Star Trek Builders Unite 8: THE REBOOT

1293032343563

Comments

  • DodgerDodger Posts: 304

    Setalia said:

    I apologize for the bother.

    No worries. I just want to make sure people aren't misconstruing what I'm doing here. 

    I will certainly do some female ones based on my Elizabeth 2 figure.

     

    I mean, you can always use an HDRI position map to transfer morph data to another figure. All you'd have to do is project the UV map from one to another. Easy peasy, except that I haven't released that technology yet because I'm frankly not sure how to present such an app.

  • DodgerDodger Posts: 304
    edited June 2021

    A few more.

    Identification list:

    Llort, Babylon 5; Mitch Mc... I mean, err... Lugal-Irra-Kush, Doctor Who; Lurian, Star Trek; Magog, Andromeda; Mak'Tar, Galaxy Quest (metafictional); Mangalore, The Fifth Element; Mank'Nar, Galaxy Quest (metafictional); Marshman, Doctor Who; and uh... someone said I should be sure to make a Martian and I was like "which kind of Martian? There are a tonne!" and they were like "any Martian, doesn't matter." So...

    LlortZ01.jpg
    719 x 1164 - 229K
    Lugal-irra-kushZ01.jpg
    752 x 1166 - 200K
    LurianZ01.jpg
    752 x 1166 - 198K
    MagogZ01.jpg
    971 x 1176 - 308K
    Mak'TarZ01.jpg
    880 x 1169 - 276K
    MangaloreZ01.jpg
    1013 x 1181 - 273K
    Mank'NarZ01.jpg
    911 x 1181 - 258K
    MarshmanZ01.jpg
    911 x 1181 - 299K
    MartianLTZ01.jpg
    894 x 1207 - 225K
    Post edited by Dodger on
  • SetaliaSetalia Posts: 49

    Mitch...

    I'm dying now. XD

  • DodgerDodger Posts: 304

    Eh, may as well make a few more tonight.

     

    Identification list:

    Menoptera, Doctor Who; Minbari, Babylon 5; Nestor, Battle Beyond the Stars; Nightsider, Andromeda; Ogron, Doctor Who; Pan-Babylonian, Doctor Who; Pau'an, Star Wars; Remulakian, Coneheads

    MenopteraZ01.jpg
    912 x 1205 - 361K
    MinbariZ01.jpg
    847 x 1206 - 248K
    NestorZ01.jpg
    878 x 1209 - 258K
    NightsiderZ01.jpg
    902 x 1210 - 248K
    OgronZ01.jpg
    902 x 1210 - 205K
    Pan-BabylonianZ01.jpg
    897 x 1206 - 229K
    Pau'an.jpg
    749 x 1210 - 227K
    RemulakianZ01.jpg
    657 x 1206 - 159K
  • randym77randym77 Posts: 275

    Hahahahaha! The Martian!!!!  laugh

  • I would've just used the transfer utility to transfer the morphs and then use the geometry editor to remove stuff I didnt need or stuff got messed up.

  • SetaliaSetalia Posts: 49

    I bought the Lunar Guard Outfit (G3F) this morning. Now I'm attempting to add the Star Trek uniforms to it, but I'm not sure how to do it. The only files in the ST download are jpg images.

  • CricketCricket Posts: 451

    Setalia said:

    I bought the Lunar Guard Outfit (G3F) this morning. Now I'm attempting to add the Star Trek uniforms to it, but I'm not sure how to do it. The only files in the ST download are jpg images.

    You should just be able to load the bodysuit, and then under "surfaces" add the jpgs to the diffuse and opacity channels. 

  • SetaliaSetalia Posts: 49

    Could you show a screenshot of those channels? I'm not seeing them.

  • Calling out to the great hive mind for some help here. The images below come from a ship design I did for my comic. The design was inspired by some Star Trek concept art that I saw somewhere several years ago. My problem is that I would like to update the look since my skills have improved since last I did the design. My problem is that I can't seem to find the concept art that inspired it. I'm thinking it was a Matt Jefferies concept but I can't seem to find it anywhere. I either saw it in a book or a blog. I'm mainly interested in the primary hull (hammerhead). Any help greatly appreciated. Thanks!

    primary hull side view01.jpg
    283 x 487 - 73K
    primary-hull-04.jpg
    2100 x 1500 - 289K
  • DodgerDodger Posts: 304

    GRFK DSGN Unlimited said:

    I would've just used the transfer utility to transfer the morphs and then use the geometry editor to remove stuff I didnt need or stuff got messed up.

    No. That use of my creations is not permitted.

  • It was only a suggestion. And according to you, it's not possible anyway.

  • randym77randym77 Posts: 275

    GRFK DSGN Unlimited said:

    Calling out to the great hive mind for some help here. The images below come from a ship design I did for my comic. The design was inspired by some Star Trek concept art that I saw somewhere several years ago. My problem is that I would like to update the look since my skills have improved since last I did the design. My problem is that I can't seem to find the concept art that inspired it. I'm thinking it was a Matt Jefferies concept but I can't seem to find it anywhere. I either saw it in a book or a blog. I'm mainly interested in the primary hull (hammerhead). Any help greatly appreciated. Thanks!

    I don't remember seeing anything quite like that. Star Wars has hammerhead cruisers, though without that ring in back.

    If you're sure it's Trek, maybe there's something on that "Ships of the Line" poster that will help:

    https://64.media.tumblr.com/a15d0c767642d489fad7032bcf5ccb6c/39a9ae0a84804850-b4/s1280x1920/8d698ea41df7899baac524fe0306e6de31560394.jpg

  • I'm quite sure it was Star Trek-related as I tend to collect a lot of ST magazines and books. I used to follow a blog by Jefferies I think and it listed some of the concepts he had but never went forward. So I doubt it would be on that ships of the line poster.

  • randym77randym77 Posts: 275

    A lot of Jefferies' unused designs ended up being used later, for alien ships, future ships, historical ships, etc. One of his concepts for the Enterprise was based on a manta ray; it was later used as a Klingon ship. If it was posted on his blog, though, it's probably gone, since he died almost 20 years ago.

    Your best bet might be TrekCore. They have a gallery of Matt Jefferies concept sketches. I didn't look through all of them; there are over 300.

    https://www.trekcore.com/specials/thumbnails.php?album=3

  • Thanks. That helped eliminate Jefferies as the artist to the concept. Now I just need to figure out who actually did it. 

  • TimbalesTimbales Posts: 2,330

    Calling out to the great hive mind for some help here. The images below come from a ship design I did for my comic. The design was inspired by some Star Trek concept art that I saw somewhere several years ago. My problem is that I would like to update the look since my skills have improved since last I did the design. My problem is that I can't seem to find the concept art that inspired it. I'm thinking it was a Matt Jefferies concept but I can't seem to find it anywhere. I either saw it in a book or a blog. I'm mainly interested in the primary hull (hammerhead). Any help greatly appreciated. Thanks!

    I can see where this could have been inspired by the USS Enterprise XCV 330. https://www.thevintagenews.com/wp-content/uploads/2016/02/Enterprise_XCV-330-1.jpg
  • Took me long enough but I finally found it. It was a John Eaves design that was on his "Eavesdropping" blog from May of 2009. I could've sworn I saved the image somewhere. Here it is. Now to figure out how to recreate it.

    https://johneaves.wordpress.com/2009/05/05/the-crazy-ships-of-catwalk-38/

    cw-1.jpg
    1308 x 1064 - 624K
  • DodgerDodger Posts: 304

    A few more.

    ID List: Retepsian, The Orville; Reman, Star Trek; Romulan (northern), Star Trek; Romulan (southern) and Vulcan, Star Trek; Saurian, Star Trek; Scarran (ruling caste), Farscape; Sensorite, Doctor Who; Silurian (type 1), Doctor Who; Silurian (type 2), Doctor Who; Sycorax, Doctor Who; Talaxian, Star Trek; Talosian (TOS), Star Trek; Talosian (Discovery), Star Trek; Tellarite (hybrid of TOS and Ent with room for Discovery tusks to grow through too), Star Trek; Tenctonese, Alien Nation; Fascinator (AKA They), They Live!; Togruta, Star Wars; Umbrite, Andromeda; Unas, Stargate; Vorta, Star Trek; Vree, Babylon 5; Wookiee, Star Wars; Wraith, Stargate; Xelayan, The Orville; Zabrak, Star Wars; Dann's Species, The Orville; Grig's Species, The Last Starfighter; Mog, Spaceballs

    RetepsianZ01.jpg
    769 x 1209 - 263K
    RemanZ01.jpg
    857 x 1213 - 257K
    Romulan-NorthernZ01.jpg
    857 x 1213 - 234K
    RomulanVulcanZ01.jpg
    857 x 1213 - 235K
    SaurianZ01.jpg
    834 x 1208 - 221K
    ScarranZ01.jpg
    841 x 1216 - 230K
    SensoriteZ01.jpg
    847 x 1221 - 214K
    SilurianType1Z01.jpg
    940 x 1222 - 290K
    SilurianType2Z01.jpg
    847 x 1221 - 293K
    SycoraxZ01.jpg
    940 x 1222 - 273K
    TalaxianZ01.jpg
    940 x 1222 - 306K
    TalosianTOSZ01.jpg
    940 x 1222 - 248K
    TalosianDiscoZ01.jpg
    940 x 1222 - 233K
    TellariteZ01.jpg
    940 x 1222 - 432K
    TenctoneseZ01.jpg
    886 x 1232 - 279K
    FascinatorZ01.jpg
    886 x 1233 - 241K
    TogrutaZ01.jpg
    886 x 1233 - 301K
    UmbriteZ01.jpg
    967 x 1230 - 231K
    UnasZ01.jpg
    905 x 1191 - 233K
    VortaZ01.jpg
    905 x 1191 - 253K
    VreeZ01.jpg
    905 x 1191 - 225K
    WookieeZ01.jpg
    902 x 1195 - 298K
    WraithZ01.jpg
    930 x 1197 - 250K
    XelayanZ01.jpg
    939 x 1206 - 260K
    ZabrakZ01.jpg
    841 x 1164 - 228K
    DannsSpeciesZ01.jpg
    872 x 1175 - 256K
    GrigsSpeciesZ01.jpg
    872 x 1175 - 214K
    MogZ01.jpg
    1017 x 1201 - 344K
  • randym77randym77 Posts: 275

    Those are incredible! It's Neelix! And a Talosian. And a Tellerite. And Mog... yes

  • Ryuu@AMcCFRyuu@AMcCF Posts: 668
    edited June 2021

    Dodger, those are unbelievably awesome!! laugh

    I got your Edosian and am eagerly awaiting the Caitian and the rest of these guys to appear in your account at ShareCG.

    BTW, are there any plans to do Aurelian/Skorr and/or Vedala figures also from TAS?

    Post edited by Ryuu@AMcCF on
  • FleetAdmiral01FleetAdmiral01 Posts: 111
    edited June 2021

    Slowly been porting all the 'Trek models I've scored over the past few months to G8. Here's a look at the Picard model I scored last week or so and a couple of Klingons. The source of the models was Scopely Games. 

     

    For the record it's a trend that has been on the rise over the last year or so. Several people in my circle have been using a retopology software called Wrap3 to convert game characters to the G8 figure. I mainly decided to focus my efforts on the Star Trek characters since the others were doing Star Wars.

    Kirk and Picard Test Render.png
    1920 x 1080 - 4M
    Kirk Captured by Klingons.jpg
    1920 x 1080 - 337K
    Post edited by FleetAdmiral01 on
  • GordigGordig Posts: 10,034

    The Klingon on the left looks like Jon Brion. 

  • I think the ingame model's name has him listed as W'Tolen. But most of the Klingons are based on Klingons we've seen (despite being Kelvin Timeline) so. At present I have, Kruge, Gorkon, Krass, Chang and Azetubr.

  • xialiubeixialiubei Posts: 71

    FleetAdmiral01 said:

    Slowly been porting all the 'Trek models I've scored over the past few months to G8. Here's a look at the Picard model I scored last week or so and a couple of Klingons. The source of the models was Scopely Games. 

     

    For the record it's a trend that has been on the rise over the last year or so. Several people in my circle have been using a retopology software called Wrap3 to convert game characters to the G8 figure. I mainly decided to focus my efforts on the Star Trek characters since the others were doing Star Wars.

    Man, those look great.

  • A couple more conversions. 

    Commander_Tiaru_Jarok_Imperial.png
    1920 x 1536 - 1M
    Klingon_General_G8M.png
    1920 x 1536 - 1M
    Star_Trek_Discovery_Pike_MK2.png
    1920 x 1536 - 1M
    Klingon_Male_2021_1.png
    1920 x 1536 - 2M
  • BendinggrassBendinggrass Posts: 1,371

    FleetAdmiral01 said:

    Someone said my attempt at using FaceTransfer to make Ansont Mount's Pike made him look more like Bruce Boxleitner well then. Here's Bruce Boxleitner as Pike. The base model I refered to to make the morph was from Tron Evolution.

    It would be great to see the original Pike, Jeffrey Hunter.

  • JoltrastJoltrast Posts: 199

    Dodger said:

    OK here's the Kelvin Klingon. Needs the base 3D&D Klingon to use (but that's also free on ShareCG)

    https://sharecg.com/v/97712/view/11/Poser/Kelvin-Klingon

    That's three out of four "subspecies".

    I've looked everywhere for the 3D&D Klingon on ShareGC, but have come up empty handed. Was it taken down? Thanks!

  • JoltrastJoltrast Posts: 199

    FleetAdmiral01 said:

    For the record it's a trend that has been on the rise over the last year or so. Several people in my circle have been using a retopology software called Wrap3 to convert game characters to the G8 figure. I mainly decided to focus my efforts on the Star Trek characters since the others were doing Star Wars.

    Yes, I've just discovered Wrap3 models this week. I only know you and one other using it though. Is it difficult to learn? Do you need to own the game you're aquiring the models from? (I assume so). I'd love to have a go at it myself!

  • RedfernRedfern Posts: 1,598

    Joltrast said:

    Dodger said:

    OK here's the Kelvin Klingon. Needs the base 3D&D Klingon to use (but that's also free on ShareCG)

    https://sharecg.com/v/97712/view/11/Poser/Kelvin-Klingon

    That's three out of four "subspecies".

    I've looked everywhere for the 3D&D Klingon on ShareGC, but have come up empty handed. Was it taken down? Thanks!

    https://sharecg.com/v/94836/gallery/11/Poser/Klingon

Sign In or Register to comment.