Loading...
> >

Buy Something That Doesn't Work in Carrara? Post your Questions and Workarounds here. (please)

1…4445464850

Comments

  • StezzaStezza Posts: 8,128
    edited September 4

    .. yes

     

    werewulfHH.png
    800 x 600 - 300K
    Post edited by Stezza on
  • therixxtherixx Posts: 125

    Stezza said:

    looks good... looking at the fur on the image you may need to untick wrapUV apply the smoothing and maybe apply the fur transmap manually yes

    Thank you @Stezza. Yes, you are right. I noticed the fur issue, but the model was working so, after wondering about this, I was very happy and wanted to confirm it. Your tips will be really valuable when I try to fix it, thank you again.
    You know, I must say that I quite like it like this as well. A friend of mine, who is an artist (painter) also said that's very cool. Maybe the not transparent fur reminds us of some frazettish illustration... :-)
    Anyway, I'll surely try to fix it following your tips!

  • StezzaStezza Posts: 8,128
    edited September 13

    Barnabus from Predatron loaded in Carrara fine after weight transfers were done however the hair seems to be a problem loading up .. maybe just a bit too dense to use though I also have trouble with the eyebrows ect... so I used a substitute hair from Gosha ( a Poser figure ).

    anyways I got him into some Mr Bobble stuff easy enough in Carrara wink

    Barnabus.png
    800 x 600 - 755K
    Post edited by Stezza on
  • Bunyip02Bunyip02 Posts: 8,704

    Stezza said:

    Barnabus from Predatron loaded in Carrara fine after weight transfers were done however the hair seems to be a problem loading up .. maybe just a bit too dense to use though I also have trouble with the eyebrows ect... so I used a substitute hair from Gosha ( a Poser figure ).

    anyways I got him into some Mr Bobble stuff easy enough in Carrara wink

    Cool, was thinking about buying him, bought Mr Bobble and some landcapes instead.

  • Bunyip02Bunyip02 Posts: 8,704
    edited September 13

    Void Prime: Dakari - https://www.daz3d.com/void-prime-dakari

    Is missing base textures for both the skin and some clothing items, lodged a get it fixed with the help desk.

    Also the open mouth morph is not working. Opened the figure in DAZ Studio, opened the mouth and saved as an obj then imported that into Carrara.

    Added shaders to the skin and bodysuit in Carrara

     

    Void Prime- Dakari 1.png
    1600 x 1200 - 1M
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,704
    edited September 13

    Sledge - https://www.daz3d.com/sledge

    Is missing base textures for both the skin and some clothing items, lodged a get it fixed with the help desk.

    Mouth morph worked on this one !

    Added shaders to the skin and armour in Carrara

    Sledge 1.png
    1600 x 1200 - 2M
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,704
    edited September 13

    Hunter-Fiend - https://www.daz3d.com/hunter-fiend

    Is missing base textures for both the skin and clothing items, lodged a get it fixed with the help desk.

    Also the abdomen morphs for the belly flaps and small arms are not working. Edit - In DAZ Studio 4.22 the poses work showing the belly flaps open, will be able to do an obj export.

    Added shaders to the skin and clothing in Carrara

     

    Hunter-Fiend 1.png
    1600 x 1200 - 2M
    Hunter-Fiend 2.png
    1913 x 1036 - 358K
    Post edited by Bunyip02 on
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,302
    edited September 13

    good luck with that Bunyip02, I am still waiting for missing textures from a V4 set I bought

    Post edited by WendyLuvsCatz on
  • Bunyip02Bunyip02 Posts: 8,704
    edited September 13

    WendyLuvsCatz said:

    good luck with that Bunyip02, I am still waiting for missing textures from a V4 set I bought

    I hope they can update the sets. I bought 15 Sixus1M items, so far everyone I have opened has been missing the base/skin textures .....

    EDIT - Yay - one that worked !!!

    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,704
    edited September 13

    Arrrggghhh - another one .....

    S1M: Reptilez - https://www.daz3d.com/s1m-reptilez

    Is missing base textures for the skin except for the eyes, lodged a get it fixed with the help desk.

    Also extreme poses are causing distortion in the limbs, poser rigging.

    Added shaders to the skin in Carrara

    S1M Reptilez 1.png
    1600 x 1200 - 3M
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,704
    edited September 13

    And another one ....

    S1M Mythos: Gug - https://www.daz3d.com/s1m-mythos-gug

    Is missing base textures for the skin and hair, lodged a get it fixed with the help desk.

    Morphs for the mouth and tongue don't work in Carrara.

    Added shaders to the skin in Carrara

    S1M Mythos- Gug 1.png
    1600 x 1200 - 2M
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,704
    edited September 13

    And this one tops the cake .....

    Nosferocious - https://www.daz3d.com/nosferocious

    Is missing the original figure with only the clothing items included in the obj/cr2 files.

    Nosferocious missing files.png
    1737 x 1034 - 236K
    Post edited by Bunyip02 on
  • Richard HaseltineRichard Haseltine Posts: 101,430

    We will report these.

  • Bunyip02Bunyip02 Posts: 8,704

    Richard Haseltine said:

    We will report these.

    Thanks Richard !

    I have asked for them to be updated via the Help Center.

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,302

    Bunyip02 said:

    Richard Haseltine said:

    We will report these.

    Thanks Richard !

    I have asked for them to be updated via the Help Center.

    can you add https://www.daz3d.com/wildwood too which is missing it's textures and I reported to the help desk a couple months ago? cheeky

    I paid little enough and it was in a mixed order with things triggering other things so did not bother bugging the PA about it though considered it

  • Richard HaseltineRichard Haseltine Posts: 101,430

    Bunyip02 said:

    Richard Haseltine said:

    We will report these.

    Thanks Richard !

    I have asked for them to be updated via the Help Center.

    Please check for updates now, they have been reuploaded.

  • Bunyip02Bunyip02 Posts: 8,704
    edited September 13

    Richard Haseltine said:

    Bunyip02 said:

    Richard Haseltine said:

    We will report these.

    Thanks Richard !

    I have asked for them to be updated via the Help Center.

    Please check for updates now, they have been reuploaded.

    Thanks again Richard !

    Only two in the list, and they are both working now, trust that the others will get fixed as well !

    S1M DIM 1.png
    798 x 1015 - 117K
    S1M DIM 2 update.png
    2708 x 1038 - 647K
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,704

    WendyLuvsCatz said:

    Bunyip02 said:

    Richard Haseltine said:

    We will report these.

    Thanks Richard !

    I have asked for them to be updated via the Help Center.

    can you add https://www.daz3d.com/wildwood too which is missing it's textures and I reported to the help desk a couple months ago? cheeky

    I paid little enough and it was in a mixed order with things triggering other things so did not bother bugging the PA about it though considered it

    Hope they get Wildwood fixed too Wendy !

  • therixxtherixx Posts: 125
    edited September 13

    I had the Nele
    https://www.daz3d.com/nele
    download broken.
    In a couple of tickets I asked to fix it, and in the end they managed to do it (I do not know how long it took because I did not get a warning when they did it). So, keep the faith, @Wendy ;-)

    Post edited by therixx on
  • Richard HaseltineRichard Haseltine Posts: 101,430

    Sorry, I hadn't noticed the previous reports - I think I read them as renders. I will add them in now, but it will probably be enxt week now before they are fixed.

  • Bunyip02Bunyip02 Posts: 8,704

    Richard Haseltine said:

    Sorry, I hadn't noticed the previous reports - I think I read them as renders. I will add them in now, but it will probably be enxt week now before they are fixed.

    Thanks again Richard !

  • Richard HaseltineRichard Haseltine Posts: 101,430

    We beleive all of these have now been corrected.

  • Bunyip02Bunyip02 Posts: 8,704
    edited September 16

    Richard Haseltine said:

    We beleive all of these have now been corrected.

    Thanks once more Richard. Downloaded and working well !!!

    Dakari Hunter-Fiend 1.png
    2654 x 1038 - 519K
    Reptilez Sledge 1.png
    2672 x 1036 - 681K
    Post edited by Bunyip02 on
  • Bunyip02Bunyip02 Posts: 8,704
    edited September 16

    That leaves one to go, reported over a month ago.

    A7D/E Corsair II (for Poser) - https://www.daz3d.com/a7d-e-corsair-ii-for-poser

    When the files were downloaded they were for the A62M Seishin-Kaze ....

    A7DE Corsair error 1b.png
    798 x 1009 - 151K
    Post edited by Bunyip02 on
  • Richard HaseltineRichard Haseltine Posts: 101,430

    Bunyip02 said:

    That leaves one to go, reported over a month ago.

    A7D/E Corsair II (for Poser) - https://www.daz3d.com/a7d-e-corsair-ii-for-poser

    When the files were downloaded they were for the A62M Seishin-Kaze ....

    Thanks, not sure if that was reported or not so I have sent it in as new.

  • Bunyip02Bunyip02 Posts: 8,704
    edited September 17

    Richard Haseltine said:

    Bunyip02 said:

    That leaves one to go, reported over a month ago.

    A7D/E Corsair II (for Poser) - https://www.daz3d.com/a7d-e-corsair-ii-for-poser

    When the files were downloaded they were for the A62M Seishin-Kaze ....

    Thanks, not sure if that was reported or not so I have sent it in as new.

    Thanks Richard !

    EDIT - Just checked my DIM and it was waiting to be downloaded. Checked it after downloading and it's the right aircraft this time !!!

    Post edited by Bunyip02 on
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,302

    YES!!!

    ThankYou Richard Haseltine

    will try and get a Carrara render done later today yes

    Capture.PNG
    775 x 963 - 105K
  • Bunyip02Bunyip02 Posts: 8,704

    WendyLuvsCatz said:

    YES!!!

    ThankYou Richard Haseltine

    will try and get a Carrara render done later today yes

    smileyyes

  • Richard HaseltineRichard Haseltine Posts: 101,430

    Glad they are working, and sorry it took a while to get them flagged up.

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,302
    edited September 26

     

    bit late but a short video, I accidently hid the skirt leaves

    is Autofitted to Stephanie 5 curvy, yes pokethrough too blush

    Post edited by WendyLuvsCatz on
Sign In or Register to comment.