Mystique for Genesis 8 Female(s) [Commercial]

124»

Comments

  • N3p3nth3N3p3nth3 Posts: 130

    This was actually a morph I thought I included but forgot to add in. I will be adding an additional morph to move the stocking closer to the heel when the heel shrinks like this. This is a focal area and I want the outfit to work with almost all character shapes. Thank you for taking the time to provide the render.

    Any chance you'll find the time to add this? It's a problem I seem to encounter quite often...

  • N3p3nth3 said:

    Had a fairly successful genesis 3 to 8 conversion that I celebrated with a Mystique render while waiting for moar.

    Very nice!

     

    mavante said:

     

    I'm utterly smitten with the promise of this product and all you're putting into it, so will be in line to buy.

    But I'm also smitten by that beautifully appropriate setting you have in this shot, with what appears to be adapted Mucha artwork. I've never seen anything like it. Is that set yours? Is it available somewhere?

    Thank you for the kind words and can't wait for its release to get it out to all of you!

    The backgorund is made up of multiple products. The artwork is from DM's Sensual Beauty, floor cloth from DM's Flirtylicious, lamp from Z Chaise Lounge, and the back curtains from LilFlame's Promo Drapes. I believe most of these, if not all, can be found at Renderosity. The antique chair is from Artstation.

  • N3p3nth3 said:

     

    Any chance you'll find the time to add this? It's a problem I seem to encounter quite often...

    Completely forgot honestly. I was going to add this in to the Mystique expansion but since it became a stand-alone product, it was never added. I don't want to leave yo0u hanging and just did it. Here's the corrective morph, just unzip the file into your daz library directory.

  • N3p3nth3N3p3nth3 Posts: 130
    N3p3nth3 said:

     

    Any chance you'll find the time to add this? It's a problem I seem to encounter quite often...

    Completely forgot honestly. I was going to add this in to the Mystique expansion but since it became a stand-alone product, it was never added. I don't want to leave yo0u hanging and just did it. Here's the corrective morph, just unzip the file into your daz library directory.

    I appreciate, not just the superior quality of your products, but also the customer service. 

    And as a reply to the question I saw you ask, I still don't think we quite have a really good elastic-strappy lingerie set with bra, full panties and thong similar to the Agent Provocateur Whitney set I mentioned back when you released Mystique 1. Whether that goes with Mystique or some other set... I don't know.

    Any chance you'll visit Ghostblade etc. (heavy metal princess?) and release micropressure morphs and similar for them?

  • N3p3nth3 said:
    N3p3nth3 said:

    I appreciate, not just the superior quality of your products, but also the customer service. 

    And as a reply to the question I saw you ask, I still don't think we quite have a really good elastic-strappy lingerie set with bra, full panties and thong similar to the Agent Provocateur Whitney set I mentioned back when you released Mystique 1. Whether that goes with Mystique or some other set... I don't know.

    Any chance you'll visit Ghostblade etc. (heavy metal princess?) and release micropressure morphs and similar for them?

    I'm working on something similiar to the Agent Provocateur Whitney set but will release on my Artstation as you can't sell something like that here at Daz. Not sure about adding the micropressure to those products.

  • Well, had a look at AP Whitney. Why should you not be able to sell this at DAZ? Everything which needs to be covered is covered and there are a lot of products which are IMO more revealing (or feature lots of revealing morphs) in the store.

    To be honest although I like Agent Provocateur in general very much the Whitney set does not appeal to me. Looks like some unfinished lingerie someone fixed with gaffer tape. There are many other sets which I would prefer to that if you get some inspiration there ;-)

  • Herschel HoffmeyerHerschel Hoffmeyer Posts: 629
    edited August 2020

    Well, had a look at AP Whitney. Why should you not be able to sell this at DAZ? Everything which needs to be covered is covered and there are a lot of products which are IMO more revealing (or feature lots of revealing morphs) in the store.

    To be honest although I like Agent Provocateur in general very much the Whitney set does not appeal to me. Looks like some unfinished lingerie someone fixed with gaffer tape. There are many other sets which I would prefer to that if you get some inspiration there ;-)

    The areas right around the nipple are exposed. Daz requires more of a safety zone around the area. Pretty buch the bottom half of the breast must be covered. No underboob can be exposed. The underwear is also riding the line on coverage and what is ok. Combine that with a ton of straps and you are flirting with something being too fetish. The top is the real deal breaker here though. I guarentee you Daz would not accept that as is. I have had Daz not approve my stuff before with less revealing items around these areas.

    Post edited by Herschel Hoffmeyer on
  • N3p3nth3N3p3nth3 Posts: 130

    Well, had a look at AP Whitney. Why should you not be able to sell this at DAZ? Everything which needs to be covered is covered and there are a lot of products which are IMO more revealing (or feature lots of revealing morphs) in the store.

    To be honest although I like Agent Provocateur in general very much the Whitney set does not appeal to me. Looks like some unfinished lingerie someone fixed with gaffer tape. There are many other sets which I would prefer to that if you get some inspiration there ;-)

    Well, there's only so many frilly things you can put on characters without it getting a bit same-y, and I find it looks unique.

    Plus the lady who almost became mrs. N3p3nth3 had a set :D

    But I appreciate the challenges involved, I'm certainly aware of the fact that these types of rules don't have to make sense, but they still have to be followed. :)

  • IvyIvy Posts: 7,165

    Good stuff . Thanks for the heel fix

    Spy vs Spy

  • mavantemavante Posts: 734

    The backgorund is made up of multiple products. The artwork is from DM's Sensual Beauty, floor cloth from DM's Flirtylicious, lamp from Z Chaise Lounge, and the back curtains from LilFlame's Promo Drapes. I believe most of these, if not all, can be found at Renderosity. The antique chair is from Artstation.

    Thanks very much for all that detailed info. You really put it all together beautifully for the promo, and I'm thrilled to see your product and its followups are such major hits! All well deserved.

  • I can't seem to apply the wrinkled stockings. I add the vintage stockings in wardrobe, then apply material wrinkled stockings but I don't see any wrinkles? 

    pose2.png
    989 x 710 - 375K
  • JVRendererJVRenderer Posts: 661
    edited February 2021

    Burlesque

    Burlesque

    Post edited by JVRenderer on
  • Burlesque

    Burlesque

    JVRenderer, amazing render! Love the bows you added to the heels, very nice touch.

     

     

    I can't seem to apply the wrinkled stockings. I add the vintage stockings in wardrobe, then apply material wrinkled stockings but I don't see any wrinkles? 

    The wrinkled material has small litlle wrinkles around the garter hook attachments to represent the tension of them being pulled.

  • Hi i love this outfit great work, i just would like to know which character was used in the product pictures.. thank you

  • HoMartHoMart Posts: 480

    116taw_bcc08a1769 said:

    Hi i love this outfit great work, i just would like to know which character was used in the product pictures.. thank you

     https://www.daz3d.com/forums/discussion/comment/5345791/#Comment_5345791

  • HoMart said:

    116taw_bcc08a1769 said:

    Hi i love this outfit great work, i just would like to know which character was used in the product pictures.. thank you

     https://www.daz3d.com/forums/discussion/comment/5345791/#Comment_5345791

    @HoMart Thank you

Sign In or Register to comment.