Loading...
> >

The Feh, Meh, Bah Dragons munched my Classic Car Complaint Thread

1…1516182021…50

Comments

  • kyoto kidkyoto kid Posts: 41,036
    edited December 1969

    ...more site software stupidity.

    The last couple days now when I would go to submit a post, it gives me a new blank message page instead.

  • Sfariah DSfariah D Posts: 26,258
    edited December 1969

    Kyoto Kid said:
    ...more site software stupidity.

    The last couple days now when I would go to submit a post, it gives me a new blank message page instead.

    Same for me too.

  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Kulay Wolf said:
    Kyoto Kid said:
    ...more site software stupidity.

    The last couple days now when I would go to submit a post, it gives me a new blank message page instead.

    Same for me too.

    I saw that as well, right click>select all > copy puts the post on the system clipboard and preserves it, if anything goes wrong you paste :) Is prolly compulsory under rules 22 - 24 anyhow

    rule 22 copypasta is made to ruin every last bit of originality
    rule 23 copypasta is made to ruin every last bit of originality
    rule 24 every repost is a repost of a repost

    :lol:

  • TJohnTJohn Posts: 11,095
    edited December 1969

    Kyoto Kid said:
    M F M said:
    Richard Haseltine said:
    7thStone said:
    snowbug said:
    chohole said:
    Don't get me wrong, I like snow, but I couldn't take weeks of it, I do like to see a bit of colour sometimes.

    Then you take food colouring and paint the snow ;)

    My metal picture of Finland during the winter has just changed radically! :coolsmile:

    I thought wolverines and arctic foxes provided plenty of colouration?
    24 different words for "white"... and umpteen for "snow"? ... or is that the Icelanders?

    I suppose you could nom the snow afterwards, after colouring it (`.`)>... *speaking as somebody who is about to go out shopping in 37degC ~_~...*
    ...just avoid the yellow variety.

    http://www.youtube.com/watch?v=TLIppgE45wM
    Don't go where the huskies go... :)

  • TJohnTJohn Posts: 11,095
    edited December 1969

    ps1borg said:
    Kulay Wolf said:
    Kyoto Kid said:
    ...more site software stupidity.

    The last couple days now when I would go to submit a post, it gives me a new blank message page instead.

    Same for me too.

    I saw that as well, right click>select all > copy puts the post on the system clipboard and preserves it, if anything goes wrong you paste :) Is prolly compulsory under rules 22 - 24 anyhow

    rule 22 copypasta is made to ruin every last bit of originality
    rule 23 copypasta is made to ruin every last bit of originality
    rule 24 every repost is a repost of a repost

    :lol:
    +3

  • DanaTADanaTA Posts: 13,207
    edited December 1969

    Kyoto Kid said:
    Woolyloach said:
    ps1borg said:
    Wages have been going down for 3D artists for a while now, can basically hire two modellers for what one cost a decade ago here.

    It's harsh. Dreamworks is laying off, and Rythym and Hues filed for bankruptcy. Now is a crappy time to be a VFX artist, it seems. :down: Lots of VFX houses will stellar talent have gone under in the past few years..

    And I suspect it's going to get worse...


    ...which makes me wonder why Waldemar is hyping it up so much lately.

    Does he do anything else but hype? Sorry, I've had a bad experience with him and will not even look at his new items, no matter the hype.

    Dana

  • kyoto kidkyoto kid Posts: 41,036
    edited December 1969

    ps1borg said:
    Kulay Wolf said:
    Kyoto Kid said:
    ...more site software stupidity.

    The last couple days now when I would go to submit a post, it gives me a new blank message page instead.

    Same for me too.

    I saw that as well, right click>select all > copy puts the post on the system clipboard and preserves it, if anything goes wrong you paste :) Is prolly compulsory under rules 22 - 24 anyhow

    rule 22 copypasta is made to ruin every last bit of originality
    rule 23 copypasta is made to ruin every last bit of originality
    rule 24 every repost is a repost of a repost

    :lol:
    ...I do that out of habit because of my poor connectivity.

    I've also tried writing my responses in an offline app like Word or Notepad, but the forum's formatting is different and when I paste it in the reply box, the line spacing and line breaks are all messed up

    I also find that clicking the back arrow on FF takes me back to what I wrote.

  • kyoto kidkyoto kid Posts: 41,036
    edited December 1969

    DanaTA said:
    Kyoto Kid said:
    Woolyloach said:
    ps1borg said:
    Wages have been going down for 3D artists for a while now, can basically hire two modellers for what one cost a decade ago here.

    It's harsh. Dreamworks is laying off, and Rythym and Hues filed for bankruptcy. Now is a crappy time to be a VFX artist, it seems. :down: Lots of VFX houses will stellar talent have gone under in the past few years..

    And I suspect it's going to get worse...


    ...which makes me wonder why Waldemar is hyping it up so much lately.

    Does he do anything else but hype? Sorry, I've had a bad experience with him and will not even look at his new items, no matter the hype.

    Dana
    ...there are times I get two even three emails in the same day about the same thing.

    Before the whole DreamLight club thing, he created what I consider the best lighting and effects products for Daz Studio. I am still disappointed that he has not updated MoodMaster LightDomePro for 4.5. Yeah, there's UE and other "in scene" effects but they demand more memory and processor resources thus seriously adding to render time. I like the look LDP2 and MM2 give to many of my scenes. They are nice and simple to use. I almost wish he'd just sell the rights to Daz so they could upgrade them.

    When I brought up the question about LDP(DreamLight's signature plugin) I was told that it wasn't a priority and he didn't have the time. That's sad to hear from a vendor who I had a lot of respect for.

  • starionwolfstarionwolf Posts: 3,670
    edited February 2013

    Misty Whisky said:
    starionwolf said:
    I think the controller for the Playstation 4 comes with a touch pad. Also, the console has a powerful processor. That is all that I have heard.

    backwards compat with ps2 and original ps games would be a +++++

    i just read a couple of sources that say the PlayStation 4 is not backwards compatible. Sorry

    Post edited by starionwolf on
  • kyoto kidkyoto kid Posts: 41,036
    edited February 2013

    ...and yet more site software stupidity. Now when I go to post a response it sometimes directs me to the login page. Odd, because when I go back to do a final save of my post (because logging in usually takes me to my account page) I am still shown as being logged in.

    Just to see what would occur after this happened, I clicked on the Submit Post button and the comment successfully posted.

    Post edited by kyoto kid on
  • DanaTADanaTA Posts: 13,207
    edited December 1969

    Kyoto Kid said:
    ...and yet more site software stupidity. Now when I go to post a response it sometimes directs me to the login page. Odd, because when I go back to do a final save of my post (because logging in usually takes me to my account page) I am still shown as being logged in.

    Just to see what would occur after this happened, I clicked on the Submit Post button and the comment successfully posted.

    Yeah, this is by far the most stable software I've ever seen! (tongue firmly in cheek!) :smirk:

    Dana

  • kyoto kidkyoto kid Posts: 41,036
    edited February 2013

    ...with the way things have been going on for the last, what eight months now, surprised it didn't poke through. ;-)

    Post edited by kyoto kid on
  • DanaTADanaTA Posts: 13,207
    edited December 1969

    Kyoto Kid said:
    ...with the way things have been going on for the last, what eight months now, surprised it isn't poking through. ;-)

    Nine months, actually. It went live on May 16th, 2012.

    My cheek is a little sore. :-P

    Dana

  • kyoto kidkyoto kid Posts: 41,036
    edited December 1969

    ...hey guys, the forum's backup again.

  • DanaTADanaTA Posts: 13,207
    edited December 1969

    Kyoto Kid said:
    ...hey guys, the forum's backup again.

    It was down? I didn't have trouble posting earlier. I must be missing something. :-S

    Dana

  • M F MM F M Posts: 1,388
    edited February 2013

    Yeah, the forum was down for something like an hour and a half. Oh the palpitations! ;-)

    eta: look at the "Site down for maintenance" Announcement at the top of Commons (`.`)/...

    Post edited by M F M on
  • kyoto kidkyoto kid Posts: 41,036
    edited December 1969

    ...looks like they missed a few bugs as I got the login page and blank response pager again.

  • DanaTADanaTA Posts: 13,207
    edited December 1969

    Oh...well it looks like it will probably go down at least one or two more times before the weekend is over.

    Have fun with it!

    Dana

  • ps1borgps1borg Posts: 12,776
    edited February 2013

    Hot. Feel like should go on one of those cruise ship disasters for a not boring holiday with a bit of weather :lol:

    eta that kind of day :lol: Must be the heat :coolmad:

    O.png
    334 x 257 - 58K
    interrupted.png
    262 x 146 - 15K
    T.png
    427 x 189 - 26K
    Post edited by ps1borg on
  • MistaraMistara Posts: 38,675
    edited February 2013

    slept through the downtime. :)

    in the 40 Fahrenheits today, should see some snow melt off today. laundry may today or tomorrow? decisions.


    i was in the store and i was logged in, but not logged in in the forums and the forum login said invalid so i had to back to the store, click money for nothing song lol, and log out, then log back in and then came back to the forum and there is a new dress for v4 so went back to the store, then wanted a new character to render with the new dress and found a character that has a p9 promo, yayy, staying away from new hairs resisssst ... copy to clipboard in case the log in didn't take


    going on record here, that actually, a lot of the running commentary running through my little misty brain doesn't make it to the keyboard. :LOL:

    Post edited by Mistara on
  • MistaraMistara Posts: 38,675
    edited December 1969

    took less than 5 min to catch up at r-poser-forum.

    desperation, reading threads i wouldn't normally read.

    doesn't anyone have a complaint this morning?

  • JaderailJaderail Posts: 0
    edited December 1969

    Okay you asked, Complaint:

    Cold enough for frost on everything this morning which is pretty but makes my bones ache.
    I have a semi-nagging headache that asprin just will not touch and I'm not allowed to take other meds for it.
    I'm getting a sore throat and tickly little cough to go with it, hope it goes away soon, I hate colds.


    Other than those I'm fine today. How are all you?

  • MistaraMistara Posts: 38,675
    edited December 1969

    Jaderail said:
    Okay you asked, Complaint:

    Cold enough for frost on everything this morning which is pretty but makes my bones ache.
    I have a semi-nagging headache that asprin just will not touch and I'm not allowed to take other meds for it.
    I'm getting a sore throat and tickly little cough to go with it, hope it goes away soon, I hate colds.


    Other than those I'm fine today. How are all you?


    sympathize - those tickly coughs is lil but a big misery

  • MistaraMistara Posts: 38,675
    edited December 1969

    doh, if i'd added a 3rd thing like a hair, would've gotten a 15% discount? oh the pain

  • RezcaRezca Posts: 3,393
    edited December 1969

    Drawing with a mouse (And thus without a tablet) sucks XD
    Especially when it comes to frills.... I have trouble drawing foldy wrinkly frills XD And sadly this species has LOTS of them XD
    I was having a particularly difficult time drawing the frills on the throat, which is especially apparent in the "Happy" emotion box (RIght by my tail, with his forked tongue sticking out.) where it looks... Very weird XD

    RaeRae-Eastern.jpg
    1024 x 800 - 111K
  • Sfariah DSfariah D Posts: 26,258
    edited December 1969

    I want to work with some dragons (im DS4.5 or P2012

  • RezcaRezca Posts: 3,393
    edited December 1969

    Also playing with a new font I downloaded. Took a paragraph from one of my writings, tossed it into Google Translate and picked a language at random that would produce standard characters (Which would leave Japanese, Greek, Hebrew, and so on out.), then pasted that into OpenOffice to swap out a few syllables and letters before finally pasting that into Photoshop using the new font (Drawn Old English).

    Finally, I pulled out some dirt masks from my 3DTotal collections and blended them in various ways that produced nice looking results o3o

    Faded-Text.jpg
    900 x 331 - 193K
  • JaderailJaderail Posts: 0
    edited December 1969

    Kulay Wolf said:
    I want to work with some dragons (im DS4.5 or P2012)
    Load them in DS 4.5 or Poser 2012 and get to work. Nothing to it but to do it. Of course you'll need some Dragons in your content first. The Sub-Dragon comes with DS4.5 by the way.
  • JaderailJaderail Posts: 0
    edited December 1969

    Rezca said:
    Also playing with a new font I downloaded. Took a paragraph from one of my writings, tossed it into Google Translate and picked a language at random that would produce standard characters (Which would leave Japanese, Greek, Hebrew, and so on out.), then pasted that into OpenOffice to swap out a few syllables and letters before finally pasting that into Photoshop using the new font (Drawn Old English).

    Finally, I pulled out some dirt masks from my 3DTotal collections and blended them in various ways that produced nice looking results o3o

    Nice Font! I'll add that one to my collection. Your image looks great by the way.
  • MistaraMistara Posts: 38,675
    edited December 1969

    Kulay Wolf said:
    I want to work with some dragons (im DS4.5 or P2012

    Poser12 came with a weightmapped dregon :)

This discussion has been closed.