Loading...
> >

DRAGONESIA - DRAGON3 & G2M CLOTHING SET W.I.P [COMMERCIAL]

24567

Comments

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Oh my dear lord honey, that's just unbelievable. I love that armor for the Dragon, that's just outstanding! Over the top! Top notch! Superb! I think I've about covered it now! lol

  • MEC4DMEC4D Posts: 5,249
    edited May 2014

    Thanks Cathy for your lovely feedback !

    CathyM said:
    Absolutely love this whole thing Cath! The dragon armor looks wonderful - love that the tail weapon is there, but also removable. I especially love the outfit, the mix of fabric, leather and metal is really different and unique, textured it just comes to life... love the boots, love the shoulder pouch, love the hair - another amazing work of art! -Cathy


    Thanks Gogger , I hear you, no problem I think I can split the G2M into separate set and make it stand alone

    Gogger said:
    Szark said:
    I so wish I liked the new Dragon but I don't. Will G2M's outfit be a separate product?


    I've been trying hard to follow the Thumper Rule ("If ya can't say nothin' nice, don't say nothin' at all") but I really, Really, REALLY don't care for the Dragon 3 at all. There I said it. That said, I would quickly purchase this G2M outfit alone, but if it is ONLY available as a part of the dragon armor package, I might have to pass on it. That would be a shame because MEC4D stuff is always top notch.

    Thanks Szark , maybe I will have enough time for the Dragon itself so it would be more worthy for you to invest in it

    LOL I normally follow that self imposed rule and generally keep my moaning to myself or to private conversations. Anyway such as life, win some, you lose some.

    I will look forward to see what comes in the future for the base. This armor is a good start. I like the clothing too.

    Thanks Richard , really glad you like it , I am for plan to finish something cool for HW Horse so I warm up on the Dragon lol another Z challenge , since end of June is my B-day time it would be a nice special but before that 4 other products are going to be released .. rolling stones this season as much as possible lol

    Oh my dear lord honey, that's just unbelievable. I love that armor for the Dragon, that's just outstanding! Over the top! Top notch! Superb! I think I've about covered it now! lol

    Post edited by MEC4D on
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Sounds like your bank account won't mind that one bit! :-)

  • scorpioscorpio Posts: 8,418
    edited December 1969

    As a big fan of the Dragon 3, personally I think Daz have done a great job on creating something that can go a long way instead of confining it to one persons view of what is after all a creature of pure imagination, I just love the armour and the outfit; and would rather see them packaged together - Mec4D I just love what you have done.
    Look forward to what you have in store for Harry as well.

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    since I was working the last 2 months without payment I think it will be enough to cover the DEBIT lol and enough left for the daily bread so I can continue... the golden times in this industry are over long time ago and the most ironic thing is : how better I am getting how minder I make ( the reason may be that i spend more time doing my complex creations in place of doing daily paper dresses ) , but at last I know it is not me ..:)

    RAMWolff said:
    Sounds like your bank account won't mind that one bit! :-)
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks, the Dragon is great as long you got the pro set , I have it so it is really versatile and you can create unique looks , the comments was about the base product in general what is ok for creative people with skills but not enough for regular users that render only , that is the reason why there is just base and pro set , I like it more than the last dragon anyway especially from the technical side ..

    I may arrange the set like get 1 get 1 free for my B-Day special but not sure if this will work out ..we will see if the time frame allow me to do that and if there is a free spot for the day

    scorpio64dragon said:
    As a big fan of the Dragon 3, personally I think Daz have done a great job on creating something that can go a long way instead of confining it to one persons view of what is after all a creature of pure imagination, I just love the armour and the outfit; and would rather see them packaged together - Mec4D I just love what you have done.
    Look forward to what you have in store for Harry as well.
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Some updates in progress here additional hoody
    modeling and texturing also in 2 colors tan leather and black

    ZBrush_Document3.jpg
    1138 x 1517 - 338K
    ZBrush_Document2.jpg
    1138 x 1517 - 415K
    ZBrush_Document.jpg
    1138 x 1517 - 112K
    test10.jpg
    1000 x 1300 - 139K
    test9.jpg
    1000 x 1300 - 108K
  • GoggerGogger Posts: 2,399
    edited December 1969

    Mec4D said:
    Some updates in progress here additional hoody
    modeling and texturing also in 2 colors tan leather and black

    WOW!

    And thanks for the update!

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks, here is the Vest , I may doing big sword in place of the bag .. would be much cooler


    Gogger said:
    Mec4D said:
    Some updates in progress here additional hoody
    modeling and texturing also in 2 colors tan leather and black

    WOW!

    And thanks for the update!

    test11.jpg
    1000 x 1300 - 113K
    test12.jpg
    1000 x 1300 - 130K
    test13.jpg
    1000 x 1300 - 134K
    ZBrush_Document.jpg
    1138 x 1517 - 233K
    ZBrush_Document2.jpg
    1138 x 1517 - 373K
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Glorious work hon!

  • SimonJMSimonJM Posts: 5,982
    edited December 1969

    Looking better than good! :)

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks Richard and Simon
    here are the boots .. now time for the weapons :) getting faster than expected

    test17.jpg
    1000 x 1300 - 147K
    test15.jpg
    1000 x 1300 - 160K
    test14.jpg
    1000 x 1300 - 190K
    ZBrush_Document.jpg
    1517 x 1138 - 483K
    ZBrush_Document.jpg
    1517 x 1138 - 483K
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Thems nice boots hon! I'd buy a pair for MYSELF! :-)

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    with leather pants and jacket would looks good on you :) then you can kick someone else "donkey " auch..with those metal toe LOL
    I remember my ex hubby has sort of protection boots like that for his work and he hates them as they was really heavy because of the metal back and toes and they was minder fashionable but the base was closer to this one .. no laces but click in straps

    RAMWolff said:
    Thems nice boots hon! I'd buy a pair for MYSELF! :-)
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Actually I do wear steel toed boots hon. They are Caterpillar brand. Love them. :-)

  • SpyroRueSpyroRue Posts: 5,020
    edited December 1969

    Your work is just amazing Cath, Not only is the geometry fantastic but your work in texturing and surfaces is superb. Great work! This looks like another of your upcoming sets I'm already sold on :cheese:

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks Spyro

    here preview of the full set in Zbrush open GL NO shaders just plain color textures and bump map so it is really plain base preview
    I exchanged the bag for a sword .. what left are the hair only and it will be done and ready for final material shader setup


    Spyro said:
    Your work is just amazing Cath, Not only is the geometry fantastic but your work in texturing and surfaces is superb. Great work! This looks like another of your upcoming sets I'm already sold on :cheese:
    ZBrush_Document5.jpg
    1138 x 1517 - 240K
    ZBrush_Document4.jpg
    1138 x 1517 - 207K
    ZBrush_Document3.jpg
    1138 x 1517 - 252K
    ZBrush_Document.jpg
    1138 x 1517 - 269K
    ZBrush_Document2.jpg
    1138 x 1517 - 423K
  • SzarkSzark Posts: 10,634
    edited December 1969

    Oh yeah baby...I want a real outfit like that. ;)

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    and the wire frame preview

    WIRE2.jpg
    668 x 880 - 120K
    WIRE.jpg
    668 x 880 - 155K
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Really nice Z previews there Cath. Gives me an idea of the poly count. I like that!

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    @Pete thanks mate!

    @Richard.. you see what is left from the 16 millions poly per figure
    the previews was with the low poly models after extraction of the maps
    keeping it to the level that it don't need sub-d in DS and the maps make the magic here in place..

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    yea, I had to go back and ZRemesh a few items of my own to get the poly count down and I've found that the shaders I've made for the freebie look every bit as good. I'm learning that slowly that high poly is NOT your friend in most cases. lol

  • CathyMCathyM Posts: 261
    edited December 1969

    Wow! The detail you have put into this outfit is amazing, the textured pictures look like photographs! I always love how your textures look so touchable - really looking forward to both the dragon armor and this dragon rider outfit :)

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    too low not good to high not good you need to find the right balance, to high poly are not easy to edit with weight maps and to low are no morphs friendly and when using sub-d even worse so the middle count is the best , sometimes I am to lazy to get down with the poly ..and forget not that you can remesh each group separately for the best performance

    RAMWolff said:
    yea, I had to go back and ZRemesh a few items of my own to get the poly count down and I've found that the shaders I've made for the freebie look every bit as good. I'm learning that slowly that high poly is NOT your friend in most cases. lol
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Mec4D said:
    too low not good to high not good you need to find the right balance, to high poly are not easy to edit with weight maps and to low are no morphs friendly and when using sub-d even worse so the middle count is the best , sometimes I am to lazy to get down with the poly ..and forget not that you can remesh each group separately for the best performance

    RAMWolff said:
    yea, I had to go back and ZRemesh a few items of my own to get the poly count down and I've found that the shaders I've made for the freebie look every bit as good. I'm learning that slowly that high poly is NOT your friend in most cases. lol

    Agreed. Balance! LOL

    Weight mapping is a whole different subject! lmao. I'd rather wash windows! ;-)~

  • tonymousetonymouse Posts: 230
    edited December 1969

    This is awesome!!

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks Cathy, I paint all my textures so no photos used for texturing and everything is computer generated that why you see more details
    as each stitch was modeled and painted at the same time

    CathyM said:
    Wow! The detail you have put into this outfit is amazing, the textured pictures look like photographs! I always love how your textures look so touchable - really looking forward to both the dragon armor and this dragon rider outfit :)
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks a lot !

    tonymouse said:
    This is awesome!!
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    I said it one year ago but with washing dishes .. but I finally got it and now no limits .. and thank DAZ for weight mapping lol
    I loved weight mapping in Carrara before ..so easy as I always hated rigging since Poser 4 in traditional way .. now if DAZ STUDIO 5 allow me to save weight mapping info with the additional Morphs it would be game changing technology again ..and goodbye JMC

    RAMWolff said:

    Weight mapping is a whole different subject! lmao. I'd rather wash windows! ;-)~

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Fingers crossed for allot of great improvements for content makers! :-)

Sign In or Register to comment.