Loading...
> >

A harness for the DAZ Horse 2 : Who's interrested and for which carriage?

24

Comments

  • NathNath Posts: 2,809

    Definitely interested!

  • 3djoji3djoji Posts: 1,093

    DollyGirl said:

    I would like to see a horse collar and haines harness set with all the bells and whistles (Medalions/Brasses, silver plate and the like). It would take some additonal work so not this time around, but it could be Harness 2. Would like to do a Budwieser Beer Wagon or the bigger Barouche and there are some beautiful harnesses with the fan skirt that covers the backend of a horse. I can see this harness being used in Western scenes as well  Freight wagons, covered wagons, circus wagons all of the big end wagons of the 18th and 19th centuries. 

     it is a good idea to add some accessories. It is written in my work book too :-)

     

  • namffuaknamffuak Posts: 4,146

    watchdog79 said:

    'nuff said.laugh

    Edit: Alright, there are some carriages I would love to see it compatible with:

    https://www.daz3d.com/vintage-carriages-1--barouche--police-wagon

    https://www.daz3d.com/vintage-carriages-2--brougham--omnibus

    https://www.daz3d.com/vintage-carriages-3--hansom-cab

    https://www.daz3d.com/doctor-cab (oldie, but it got an Iray add-on, I think you have it on the images above)

    Pretty much what he said; you get any of these done and I'll be happy. All of them and I'll be ecstatic and you'll be my hero!

  • nonesuch00nonesuch00 Posts: 18,142
    edited December 2021

    I would like it to work with a herd of reindeer pulling a Santa sleigh. That's a lot, I'm sure what you have already is quite good. 

    Post edited by nonesuch00 on
  • 3djoji3djoji Posts: 1,093

    nonesuch00 said:

    I would like it to work with a herd of reindeer pulling a Santa sleigh. That's a lot, I'm sure what you have already is quite good. 

     As far as Tane, the Old Deer is for Daz Horse 2, I have made a morph to get the harness working with it. Then the santa sleigh should be able to fly again :-)

    Note : as far as there is also Marguerite the cow for Daz Horse 2, I don't make a morph of this harness because it is not the work harness I want for it.

  • GordigGordig Posts: 10,072

    ...so is that a "no" on the centaurs?

  • Worlds_EdgeWorlds_Edge Posts: 2,152

    I'm definitely interested and will purchase it whenever it is out. 

  • 3djoji3djoji Posts: 1,093

    Gordig said:

    ...so is that a "no" on the centaurs?

    I think this harness is not compatible with the centaure for genesis. It will be easier to design a well adapted harness for it. I put your suggestion on my list.

  • N-RArtsN-RArts Posts: 1,496
    edited December 2021

    nonesuch00 said:

    I would like it to work with a herd of reindeer pulling a Santa sleigh. That's a lot, I'm sure what you have already is quite good. 

    +1million

    I've got an idea for a render. But it's two Daz 2 horses pulling a sleigh, not reindeer.

    Post edited by N-RArts on
  • 3djoji3djoji Posts: 1,093

    N_R Arts said:

    nonesuch00 said:

    I would like it to work with a herd of reindeer pulling a Santa sleigh. That's a lot, I'm sure what you have already is quite good. 

    +1million

    I've got an idea for a render. But it's two Daz 2 horses pulling a sleigh, not reindeer.

    yes, horses can be used for the sleigh.  (note : this wip is a render, without reindeer...lol) 

    wip15.png
    1300 x 1000 - 1M
  • carrie58carrie58 Posts: 3,984

    Oh I'm interested in this and one for the Genesis 3-8 Centuars please !! thank you very much ,and while I can't be sure until it is in my "hands " ,it should be possible to make a morph for the harnessing without the bridle and reins for the Centuars ....... yeah just can't see them volunteering to have a bit in their mouths ....... but that's just me

     

  • nonesuch00nonesuch00 Posts: 18,142
    edited December 2021

    N_R Arts said:

    nonesuch00 said:

    I would like it to work with a herd of reindeer pulling a Santa sleigh. That's a lot, I'm sure what you have already is quite good. 

    +1million

    I've got an idea for a render. But it's two Daz 2 horses pulling a sleigh, not reindeer.

    I did this render in December 2016, using a product I bought at Content Paradise back when it was still in business and Poser was still owned by Smith Micro.

    This is what I'm thinking of:

    Santa & his Team

     

    Of course, on the ground pulling on roads but the bucks hitched up like horses will do as well.

    +++++

    3Djoji already answered this question so thanks very much...

    Post edited by nonesuch00 on
  • nonesuch00nonesuch00 Posts: 18,142

    3djoji said:

    nonesuch00 said:

    I would like it to work with a herd of reindeer pulling a Santa sleigh. That's a lot, I'm sure what you have already is quite good. 

     As far as Tane, the Old Deer is for Daz Horse 2, I have made a morph to get the harness working with it. Then the santa sleigh should be able to fly again :-)

    Note : as far as there is also Marguerite the cow for Daz Horse 2, I don't make a morph of this harness because it is not the work harness I want for it.

    Thanks very much!

  • cclesuecclesue Posts: 420

    The breast collar you show in the WIP image is more for light pulling (pleasure driving) such as carriages, traps, Cabs etc. but for heavier stuff you absolutely need a work collar.

  • 3djoji3djoji Posts: 1,093

    cclesue said:

    The breast collar you show in the WIP image is more for light pulling (pleasure driving) such as carriages, traps, Cabs etc. but for heavier stuff you absolutely need a work collar.

    You are right, this one is not for heavier stuff.

  • JOdelJOdel Posts: 6,286

    Oh definitely World Travels, and Boundless Journey. Both are ancient, and uselss for animations since I don't see any way that they could turn. But they make great scene dressing.

  • backgroundbackground Posts: 415

    If you do make a heavier harness, could you make a version to fit the DA Clydesdale for Daz Horse 2? A team of Clydesdales were the horse of choice if you needed to move a really heavy load.

  • 3djoji3djoji Posts: 1,093
    edited December 2021

    JOdel said:

    Both are ancient, and uselss for animations since I don't see any way that they could turn. But they make great scene dressing.

    they are so old...

    Post edited by 3djoji on
  • xyer0xyer0 Posts: 5,947

    Havos said:

    3djoji said:

    One by One : Omnibus is no problem for single horse. For more horses, 2,4 6 etc, I've to pose the beam. I will do it.

    My first thought was that an Omnibus filled with people would really need 4 horses, but looking at the historical photos of them, it seems it was almost always just the two horses, poor things!

    You might also want to consider the following:

    https://www.daz3d.com/horse-drawn-carriage-for-daz-horse-2

    https://www.daz3d.com/royal-carriages-for-millennium-horse

    https://www.daz3d.com/the-rhs-stagecoach

    https://www.daz3d.com/western-coaches

    https://www.daz3d.com/old-timer

    https://www.daz3d.com/world-travels

    I know the Horse drawn carriage already comes with a harness, but I imagine yours will be better quality.

    The US carriages probably had four horses due to the very long distances they would need to travel.

    I'm for this too. I'd prefer the RHS Stagecoach if I had to prioritise. 

  • 3djoji3djoji Posts: 1,093

    background said:

    If you do make a heavier harness, could you make a version to fit the DA Clydesdale for Daz Horse 2? A team of Clydesdales were the horse of choice if you needed to move a really heavy load.

    A "work Harness" is in the stack. And, of course, this shape is more interresting for heavier work.

  • 3djoji3djoji Posts: 1,093

    xyer0 said:

    I know the Horse drawn carriage already comes with a harness, but I imagine yours will be better quality.

    The US carriages probably had four horses due to the very long distances they would need to travel.

    The work is in Progress for that one but a quick look shows us some improvements in a scenery 

    Screenshot 2021-12-17 111132.png
    2322 x 1290 - 3M
  • xyer0xyer0 Posts: 5,947

    Thanks so much for taking on this project!

  • StoicStoic Posts: 133

    3djoji said:

    nonesuch00 said:

    I would like it to work with a herd of reindeer pulling a Santa sleigh. That's a lot, I'm sure what you have already is quite good. 

     As far as Tane, the Old Deer is for Daz Horse 2, I have made a morph to get the harness working with it. Then the santa sleigh should be able to fly again :-)

    Note : as far as there is also Marguerite the cow for Daz Horse 2, I don't make a morph of this harness because it is not the work harness I want for it.

    It would be great to see the harness for Tane working with either of these two sleighs.

    Santa's Sleigh | Daz 3D

    Wonderful Sleigh Ride | Daz 3D

  • MelissaGTMelissaGT Posts: 2,611

    If you're doing a harness (which I'd be interested in for sure), I'd love to see if you could do some good tack. Something with a breastplate and crupper...would also love to see a "non-bucket" faceplate, such as something like this - 

  • 3djoji3djoji Posts: 1,093

    Stoic said:

    It would be great to see the harness for Tane working with either of these two sleighs.

    Santa's Sleigh | Daz 3D

    Wonderful Sleigh Ride | Daz 3D

    Both are in the list of connectable carriage 

  • 3djoji3djoji Posts: 1,093

    MelissaGT said:

    If you're doing a harness (which I'd be interested in for sure), I'd love to see if you could do some good tack. Something with a breastplate and crupper...would also love to see a "non-bucket" faceplate, such as something like this - 

     

    Interresting, I add to the accessories list :-) 

  • 3djoji3djoji Posts: 1,093

    JOdel said:

    Oh definitely World Travels, and Boundless Journey. Both are ancient, and uselss for animations since I don't see any way that they could turn. But they make great scene dressing.

    I've made in the past a more complete version of the World Travels. It took me some time to find it back and some minor changes I've modeled at that time make it turn... I don't know if DAZ would be interrested to upgrade this little juwel and, by the way, get a Daz Studio Version of it.

    World Travels.png
    1300 x 1000 - 1M
  • carrie58carrie58 Posts: 3,984
    edited December 2021

    3djoji said:

    JOdel said:

    Both are ancient, and uselss for animations since I don't see any way that they could turn. But they make great scene dressing.

    they are so old...

    Careful ..... what's wrong with old? Some of the "old " stuff is still good ,just needs a little tweeking of the textures . I'm old and could really use my textures tweeked ,and I love those  Gypsy wagons ,and the one that was at HiveWire a couple of years ago ........

    ooh just saw your Worlds Travels modification niiiccceee.

    Post edited by carrie58 on
  • sfaa69sfaa69 Posts: 353

    I'd love to have a harness for the RHS Stagecoach and Western Coaches.

  • RGcincyRGcincy Posts: 2,834
    edited December 2021

    A work wagon that could use a harness: https://www.daz3d.com/suffolk-wagon

    An oldie stage coach: https://www.daz3d.com/the-rhs-stagecoach

    Post edited by RGcincy on
Sign In or Register to comment.