or Bryce (on a Mac).

    I already looked in the Google warehouse and there is one possibility, but again, it's going to be a complicated job to re set all the materials in Bryce because it's not a particularly friendly set of meshes and there are thousands of them which would all need renaming and the materials re-setting. I've downloaded it anyway as a last resort. It looks nice when I render it in Sketchup though (see below). :)

    Yes, I'd seen the Immortal Elegance and it's on my Wish List as that really will be the ideal one to use (from past experience)... I can't buy it until I earn some more DAZ credit and I was hoping to get started on my Plymouth renders sooner than that's likely to happen.

    Thanks muchly for your help, I really appreciate it. :)

    FurySketch.jpg
    1190 x 795 - 372K
  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    The War of 1956

    the_war_of_1956.jpg
    1900 x 1068 - 516K
  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Okay, we be in the new thread now!

    sue_s_favorite_activity.jpg
    1900 x 1068 - 481K
  • Robert FreiseRobert Freise Posts: 4,462
    edited December 1969

    betsy662 said:
    Okay, we be in the new thread now!

    Nice shop pic
  • CherokeeCherokee Posts: 292
    edited October 2013

    Been playing around with several car but I'm not satisfied with them so I thought I'd drag this one out again and do a new render with it just for fun. Oh, by the way, that's a Sketchup 1958 Plymouth rendered in Poser Pro 2012.

    1958_Plymouth_Christine.jpg
    1147 x 877 - 163K
    Post edited by Cherokee on
  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Thanks Robert, I had used that same render in the last thread, but wanted to carry it over to this one as well.

  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    WAHOO! Mark III it is. Let's do it again folks.

    Cherokee...nice render. Are you sure that's not a 57?

    :-)

  • music2u4umusic2u4u Posts: 2,822
    edited October 2013

    none01ohone said:
    Cadillac Fleetwood 1933. (Renderlife model)
    Freebie in multi formats from latest 3DArtist mag. (also has Sherman tank)

    WOW! Nice reflections and love the chrome. Really nice.

    :-)

    Cadillac-Fleetwood-1933-blue.jpg
    1020 x 573 - 522K
    Post edited by music2u4u on
  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    Lots of cool renders so far.

    Nice work Betsy on the caddies!

    :-)

  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    usherstang said:
    well after 2 1/2 years of searching i have finally gotten my 1978 chevy monte carlo model for sketchup. here are some renderings of what im planning 2 do when i get my 1978 monte carlo. feed back would b appreciated so i can kno wat u guys think.

    I think it ROCKS!

    :-)

  • music2u4umusic2u4u Posts: 2,822
    edited October 2013

    bigh said:
    time to hit the road

    Love the brown theme for this one. Just super!

    :-)

    01_truck.jpg
    1029 x 694 - 276K
    Post edited by music2u4u on
  • CherokeeCherokee Posts: 292
    edited December 1969

    music2u4u said:
    WAHOO! Mark III it is. Let's do it again folks.

    Cherokee...nice render. Are you sure that's not a 57?

    :-)

    No, it's a 1958. The 1957 had vertical slots for the center section under the bumper and the center "headlights" were smaller.

    Here is a photo of a 1957 Plymouth Fury for comparison.

    1957_Plymouth_Fury.jpg
    1024 x 685 - 233K
  • bighbigh Posts: 8,147
    edited December 1969

    music2u4u said:
    bigh said:
    time to hit the road

    Love the brown theme for this one. Just super!

    :-)

    thank you :-)

  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    Renolace said:
    TheSavage64 said:
    This has probably been asked before, but it's a long thread to look through so here goes.
    Hope someone can help. I'm looking for a 57 (or 58) Plymouth Fury, like Steven King's Christine.

    I use Poser and Bryce so something that'll import in to either of those would be cool.


    Meanwhile, my latest design, including the 51 Ford F1 truck.

    There are several on the gta sites, here's one: http://www.gtainside.com/en/download.php?do=cat&id=396&start=7&orderBy;=

    and a few in sketchup warehouse:
    http://sketchup.google.com/3dwarehouse/details?mid=58e84ddc9d5a5eb4b456cddce1a7b06f&prevstart=0
    http://sketchup.google.com/3dwarehouse/details?mid=ae0cb42ad702edf880288501d9901d7b&prevstart=0
    http://sketchup.google.com/3dwarehouse/details?mid=e23b48a5f992fc865225b2095509ba5a&prevstart=0

    There are probably more as Christine is a popular car,

    And there is the immortal elegance car in the DAZ store.
    http://www.daz3d.com/immortal-elegance

    The GTA one is for GTA IV. We have not been able to find a program that will convert these files. Only SA and Vice City.

    :-)

  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    Cherokee said:
    music2u4u said:
    WAHOO! Mark III it is. Let's do it again folks.

    Cherokee...nice render. Are you sure that's not a 57?

    :-)

    No, it's a 1958. The 1957 had vertical slots for the center section under the bumper and the center "headlights" were smaller.

    Here is a photo of a 1957 Plymouth Fury for comparison.

    Ahhhh...the grill....well I'll be a suck egg mule!

    :-)

  • music2u4umusic2u4u Posts: 2,822
    edited October 2013

    Hey Betsy...our 390 Caddy engine has been revamped from sketchup.

    http://sketchup.google.com/3dwarehouse/details?mid=465ebe1545305da078b5f47c5c34e2b7

    :-)

    download.jpg
    373 x 287 - 15K
    Post edited by music2u4u on
  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    Try this guy out for GTA conversions to sketchup. About 300 cars here converted. Some are pretty good.

    http://sketchup.google.com/3dwarehouse/search?uq=0419176676322435720613732&scoring=m

    :-)

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    music2u4u said:
    Hey Betsy...our 390 Caddy engine has been revamped from sketchup.

    http://sketchup.google.com/3dwarehouse/details?mid=465ebe1545305da078b5f47c5c34e2b7

    :-)

    I see that, I already downloaded it again, we shall see!

This discussion has been closed.