Loading...
> >

Carrara Challenge 45: Extinction and De-extinction! Less than two days to go!

1…4567810»

Comments

  • HeadwaxHeadwax Posts: 9,987

    thanks much better than my poor attempt :)

  • AlbertoAlberto Posts: 1,436
    Diomede_Carrara said:

    @Alberto - Eradicating diseases - that is a great interpretation of the theme.  Excellent modeling.  

    Headwax_Carrara said:

    wow Alberto that's wonderful and left field!! (lateral thinking)

    Thank you, Diomede and Headwax!

    I added two figures, Genesis 2 male (a little boy) and female (the nurse).

    The idea is to focus in the vaccination itself:

    I used dynamic hair for the hair and the eyebrows.

    Although it could be much easier to use metaballs in this case, I used Fluidos wink (well, this way I can find bugs and other issues in Fluidos)

    ExtintionScene.jpg
    1149 x 784 - 167K
    ExtintionScenecam4.jpg
    1152 x 791 - 173K
  • HeadwaxHeadwax Posts: 9,987

    pretty brilliant, once you get that lighting happening it will sing - great to use Fluidos :)

  • Bunyip02Bunyip02 Posts: 8,585

    Looking great so far Alberto !

  • ed3Ded3D Posts: 2,180

    _Well, don't suppose to be done _ in time _Alright then

  • HeadwaxHeadwax Posts: 9,987

    sorry about that ed3D - always look forward to seeing your work!

  • DesertDudeDesertDude Posts: 1,235
    edited March 2019

    Deadline tomorrow night...hoping to make it...still working here...

     

     

     

     

     

    wip_002.jpg
    1290 x 1000 - 102K
    assembly_room_002.jpg
    1487 x 1009 - 153K
    Post edited by DesertDude on
  • HeadwaxHeadwax Posts: 9,987

    looks terrific as it is DesertDude 

    I'll be off line for two weeks I am sorry.

    Officially handing over the reigns to DIOMEDE!!

     

    TA DAH.

    Thanks very much for stepping in Ted.

    It's been a terrific challenge looking forward to seeing the votes when I get back on line.

    regards

    from oz :)

     

     

     

  • AlbertoAlberto Posts: 1,436

    This is the crude rendered version.

    As I used multipass rendering, after postwork:

    Headwax_Carrara said:

    pretty brilliant, once you get that lighting happening it will sing - great to use Fluidos :)

     

    Bunyip02_Carrara said:

    Looking great so far Alberto !

    Thank you!

    extintion_GI_con4Crude.png
    1080 x 810 - 909K
    extintion_GI_con4.png
    1080 x 810 - 979K
  • DiomedeDiomede Posts: 15,165

    Extension.

    minor.

     For those of you you rushing for the deadline, please note that the effective deadline is extended 8 hours to 8am Daz Utah time on Sunday, March 24th morning.  That is when I will have woken up, had some coffee, and have started my day.   I don’t feel like staying up late just to close the thread, and I assume no one will mind the minor extension.  

     

    Love the progress, Alberto and DesertDude 

  • ed3Ded3D Posts: 2,180
    Headwax_Carrara said:

    sorry about that ed3D - always look forward to seeing your work!

    _well, thanks then_``~...

  • DiomedeDiomede Posts: 15,165
    ed3D said:
    Headwax_Carrara said:

    sorry about that ed3D - always look forward to seeing your work!

    _well, thanks then_``~...

    I take it an extra 8 hours won't make the difference?

    Hopefully, another time soon.

     

  • shlomi laszloshlomi laszlo Posts: 250
    Headwax_Carrara said:
    shlomi laszlo said:

    the dry bones.

    this is the render.

    i enlarged it and used filter forge's oil and pointalism,

    multiple sizes.

    then back to pd howler to adjust and merge them.

     

    superb piecce of work there shlomi

     

    headwax i liked your #44 challenge entry #12 skeleton rampage.

    and wanted the same look. so:

    a terrain with mainly a terrace filter, and a bit of higher island in the low part for the muscle m4. 

    3 surface replicators;

    m4 skeleton on the low flat parts, below the island.

    muscle maps m4 on the higher flat parts.

    and a group of fire plus bulb on the low flat parts.

    and a volumetric clouds.

     

     

  • UnifiedBrainUnifiedBrain Posts: 3,588
    edited March 2019

    Resurrection of Victoria One

    This is my second time to use V1 in a Challenge, so I guess this makes the resurrection official. smiley

    However, I discovered that this version of V1 (which comes in the Mimic Lite package) is not the "full" V1, but rather a low-res NG version.  Still, it works for me.

    The people are V1 and M3.  Shirt is M3 everyday wear.  Goggles come from B25 Steampunk Aviator.  The set is The Mad Lab, with some alterations and additions in the model room.  Carrara processes include, aura and text.   GMIC was used, as always.  No postwork.

    Resurrection of Victoria One.png
    1100 x 1362 - 2M
    Resurrection Carrara setup.JPG
    698 x 888 - 108K
    Post edited by UnifiedBrain on
  • DesertDudeDesertDude Posts: 1,235
    edited March 2019

    This is as much as I could get done for this image. Pretty simple modelingfor the most part - just some boxes and cylinders made in the Vertex Room, textured and assembled together. The two main robots have IK chains for their arms. A few of the objects have Aura enabled under the Effects Tab. The one industrial robot arm has a Bulb attached with some Light Effects turned on: CrossScreen, Glow and Stars. Industrial robot arms are textured with Anodized Aluminum from Carrara native content. I rendered the background robots serperate from the foreground and added a subtle Curves filter to each in post.

    Thanks Headwax and Diomede for hosting the challenge!

     

    final_002.jpg
    1290 x 1000 - 573K
    welding.jpg
    645 x 500 - 10K
    Post edited by DesertDude on
  • Bunyip02Bunyip02 Posts: 8,585

    Alberto - final render looks superb

    UB - very nicely placed straps on Vicky - looking good

    DesertDude - love the Toon look, hope that leg's mending well

  • DiomedeDiomede Posts: 15,165
    edited March 2019

    Some great last minute additons!

    UB - that V3 image is not just great it, could almost be your signature piece.  You are the master of the older generation figures.  yesyes

    DesertDude - so much fun.  I'd love to see those models in an animated short.  Very expressive.

     

    I am headed to the Entry thread to start the voting process.  Thank you to Andrew for such an inspiring theme, and an interesting change of pace (more serious).  Thank you to everyone who participated or visited. 

    Please vote in the Entry thread.

    Post edited by Diomede on
  • DesertDudeDesertDude Posts: 1,235

    Thanks @Stezza_Carrara9 and @Bunyip02_Carrara for the well wishes.  smiley

  • StezzaStezza Posts: 8,050
    Alberto said:

    This is the crude rendered version.

    As I used multipass rendering, after postwork:

    Headwax_Carrara said:

    pretty brilliant, once you get that lighting happening it will sing - great to use Fluidos :)

     

    Bunyip02_Carrara said:

    Looking great so far Alberto !

    Thank you!

    love the ideas and thinking that Carrara'ists come up with.. awesome work Alberto

     

    UnifiedBrain said:

    Resurrection of Victoria One

    This is my second time to use V1 in a Challenge, so I guess this makes the resurrection official. smiley

    However, I discovered that this version of V1 (which comes in the Mimic Lite package) is not the "full" V1, but rather a low-res NG version.  Still, it works for me.

    The people are V1 and M3.  Shirt is M3 everyday wear.  Goggles come from B25 Steampunk Aviator.  The set is The Mad Lab, with some alterations and additions in the model room.  Carrara processes include, aura and text.   GMIC was used, as always.  No postwork.

    just wow... you are getting mucherer better and betterer .. it's awesome seeing your development over time and how you have grasped the use of Carrara and it's tools.. very much enjoy viewing your works.

     

    DesertDude said:

    This is as much as I could get done for this image. Pretty simple modelingfor the most part - just some boxes and cylinders made in the Vertex Room, textured and assembled together. The two main robots have IK chains for their arms. A few of the objects have Aura enabled under the Effects Tab. The one industrial robot arm has a Bulb attached with some Light Effects turned on: CrossScreen, Glow and Stars. Industrial robot arms are textured with Anodized Aluminum from Carrara native content. I rendered the background robots serperate from the foreground and added a subtle Curves filter to each in post.

    Thanks Headwax and Diomede for hosting the challenge!

     

    this really grabs me... great work also.... so much great stuff by you all... and looks even betterer when viewing whilst sitting back with a coffee at lunch time yes

  • ed3Ded3D Posts: 2,180
    Diomede_Carrara said:
    ed3D said:
    Headwax_Carrara said:

    sorry about that ed3D - always look forward to seeing your work!

    _well, thanks then_``~...

    I take it an extra 8 hours won't make the difference?

    Hopefully, another time soon.

     

    _No, not really   _But thanks kindly_

  • UnifiedBrainUnifiedBrain Posts: 3,588

    Sorry for the delayed responses.

    Bunyip02_Carrara said:

     

    UB - very nicely placed straps on Vicky - looking good

    Thanks bunyip.  The secret is in the shadows. smiley

     

    Diomede_Carrara said:

    UB - that V3 image is not just great it, could almost be your signature piece.  You are the master of the older generation figures.  yesyes

    I think that you meant V1, but thanks, I really appreciate the comment.  My experience is that with very little tweaking the old figures are just as useful as the new ones, at least for 95% of the renders I do.

     

    Stezza_Carrara9 said:

    just wow... you are getting mucherer better and betterer .. it's awesome seeing your development over time and how you have grasped the use of Carrara and it's tools.. very much enjoy viewing your works.

    Thanks Stezza.  You continue to set the bar very high.  My grasp of Carrara tools is much less than you imagine, but your words are appreciated!

    Another great Challenge.  Thanks to HW and Diomede for all of their work in making it happen!

  • AlbertoAlberto Posts: 1,436
    Diomede_Carrara said:

    Love the progress, Alberto and DesertDude 

     

    Bunyip02_Carrara said:

    Alberto - final render looks superb

     

    Stezza_Carrara9 said:

    love the ideas and thinking that Carrara'ists come up with.. awesome work Alberto

    Thank you!

     

Sign In or Register to comment.