Loading...
> >

[Just Released} Mec4D The Great Wizards for G2Males(s) [Commercial]

1234568

Comments

  • KeryaKerya Posts: 10,943
    edited December 1969

    Eeeeeek - on the computer dying ... and then the monitor!
    Poor Cath!

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Almost done ! with the new installation.. one more day to go with all the stuff :(
    before when you buy TV or Monitor it last for decade or until you don't want to have it anymore now it is a disposable junk of plastic lol
    but installing all your programs and stuff is the worse part of that so boring waste of time ..

  • bicc39bicc39 Posts: 589
    edited December 1969

    "You Shall NOT Pass!
    You .over there,... maybe!"

    (little help from Zbrush on face)

    Hair by Ramone of Brooklyn.
    Clothing by Marie of Iowa.
    Shoes by Fleet Feet.
    Underclothing by Jockey
    Nails by Bite.

    No animals were harmed during the making
    of this image (not counting the racoon...sorry Sparky!!!)

    mec4d.251_.jpg
    624 x 624 - 240K
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    is that on the other side of the image that we don't see ? lol
    nice shot !
    ---------------------------
    Hair by Ramone of Brooklyn.
    Clothing by Marie of Iowa.
    Shoes by Fleet Feet.
    Underclothing by Jockey
    Nails by Bite.
    ---------------------------

  • bicc39bicc39 Posts: 589
    edited December 1969

    Thank you so much, Sparky thanks you too!

  • Sfariah DSfariah D Posts: 26,293
    edited December 1969

    Thanks for the new textures for the wizard outfit!

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    So sorry to hear your computer whoa's honey. Hope you didn't loose any information.... XOXO

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks , no I recovered all info from the old HD so I could copy my important stuff
    :)

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    So happy for you hon! That's really a relief! Hugs

  • IvyIvy Posts: 7,165
    edited December 1969

    Look Out old man coming threw!

    look_out_old_man_coming_threw!.jpg
    1920 x 1080 - 315K
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Great render IVY !!! love it!

    I am glad he made the steps !! now in case of falling , he can roll down .. ;)

    thanks for sharing!
    Cath

  • greysgreys Posts: 335
    edited December 1969

    Question - those of us who received the alchemist texture set for posting a render - is that under the normal daz licence or a more restricted one? eg, can we use it for commissioned works or would we need to purchase the store version for the full licence?

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    You can use it the same way as the Wizard product you purchased from the store .. no special restrictions

  • greysgreys Posts: 335
    edited December 1969

    Mec4D said:
    You can use it the same way as the Wizard product you purchased from the store .. no special restrictions

    Thanks :) Sorry for the delayed reply, my email sub seems to have dropped so I didn't see it until I came looking for the thread again.

    I'm having a weird issue with the beard at the moment. It's... not showing up. I click it, it loads, I get no error messages and there's no issues showing in the log, it shows up in the scene tab but... it doesn't show up in the scene, either in preview or render. It is fit to G2M. I've checked the surface opacity, and it's set to visible in parameters, it's just... not?

    I've tried uninstalling and reinstalling, closing and restarting studio and rebooting the computer but it hasn't fixed the issue, and I've tried both the latest beta and the stable build. It was working fine last time I used it a couple of weeks ago.

    Screen_Shot_2014-05-16_at_6.05_.45_pm_.png
    720 x 786 - 63K
    Screen_Shot_2014-05-16_at_6.05_.23_pm_.png
    802 x 1270 - 121K
    Screen_Shot_2014-05-16_at_6.05_.00_pm_copy_.png
    2000 x 810 - 563K
  • MEC4DMEC4D Posts: 5,249
    edited May 2014

    You need to turn on the wizard head to have the beard showing up
    :) if you have the Alchemist installed you can ten control the shape and length of the beard

    Post edited by MEC4D on
  • greysgreys Posts: 335
    edited May 2014

    Mec4D said:
    You need to turn on the wizard head to have the beard showing up
    :) if you have the Alchemist installed you can ten control the shape and length of the beard

    huh, don't think I've ever stumbled on a prop that only worked on a specific morph. So there's no way to use it on other chars then?

    THanks for the quick reply :)

    Edit: okay, it works if I show hidden parameters on the beard and just dial the GW head in there without dialing it on G2M. Workable. :)

    Post edited by greys on
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    it is not a prop , it is reverse deformation animated beard figure exclusive for the wizard .. as stated on the product page
    the beard is only to use with the wizard as it was created to match exactly the face , it may looks just simple but it is very complex creation
    and it was a bonus for the clothing set ..
    facial hair are the most time consuming setup as all facial morphs need to be created as auto do not work on fibers geometry


    the bonus beard in my last Greek product The Spartan can be used with all genesis male shapes
    and my future standalone Unshaven 2 HD ..so you will have all functionality and ready for all shapes with a lot of beard shapes and morph ..

    sorry you missed the info .. if you really need it, you can do as follow, load the wizard head , then export the beard geometry , load it back and use as smart prop by parenting it to the head .. it will not working with facial expression but only with poses

  • greysgreys Posts: 335
    edited May 2014

    Mec4D said:
    it is not a prop , it is reverse deformation animated beard figure exclusive for the wizard .. as stated on the product page
    the beard is only to use with the wizard as it was created to match exactly the face , it may looks just simple but it is very complex creation
    and it was a bonus for the clothing set ..
    facial hair are the most time consuming setup as all facial morphs need to be created as auto do not work on fibers geometry


    the bonus beard in my last Greek product The Spartan can be used with all genesis male shapes
    and my future standalone Unshaven 2 HD ..so you will have all functionality and ready for all shapes with a lot of beard shapes and morph ..

    sorry you missed the info .. if you really need it, you can do as follow, load the wizard head , then export the beard geometry , load it back and use as smart prop by parenting it to the head .. it will not working with facial expression but only with poses

    No worries. :)

    Sorry if I came off as upset/bothered - I really wasn't, it just wasn't something I'd come across before so it was a bit of a '...huh, so that's a thing? I didn't know that' moment. I've found if I just dial in the head shape on the beard (in the hidden parameters) it works mostly, as long as the character I use it on doesn't have too narrow a jaw. I've seen your progress threads here, I know how much work you put into stuff and how much attention you put into the detail and I definitely didn't feel like I'd been tricked or anything.

    I just thought I'd double check on the second point, but then figured it out myself after I posted. I don't mind using the workaround at all, now that I know it's there. Just dialing the head in on the beard works well enough for the project I'm doing right now (a friend wants an illustration of the scene in GoF where Fred and George cross the age line and get beards).

    Thank you for the help and answers, and this definitely hasn't affected my happiness with the set at all.

    Definitely looking forward to your Greek sets though, think my excitement's split pretty much 50/50 between the curly short hair and the outfits themselves (I've been looking for hair like that for a long time).

    Post edited by greys on
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Oh that is good .. I forgot to tell you about the hidden parameters .. blond moment

    The curly hair will be free with the Hercules outfit by purchasing Spartan or Hoplite soldier for 24h so I hope you don;t miss this special promotion ..
    The curly hair is nothing phenomenal , it is just early idea but surprising it was looking fine hahaha so I added to the free set the short version only .. as I run with problems with the long sides on other shapes so I made it short as in the last preview

    and you know me I am always worry about my customers .. and sometimes I need to find a simple way to make things better, less time consuming and affordable .. selling a dress without shoes is ok, but having the dress with matching shoes is always better :)

    good luck with your project!!
    and if anything let me know :)


    temporal.ranger said:
    Mec4D said:
    it is not a prop , it is reverse deformation animated beard figure exclusive for the wizard .. as stated on the product page
    the beard is only to use with the wizard as it was created to match exactly the face , it may looks just simple but it is very complex creation
    and it was a bonus for the clothing set ..
    facial hair are the most time consuming setup as all facial morphs need to be created as auto do not work on fibers geometry


    the bonus beard in my last Greek product The Spartan can be used with all genesis male shapes
    and my future standalone Unshaven 2 HD ..so you will have all functionality and ready for all shapes with a lot of beard shapes and morph ..

    sorry you missed the info .. if you really need it, you can do as follow, load the wizard head , then export the beard geometry , load it back and use as smart prop by parenting it to the head .. it will not working with facial expression but only with poses

    No worries. :)

    Sorry if I came off as upset/bothered - I really wasn't, it just wasn't something I'd come across before so it was a bit of a '...huh, so that's a thing? I didn't know that' moment. I've found if I just dial in the head shape on the beard (in the hidden parameters) it works mostly, as long as the character I use it on doesn't have too narrow a jaw. I've seen your progress threads here, I know how much work you put into stuff and how much attention you put into the detail and I definitely didn't feel like I'd been tricked or anything.

    I just thought I'd double check on the second point, but then figured it out myself after I posted. I don't mind using the workaround at all, now that I know it's there. Just dialing the head in on the beard works well enough for the project I'm doing right now (a friend wants an illustration of the scene in GoF where Fred and George cross the age line and get beards).

    Thank you for the help and answers, and this definitely hasn't affected my happiness with the set at all.

    Definitely looking forward to your Greek sets though, think my excitement's split pretty much 50/50 between the curly short hair and the outfits themselves (I've been looking for hair like that for a long time).

  • MuzeMuze Posts: 182
    edited December 1969

    Mec4D said:
    Oh that are wonderful renders guys!!! thanks for sharing!!!

    I made reply render to Simon hahahaha The Official Meeting , guess what? they love it , weapons of any kind was not allowed ! hahah the saga continue !

    P.S if you like to have the extra morphs and textures ( the Alchemist ) send me e-mail to office @ mec4d.com ( without spaces )

    Awesome pic!!!

  • JesterVIIJesterVII Posts: 175
    edited December 1969

    Well I just got this today, and I'm currently cooking a picture as I type this. The beard and heir are what really sold this for me by the way the clothes were a bonus. Been trying to make a decent St. Nick picture for my mother for two weeks now and this plus the aging morphs have made it possible. Will post once its all done cooking.

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks, can't wait to see the final work :)
    Cath

    JesterVII said:
    Well I just got this today, and I'm currently cooking a picture as I type this. The beard and heir
    are what really sold this for me by the way the clothes were a bonus. Been trying to make a decent St. Nick picture for my mother for two weeks now and this plus the aging morphs have made it possible. Will post once its all done cooking.
  • JesterVIIJesterVII Posts: 175
    edited December 1969

    Well here it is. It is also the first render I've done with Reality/Lux that I truly like. Only post work was to add my signature.

    Santa.png
    1426 x 1205 - 2M
  • SimonJMSimonJM Posts: 5,983
    edited December 1969

    Mec4D said:
    Thanks, can't wait to see the final work :)
    Cath

    JesterVII said:
    Well I just got this today, and I'm currently cooking a picture as I type this. The beard and heir
    are what really sold this for me by the way the clothes were a bonus. Been trying to make a decent St. Nick picture for my mother for two weeks now and this plus the aging morphs have made it possible. Will post once its all done cooking.

    Good to hear from you, Cath. Hope all is well with you! :)
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Looking good, thanks for sharing !!

    JesterVII said:
    Well here it is. It is also the first render I've done with Reality/Lux that I truly like. Only post work was to add my signature.
  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thanks Simon

    just busy with all the new work ... quiet but productive
    I hope everything is going well

    Cath

    SimonJM said:
    Mec4D said:
    Thanks, can't wait to see the final work :)
    Cath

    JesterVII said:
    Well I just got this today, and I'm currently cooking a picture as I type this. The beard and heir
    are what really sold this for me by the way the clothes were a bonus. Been trying to make a decent St. Nick picture for my mother for two weeks now and this plus the aging morphs have made it possible. Will post once its all done cooking.

    Good to hear from you, Cath. Hope all is well with you! :)
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    So nice to see you surface honey. Hope your holidays were nice. Happy New Year! XO

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    Thank you so much Richard
    little birds told me the other day you wonder where I vanished haha
    well I am all the time around .. just very busy with new products and a lot of stuff in production
    dont want to spoil the surprises that why dont post anything in the forums

    but started to miss everyone already
    anyway... if we don't talk Happy New Year :)

    Cath

    RAMWolff said:
    So nice to see you surface honey. Hope your holidays were nice. Happy New Year! XO
  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    Thanks hun. I'm just glad your OK.

    I'm working away on Dusk stuff right now. He's released so I can talk about it finally! lol

  • MEC4DMEC4D Posts: 5,249
    edited December 1969

    I know he is .. since I reworking my stuff for him ;) but I don't want to talk about yet lol waiting when everything is done

    RAMWolff said:
    Thanks hun. I'm just glad your OK.

    I'm working away on Dusk stuff right now. He's released so I can talk about it finally! lol

Sign In or Register to comment.