Loading...
> >

2013 PA Giveaway!

1…89111314

Comments

  • cecilia.robinsoncecilia.robinson Posts: 2,208
    edited December 1969

    Teresa Tyllo said:
    Cecilia,
    Yes, I'm sure you can make freebies with those textures.
    All 2013 Xmas freebies are hosted at DAZ under their licence so I myself don't see any problem to use those textures in making free mats for clothes..etc....
    Warm greetings.
    -Teresa

    Splendid, I'm very grateful! Many creators of merchant resources don't allow making freebies (I wonder why, the customer pays for the set anyway). I appreciate the gesture and if I make something, you'll definitely get it :D.

  • KeryaKerya Posts: 10,943
    edited December 1969

    Thank you Teresa! And for the Barockian too!
    http://www.daz3d.com/december-freebies/barockian

  • WilmapWilmap Posts: 2,917
    edited December 1969

    Thanks Teresa for the wonderful textures, they are both great.:-)

  • DestinysGardenDestinysGarden Posts: 2,550
    edited December 1969

    Day 12 - 20Decemeber
    tyllo_Barockian by Teresa Tyllo
    http://www.daz3d.com/december-freebies/barockian

    tyllo_barockian.jpg
    350 x 455 - 108K
  • cecilia.robinsoncecilia.robinson Posts: 2,208
    edited December 1969

    The new set will definitely come in handy for historical reference. It's probably going to improve my writings too (when you have a visual reference, describing garments is always easier). Thanks, Teresa!

  • 3dLux3dLux Posts: 1,231
    edited December 1969

    Many thanks to the PAs for their generosity and Season's Greetings from the Philippines :)

  • TrishTrish Posts: 2,625
    edited December 1969

    Thank you very much for two great texture sets...Merry Christmas to you as well...Trish

  • FistyFisty Posts: 3,416
    edited December 1969

    Man there has been some nice stuff this year, thanks to everyone =)

  • AlowynAlowyn Posts: 33
    edited December 1969

    You've been busy this season!
    Thank you once again for more lovely textures, Tyllo!
    -D

  • Teresa TylloTeresa Tyllo Posts: 141
    edited December 2013

    Thanks folks for your nice comments on "Barockian"!
    Happy Holidays to all of you! :)
    Below there is a pic with the rest of textures that I didn't show on my general preview (click pic for better view)

    Barockian2.jpg
    850 x 586 - 298K
    Post edited by Teresa Tyllo on
  • JOdelJOdel Posts: 6,286
    edited December 1969

    Glorious. And SO seasonal...

    Thank you!

  • SlimerJSpudSlimerJSpud Posts: 1,453
    edited December 1969

    Thanks to the PAs for the wonderful gifts! :-)

  • ADAD Posts: 396
    edited December 1969

    Thanks to the PAs for These wonderful gifts. Happy Holidays and a happy new year to all.

  • Jeanne MJeanne M Posts: 652
    edited December 2013

    And thanks again!! For everything in between my last post and this one :)
    This time I found a nice festive hat and beautiful shader presets. Thank you so much!!

    Love, Jeanne

    Post edited by Jeanne M on
  • DestinysGardenDestinysGarden Posts: 2,550
    edited December 2013

    No newsletter last night. Hmm.

    Here is a two-fer for you today. Happy Holidays!

    Day 13 - 21December
    DG Metal Overlay Shader Presets by DestinysGarden
    http://www.daz3d.com/new-releases/dg-metal-overlay-shader-presets

    DA Festive Hat by Design Anvil
    http://www.daz3d.com/new-releases/da-festive-hat

    main_64_34.jpg
    350 x 455 - 57K
    dgholidaymetalmain.jpg
    350 x 455 - 48K
    Post edited by DestinysGarden on
  • cecilia.robinsoncecilia.robinson Posts: 2,208
    edited December 1969

    Thanks for both gifts. They stopped showing up under daz3d.com/december-freebies - I had to find them under New Releases. The hat did not display a price at all... Still, I managed to grab them and that is all that matters at the moment :).

  • Teresa TylloTeresa Tyllo Posts: 141
    edited December 1969

    Thanks so much for both seasonal freebies, DestinysGarden and Design Anvil! :)

  • IndigoJansonIndigoJanson Posts: 1,100
    edited December 1969

    Many thanks for the 3 newest gifts. Thanks to you all, I've been able to wrap my gifts and create a festive display... :)

    xmas_pic.jpg
    500 x 390 - 301K
  • DestinysGardenDestinysGarden Posts: 2,550
    edited December 1969

    Nice one Jindi! Thanks for sharing it.

  • Knight22179Knight22179 Posts: 1,195
    edited December 1969

    DestinysGarden said:
    No newsletter last night. Hmm.

    Here is a two-fer for you today. Happy Holidays!

    Day 13 - 21December
    DG Metal Overlay Shader Presets by DestinysGarden
    http://www.daz3d.com/new-releases/dg-metal-overlay-shader-presets

    DA Festive Hat by Design Anvil
    http://www.daz3d.com/new-releases/da-festive-hat

    Thanks DestinyGarden! :)

  • Charlie JudgeCharlie Judge Posts: 12,728
    edited December 1969

    Many thanks to all the participating PAs and to DAZ for generously hosting the giveaway.

    Sorry if this has been asked before but, if so, I missed it:
    While the item is only up (available for 'purchase') for 3 days, it evidently goes into the purchase history and is listed in the product library. Will it remain there like other items or does it need to be downloaded and backed up within a certain time?

    Thanks again for all the great gifts,
    Charlie

  • fixmypcmikefixmypcmike Posts: 19,583
    edited December 1969

    Charlie Judge said:
    Many thanks to all the participating PAs and to DAZ for generously hosting the giveaway.

    Sorry if this has been asked before but, if so, I missed it:
    While the item is only up (available for 'purchase') for 3 days, it evidently goes into the purchase history and is listed in the product library. Will it remain there like other items or does it need to be downloaded and backed up within a certain time?

    Thanks again for all the great gifts,
    Charlie

    Once "purchased" it stays in your Product Library even if it is no longer sold in the store.

  • AlowynAlowyn Posts: 33
    edited December 1969

    Thank you very much for both of todays offerings, DestinysGarden and Design Anvil!
    -D

  • barbultbarbult Posts: 24,240
    edited December 2013

    DestinysGarden said:
    Day 9 - 17December
    His EarStuff from Karth
    http://www.daz3d.com/new-releases/his-earstuff

    Thank you for this unique jewelry. I've figured out almost everything about how to use it, but I can't figure out how to get the LoopAddL and LoopAddR to move into position inside the HisStuffLoop on M6. The HisStuffLoop has a morph to move it to fit M6, but the LoopAdd items do not have any morphs. I tried moving the LoopAdd items with the X,Y, Z translate, but that didn't work very well. Do you have any tips?

    The Loops have material presets, but the AddLoop items do not. However, I was able to figure out how to use the UniShaders to color them. So now if I can just get them moved inside the loops, everything will be perfect!

    M6_HisStuff_Loops.jpg
    2000 x 1600 - 1M
    Post edited by barbult on
  • DestinysGardenDestinysGarden Posts: 2,550
    edited December 2013

    Another two-fer of really cool items.

    Day 14 - 22December

    Simple Veins HD by Sickleyield
    http://www.daz3d.com/new-releases/simple-veins-hd

    Wheely by 3djoji
    http://www.daz3d.com/new-releases/wheely

    3dj-wheely-main.jpg
    350 x 455 - 50K
    hdveins.jpg
    350 x 455 - 20K
    Post edited by DestinysGarden on
  • KarthKarth Posts: 709
    edited December 2013

    barbult said:
    DestinysGarden said:
    Day 9 - 17December
    His EarStuff from Karth
    http://www.daz3d.com/new-releases/his-earstuff

    Thank you for this unique jewelry. I've figured out almost everything about how to use it, but I can't figure out how to get the LoopAddL and LoopAddR to move into position inside the HisStuffLoop on M6. The HisStuffLoop has a morph to move it to fit M6, but the LoopAdd items do not have any morphs. I tried moving the LoopAdd items with the X,Y, Z translate, but that didn't work very well. Do you have any tips?

    The Loops have material presets, but the AddLoop items do not. However, I was able to figure out how to use the UniShaders to color them. So now if I can just get them moved inside the loops, everything will be perfect!

    Sorry that you have problems
    Select the LoopAdd and go to surface room.Make sure you have select a material.
    After that you can choose your any shader i add to the package. Go to Smart Content ..Shaders..Earstuff.

    I have upload a fix position morph
    You can download that here:
    Fix Add Loop M6

    Post edited by Karth on
  • HeraHera Posts: 1,957
    edited December 1969

    Wheely is simply THAT cute!!!!

  • ghost13ghost13 Posts: 19
    edited December 1969

    a BIG thank you to all the PA's :)

  • Knight22179Knight22179 Posts: 1,195
    edited December 1969

    DestinysGarden said:
    Another two-fer of really cool items.

    Day 14 - 22December

    Simple Veins HD by Sickleyield
    http://www.daz3d.com/new-releases/simple-veins-hd

    Wheely by 3djoji
    http://www.daz3d.com/new-releases/wheely

    I'm curious, will simple veins work on Genesis? The product page does say it can be used with any UV set, but I want to make sure. I don't have BM2 so it'd be great if this worked on Genesis. :)

  • Zev0Zev0 Posts: 7,089
    edited December 2013

    It won't work on Genesis1. It's HD geometry is specific to G2M EG saved on the G2M mesh. And because the polycount is different, cannot work on Genesis1. So the problem is not UV related, but mesh related.

    Post edited by Zev0 on
Sign In or Register to comment.