Loading...
> >

Never Let Ledhead Name a Complaint Thread Complaint Thread

13567…50

Comments

  • MistaraMistara Posts: 38,675
    edited December 1969

    tjohn said:
    Kyoto Kid said:
    ...well forty five minutes an s seven failed upload attempts later finally got my RRRR submission to post.


    My brain hurts.


    Dr. Gumby says, "It will have to come out! Nurse! Nurse! Nurse!"


    7 upload tempts - one way to get a booboo on upload clicky finger.

  • MistaraMistara Posts: 38,675
    edited December 1969

    Good Mornin amigos Complainers :)

    untitled7.png
    300 x 300 - 164K
    untitled9.png
    300 x 300 - 156K
  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Misty Whisky said:
    ps1borg said:
    Iron Lacework so easy when the polyflow and UVs are solid


    pretty laceworks
    Starting to look a little like the houses in my 'hood, kinda faux Victorian

    ss.jpg
    726 x 638 - 81K
  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Misty Whisky said:
    Good Mornin amigos Complainers :)

    Nearly midnight Saturday here, and cold - autumn weather is definitely here :lol:

  • MistaraMistara Posts: 38,675
    edited December 1969

    is chilly here too.

    wanting pancakes for breakfast. they won't make themselves. don't wanna climb out from warm blankets. is a dilemma

    slow internet today. should run spybot in case it's only my netbook is slow

  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Gu8ess is one of those times where summer packed its bags and headed north, but hasn't quite got to you yet :)

  • MistaraMistara Posts: 38,675
    edited April 2013

    oh dear

    seems a lot of spying going on here


    oh woww eyes can sees smiley faces again. oh noes smileys disappeared again - foxtrot uniform delta gulf echo

    ohdear.jpg
    1024 x 600 - 215K
    Post edited by Mistara on
  • MistaraMistara Posts: 38,675
    edited December 1969

    Maman Brijit looks sooo kewl!

  • MistaraMistara Posts: 38,675
    edited December 1969

    'plaint - sorting by purchase date resets itself when i click on my new purchase to d/l

    no file type explanation mac vs pc - lucky not all zip files yet

  • ps1borgps1borg Posts: 12,776
    edited April 2013

    I see smileys :) Can't you block third party cookies? I got a short blockscript blacklist can PM if you want :) The Wire is on TV, last ep series 1

    Post edited by ps1borg on
  • MistaraMistara Posts: 38,675
    edited December 1969

    when i was a youngin, there was no tv programming in the middle of the night, it was only snow static.


    we were singin byyye byyye the dayyy the analog died

  • starionwolfstarionwolf Posts: 3,670
    edited December 1969

    yay, new thread.

    The wind is blowing this morning like it has been all week.

    Thanks for posting the link to the old thread. I forgot to bookmark the page where Kyoto Kid talked about Milwaukee, WI.

    I went to a museum and saw an old radio with vacuum tubes in a wooden cabinet. It had an analog dial or two. One dial controls the tuner while the other dial controls the volume.

  • MistaraMistara Posts: 38,675
    edited December 1969

    yep, dials to change the channel. :)


    tee hee Dark lord approved http://www.amazon.com/gp/product/0142407224

  • DanaTADanaTA Posts: 13,207
    edited December 1969

    Misty Whisky said:
    Jaderail said:
    I've been clean of hard liquor for 16 years now. The Hard stuff is my demon. I was shocked when my Doc suggested two beers a day to help my kidneys keep flushing fluids. I'll never doubt what a Doctor says again.

    NOTE to others with kidney issues: ONLY do this if told too!!


    panic panic, last night only had 2 beers left in the fridge, today only haz one - one is the loneliest number

    Two can be as bad as one...

    Dana

  • DanaTADanaTA Posts: 13,207
    edited December 1969

    ps1borg said:
    Misty Whisky said:
    ps1borg said:
    Iron Lacework so easy when the polyflow and UVs are solid


    pretty laceworks


    Starting to look a little like the houses in my 'hood, kinda faux Victorian

    Looking good!

    Dana

  • DanaTADanaTA Posts: 13,207
    edited December 1969

    Misty Whisky said:
    'plaint - sorting by purchase date resets itself when i click on my new purchase to d/l

    no file type explanation mac vs pc - lucky not all zip files yet

    As I explained to KK, if there is a DIM icon, you can download that one with the download button and it works in Windows. If it is just a zip, that is a Mac file.

    Dana

  • DanaTADanaTA Posts: 13,207
    edited December 1969

    starionwolf said:
    yay, new thread.

    The wind is blowing this morning like it has been all week.

    Thanks for posting the link to the old thread. I forgot to bookmark the page where Kyoto Kid talked about Milwaukee, WI.

    I went to a museum and saw an old radio with vacuum tubes in a wooden cabinet. It had an analog dial or two. One dial controls the tuner while the other dial controls the volume.

    They still make things with tubes...the preferred guitar amps have tubes. Most guitarists prefer the sound of tubes. I have one, a Mesa Boogie Rocket 44.

    But I remember radios with tubes. Although the wooden ones were either very old or very expensive. We had one with the BakeLite plastic when I was a kid. And the TVs all had tubes. They would all get quite warm after being on for a little while.

    Dana

  • TJohnTJohn Posts: 11,095
    edited December 1969

    ps1borg said:
    Misty Whisky said:
    ps1borg said:
    Iron Lacework so easy when the polyflow and UVs are solid


    pretty laceworks


    Starting to look a little like the houses in my 'hood, kinda faux Victorian
    Fun living in hovering house. :)
  • TJohnTJohn Posts: 11,095
    edited December 1969

    Misty Whisky said:
    oh dear

    seems a lot of spying going on here


    oh woww eyes can sees smiley faces again. oh noes smileys disappeared again - foxtrot uniform delta gulf echo


    Tracking cookies no taste good. :-P
  • SkirikiSkiriki Posts: 4,975
    edited December 1969

    COMPLAINT!

    I have forgotten how to make a morph's morph.

    I made a morph. Let's call it Blob A&B, because it is kinda like that, two blobs.

    Blob A&B is quite happy to get dialed in, and works a-OK. Great!

    Now, I want to do a bit of tweaking to A part of the blobs, so off to Hexagon I went with the Figure, that had Blob A&B dialed in, so I can do my nefarious things to blob A's side. I send back to DAZ Studio, and... WTFBBQ. I can't keep morph Blob A&B dialed, cause the new morph intended to morph part A would distort everything -- not just alter A -- to heck and back. But if I dial just Tweak for Blob A in, it all works OK and this is not what I intended, 'cause I want just A to protrude more, because my plan is to make same kind of morph for Blob B and have people dial in whatever they like on top of existing baseline Blob A&B.

    HOW do I make a morph's morph? I HAVE FORGOTTEN! I tried all those Delta[Whatever] options and linking it with Blob A&B morph and gah.

    By the way, here's a phrase I did not expect to enter into Google Image Search today: mare mammaries

    It was that kind of day, yeah...

  • Richard HaseltineRichard Haseltine Posts: 100,774
    edited December 1969

    If you want the new morph to modify the existing morphs, then you need to have reverse deformations checked.

  • SkirikiSkiriki Posts: 4,975
    edited April 2013

    OMG!

    *runs to test*

    Edit: IT WORKED! HOORAY! We're going to get freebie horse tits!

    Post edited by Skiriki on
  • MistaraMistara Posts: 38,675
    edited December 1969

    DanaTA said:
    Misty Whisky said:
    'plaint - sorting by purchase date resets itself when i click on my new purchase to d/l

    no file type explanation mac vs pc - lucky not all zip files yet

    As I explained to KK, if there is a DIM icon, you can download that one with the download button and it works in Windows. If it is just a zip, that is a Mac file.

    Dana


    is that what it is?

    saw it but made a mousy detour 'round that dim dodgy looking downloady button to the dpc.exe file.

  • JaderailJaderail Posts: 0
    edited April 2013

    Skiriki said:
    OMG!

    *runs to test*

    Edit: IT WORKED! HOORAY! We're going to get freebie horse tits!

    I'll have mine broiled with Butter sauce and a garden salad please.
    Post edited by Jaderail on
  • SkirikiSkiriki Posts: 4,975
    edited April 2013

    COMPLAINT: New trouble!

    Just how the heck do I mirror this damn morph!?

    Edit: Wait, found Tofusan's mirror script. Crisis yet again averted.

    Post edited by Skiriki on
  • kyoto kidkyoto kid Posts: 41,036
    edited December 1969

    ...once again was timed out and force to sign in.

    ...once again taken to Store not Forum Login page.

    ...once again sent to my account page instead of back to the thread after signing back in thus losing my place.

    339 days since "M-Day" and still the timeout/sign in issues haven't been worked out.

  • ChoholeChohole Posts: 33,604
    edited December 1969

    but only for you, you seem to have a rather unique problem.

  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Morning. Sunny here after yesterday's stormy bits yay :)

  • ps1borgps1borg Posts: 12,776
    edited December 1969

    chohole said:
    but only for you, you seem to have a rather unique problem.

    Login from forum pages returns a URL with a leading "." In the string (fully unqualified domain :lol:?) for the past few weeks or so, no big deal for me cos Safari just spits it out but...

  • TJohnTJohn Posts: 11,095
    edited December 1969

    Kyoto Kid said:
    ...once again was timed out and force to sign in.

    ...once again taken to Store not Forum Login page.

    ...once again sent to my account page instead of back to the thread after signing back in thus losing my place.

    339 days since "M-Day" and still the timeout/sign in issues haven't been worked out.


    Compukitteh fix it for you. :)
    funny-pictures-kitten-presses-ctrl-alt-grr.jpg
    400 x 371 - 26K
This discussion has been closed.