Loading...
> >

[In store now] Felidae by AM - Lion [Commercial]

Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
edited September 2019 in Daz PA Commercial Products

For the folks interested, my lion 3D model is available:
https://www.daz3d.com/felidae-by-am--lion
https://www.daz3d.com/felidae-by-am--lion--dforce-addon

It comes in all flavors, so LAMH, Catalyzer and DForce Hair too. Both male and female available in the set. Lot of morphs and poses. Hope you like it.

Felidae-Lion-main.jpg
2000 x 2600 - 3M
Felidae-Lion-dForce-main.jpg
2000 x 2600 - 2M
Felidae-Lion-popup2.jpg
2000 x 2600 - 4M
Felidae-Lion-popup3.jpg
2000 x 2600 - 3M
Felidae-Lion-popup4.jpg
1920 x 1464 - 645K
Post edited by Cris Palomino on
«1

Comments

  • StonemasonStonemason Posts: 1,180

    Looking good Alessandro!..Very nice work!

  • alexhcowleyalexhcowley Posts: 2,386

    This looks like it fixes at least one of the major problems with the existing DAZ Big Cat - it has much more realistic looking paws.  I'd be interested to see an open mouth shot, since a very poor mouth interior is the other major problem with the DBC.

    An excellent job.

    Cheers,

    Alex.

  • GoggerGogger Posts: 2,399
    alexhcowley said:

    This looks like it fixes at least one of the major problems with the existing DAZ Big Cat - it has much more realistic looking paws.  I'd be interested to see an open mouth shot, since a very poor mouth interior is the other major problem with the DBC.

    An excellent job.

    Cheers,

    Alex.

    There are a couple of good open mouth promos on the product page.

  • alexhcowleyalexhcowley Posts: 2,386
    Gogger said:
    alexhcowley said:

    This looks like it fixes at least one of the major problems with the existing DAZ Big Cat - it has much more realistic looking paws.  I'd be interested to see an open mouth shot, since a very poor mouth interior is the other major problem with the DBC.

    An excellent job.

    Cheers,

    Alex.

    There are a couple of good open mouth promos on the product page.

    I've just spotted them, thanks. The tongue is definitely a major improvement on the one in the DBC.

    Cheers,

    Alex.

  • GordigGordig Posts: 10,056

    Your inclusion of Felidae in the product name forces me to ask which other felidae we can hope to see from you.

  • Lothar WeberLothar Weber Posts: 1,611

    THIS product is fantastic....

  • EboshijaanaEboshijaana Posts: 504

    Ooh, nice!

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Stonemason said:

    Looking good Alessandro!..Very nice work!

    Thank you Stefan, didn't see you in a while, I'm glad to see you around again!

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    edited September 2019
    alexhcowley said:

    This looks like it fixes at least one of the major problems with the existing DAZ Big Cat - it has much more realistic looking paws.  I'd be interested to see an open mouth shot, since a very poor mouth interior is the other major problem with the DBC.

    An excellent job.

    Cheers,

    Alex.

    Hi Alex, I made this quickie to show you a bit of the mouth detail. It could be improved for sure, but I'd say it's overall decent. There are also morphs to make teeth and the whole body slightly asymmetric, and to extend the tongue. Cheers

     

    sshot-1.jpg
    1214 x 1464 - 320K
    Post edited by Alessandro Mastronardi on
  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Gordig said:

    Your inclusion of Felidae in the product name forces me to ask which other felidae we can hope to see from you.

    If I continue working, I think after the lion cub I will make the lynx, cheetah and perhaps the snow leopard.

  • alexhcowleyalexhcowley Posts: 2,386
    Alessandro Mastronardi said:
    alexhcowley said:

    This looks like it fixes at least one of the major problems with the existing DAZ Big Cat - it has much more realistic looking paws.  I'd be interested to see an open mouth shot, since a very poor mouth interior is the other major problem with the DBC.

    An excellent job.

    Cheers,

    Alex.

    Hi Alex, I made this quickie to show you a bit of the mouth detail. It could be improved for sure, but I'd say it's overall decent. There are also morphs to make teeth and the whole body slightly asymmetric, and to extend the tongue. Cheers

     

    A few quick renders of Alessandro's new kitten.

     Kitten:

    https://www.daz3d.com/felidae-by-am--lion

    Scene:

    https://www.daz3d.com/the-village-courtyard-bundle

    Iray converter:

    https://www.daz3d.com/rssy-3delight-to-iray-converter

    Water plane:

    https://www.daz3d.com/nature-ravine

    Pier:

    https://www.daz3d.com/lakeside-folly

     

    Flooded Courtyard 1.JPG
    3000 x 1875 - 708K
    Flooded Courtyard 2.JPG
    3000 x 1875 - 684K
    Flooded Courtyard 3.JPG
    3000 x 1875 - 739K
    Flooded Courtyard 4.JPG
    3000 x 1875 - 657K
  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    alexhcowley said:
    Alessandro Mastronardi said:
    alexhcowley said:

    This looks like it fixes at least one of the major problems with the existing DAZ Big Cat - it has much more realistic looking paws.  I'd be interested to see an open mouth shot, since a very poor mouth interior is the other major problem with the DBC.

    An excellent job.

    Cheers,

    Alex.

    Hi Alex, I made this quickie to show you a bit of the mouth detail. It could be improved for sure, but I'd say it's overall decent. There are also morphs to make teeth and the whole body slightly asymmetric, and to extend the tongue. Cheers

     

    A few quick renders of Alessandro's new kitten.

     Kitten:

    https://www.daz3d.com/felidae-by-am--lion

    Scene:

    https://www.daz3d.com/the-village-courtyard-bundle

    Iray converter:

    https://www.daz3d.com/rssy-3delight-to-iray-converter

    Water plane:

    https://www.daz3d.com/nature-ravine

    Pier:

    https://www.daz3d.com/lakeside-folly

     

    Great renders Alex, I like especially the second. Are these Catalyzer ones?

  • alexhcowleyalexhcowley Posts: 2,386
    Alessandro Mastronardi said:
    alexhcowley said:
    Alessandro Mastronardi said:
    alexhcowley said:

    This looks like it fixes at least one of the major problems with the existing DAZ Big Cat - it has much more realistic looking paws.  I'd be interested to see an open mouth shot, since a very poor mouth interior is the other major problem with the DBC.

    An excellent job.

    Cheers,

    Alex.

    Hi Alex, I made this quickie to show you a bit of the mouth detail. It could be improved for sure, but I'd say it's overall decent. There are also morphs to make teeth and the whole body slightly asymmetric, and to extend the tongue. Cheers

     

    A few quick renders of Alessandro's new kitten.

     Kitten:

    https://www.daz3d.com/felidae-by-am--lion

    Scene:

    https://www.daz3d.com/the-village-courtyard-bundle

    Iray converter:

    https://www.daz3d.com/rssy-3delight-to-iray-converter

    Water plane:

    https://www.daz3d.com/nature-ravine

    Pier:

    https://www.daz3d.com/lakeside-folly

     

    Great renders Alex, I like especially the second. Are these Catalyzer ones?

    Thanks for your support. You are not alone, the second one has already been favourited on Deviantart.  Personally, I prefer the first and third, I think the lighting is the best on these.  Yes, they were done with the catalyzer.

    Cheers,

    Alex.

  • ArtiniArtini Posts: 9,458
    edited September 2019

    How is catalyzer working in DS 4.12? Any improvements?

    Personally I am looking forward to the dForce version.

     

    Post edited by Artini on
  • Lothar WeberLothar Weber Posts: 1,611
    Artini said:

    How is catalyzer working in DS 4.12? Any improvements?

    Personally I am looking forward to the dForce version.

     

    4.12 is IMO extremely fast. Above image was rendered in 2 hours. With an Gtx 1070. In 4.10 it would be about 4 hour's. 

  • ArtiniArtini Posts: 9,458
    Lothar Weber said:
    Artini said:

    How is catalyzer working in DS 4.12? Any improvements?

    Personally I am looking forward to the dForce version.

     

    4.12 is IMO extremely fast. Above image was rendered in 2 hours. With an Gtx 1070. In 4.10 it would be about 4 hour's. 

    Ok, thanks for that information.

     

  • JoepingletonJoepingleton Posts: 746
    edited September 2019

    Absolutely gorgeous work Alessandro, Loving everything about this new lion.

    I have a question on how we can change the fur color.  I was trying to create a white lion and In your other Catalyzer animals I just change the skin color and the hair color changes.  Is there something different about this hair that I need to do to change the mane color?

    LionPair02.jpg
    960 x 960 - 354K
    NewLion01.jpg
    960 x 960 - 72K
    Post edited by Joepingleton on
  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    edited September 2019
    Joepingleton said:

    Absolutely gorgeous work Alessandro, Loving everything about this new lion.

    I have a question on how we can change the fur color.  I was trying to create a white lion and In your other Catalyzer animals I just change the skin color and the hair color changes.  Is there something different about this hair that I need to do to change the mane color?

    Great renders Joe, I'm glad you like it. With the Catalyzer it's pretty easy, you just use the Diffuse Overlay: pick a color, and how much to apply. See attached screenshot... And of course if you like you can also desaturate the model texture to make it white or greyish (whixh I didn't in this case). Hope it helps.

    sshot-2.jpg
    2835 x 1860 - 359K
    Post edited by Alessandro Mastronardi on
  • JoepingletonJoepingleton Posts: 746
    edited September 2019
    Alessandro Mastronardi said:
    Joepingleton said:
    Great renders Joe, I'm glad you like it. With the Catalyzer it's pretty easy, you just use the Diffuse Overlay: pick a color, and how much to apply. See attached screenshot... And of course if you like you can also desaturate the model texture to make it white or greyish (whixh I didn't in this case). Hope it helps.

    Thank you Alessandro, that worked great

    whiteLion01.jpg
    960 x 768 - 332K
    Post edited by Joepingleton on
  • mike_from_nzmike_from_nz Posts: 113

    Amazing product well done! Just doing a test animation using dforce (image series), each frame is taking quite a while to load the base jpg's - once loaded the frame renders in seconds. I'm asumming this is because they are very hi-res or is there a setting I may be missing?

  • mike_from_nzmike_from_nz Posts: 113

    Actually scratch that (pun intended). Going quite fast now, was just first 5 or so frames that seemed a little slow.

  • mike_from_nzmike_from_nz Posts: 113

    This was the result of a very fast test render - 18mins @ 1080p. Had to do a quick bit of learning for dforce!

  • James_HJames_H Posts: 1,034

    In my cart. I've been tempted by the Hivewire beast, but it seemed to involve buying a few products. So this scratches an itch.

  • cathan01_wwg1wgacathan01_wwg1wga Posts: 360
    Looks awesome. Can't believe I missed this release yesterday. I can combine with HW3D's lion cub to flesh out the pride. Thank you for another great looking animal.
  • SamanthieSamanthie Posts: 308

    He's beautiful AM so happy to have him. I would love to see more wild cats from you especially a cheetah. :)

  • Alessandro MastronardiAlessandro Mastronardi Posts: 2,621
    Samanthie said:

    He's beautiful AM so happy to have him. I would love to see more wild cats from you especially a cheetah. :)

    I'm glad you like it, and yes more cats will come. Next ones will be the smilodon and the lion cub, followed by lot more (also domestic cat at some point). Teaser attached...

     

    alessandro-mastronardi-smilodon-moms-love.jpg
    1920 x 2293 - 1M
  • SamanthieSamanthie Posts: 308

    Wow, he is gorgeos also and cub is cute! You are very talented AM. Looking forward to all of them. :) 

  • alexhcowleyalexhcowley Posts: 2,386

    I can't wait to get my hands on these guys. And I'm a dog person!

    Cheers,

    Alex.

  • AllenArtAllenArt Posts: 7,169
    Alessandro Mastronardi said:
    Samanthie said:

    He's beautiful AM so happy to have him. I would love to see more wild cats from you especially a cheetah. :)

    I'm glad you like it, and yes more cats will come. Next ones will be the smilodon and the lion cub, followed by lot more (also domestic cat at some point). Teaser attached...

     

    Oh wow...I'm gonna start warming up my credit card right now....

    Laurie

  • calvincwestcalvincwest Posts: 3

    Very nice work on this lion, but I do have a question on the look of the teeth, why do the teeth look like an hexagon?  Is there a way to fix them?  Thanks and keep up the great work.

Sign In or Register to comment.