Loading...
> >

WillowRaven's latest model/product requests: Legend of the Seeker outfit

1…34689…23

Comments

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    simpleplanning said:
    let me know if this looks better


    Looks great :D

  • blender_3d_lover_52ce199f05blender_3d_lover_52ce199f05 Posts: 0
    edited December 1969

    ok 1 last issue before i start mapping
    how much detail is needed? there is an issue with the angle of the headstock causing strings to collide withe the tuning pegs

    lute_strings.jpg
    800 x 600 - 53K
  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    simpleplanning said:
    ok 1 last issue before i start mapping
    how much detail is needed? there is an issue with the angle of the headstock causing strings to collide withe the tuning pegs


    Oh ... no worries about that. It won't be seen in the scene and if I ever do show it this close, I can fix something like that in post.


    :D

  • blender_3d_lover_52ce199f05blender_3d_lover_52ce199f05 Posts: 0
    edited December 1969

    had to ask cause i tend to be a perfectionists
    ill get the mapping and materail zones done in the next couple of days

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    simpleplanning said:
    had to ask cause i tend to be a perfectionists
    ill get the mapping and materail zones done in the next couple of days


    Great :D

  • blender_3d_lover_52ce199f05blender_3d_lover_52ce199f05 Posts: 0
    edited December 1969

    had a few minutes today and got the materials zones done
    tonight ill work on the mapping and digging up the textures

    lute_zones.jpg
    800 x 600 - 15K
  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    simpleplanning said:
    had a few minutes today and got the materials zones done
    tonight ill work on the mapping and digging up the textures


    Looking so awesome! I am so excited :D

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    How's the lute coming? The rest of my scene is ready but for it :D

  • blender_3d_lover_52ce199f05blender_3d_lover_52ce199f05 Posts: 0
    edited December 1969

    the modeling is done
    if you want it with just the material zones i can upload it tonight but the actual materials will take a bit longer because i got into a bit of a pickle
    ive sprained my right wrist and being right handed my work is all on hold till after i see the doc on wed.

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    simpleplanning said:
    the modeling is done
    if you want it with just the material zones i can upload it tonight but the actual materials will take a bit longer because i got into a bit of a pickle
    ive sprained my right wrist and being right handed my work is all on hold till after i see the doc on wed.


    Well. I can probably find the materials on my own. It's about time I learn to anyway ... lol. How to I make a map?

  • blender_3d_lover_52ce199f05blender_3d_lover_52ce199f05 Posts: 0
    edited December 1969

    the mapping is already done and saved as .tga files for the zones
    ill pack it up and upload now
    ill post the link asap

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    simpleplanning said:
    the mapping is already done and saved as .tga files for the zones
    ill pack it up and upload now
    ill post the link asap


    Thanks :D

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    Hello, again.


    I need a baby bottle similar to this one: http://www.sharecg.com/v/12581/3d-model/Baby-milk-bottles?division_id=11


    Anybody in the mood?

  • blender_3d_lover_52ce199f05blender_3d_lover_52ce199f05 Posts: 0
    edited December 1969

    Miss WillowRaven
    Sadly I must inform you that my husband will not be finnishing the models he was working on. All of his projects are stalled in completion gor 6-10 weeks. He is as stubborn as a mule and tried to work with a broken right wrist, and now need surgery to repair nerve damage.
    His doctor believes the damage is minor but will not know until the surgery. He appologizes for the inconvienece.

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    simpleplanning said:
    Miss WillowRaven
    Sadly I must inform you that my husband will not be finnishing the models he was working on. All of his projects are stalled in completion gor 6-10 weeks. He is as stubborn as a mule and tried to work with a broken right wrist, and now need surgery to repair nerve damage.
    His doctor believes the damage is minor but will not know until the surgery. He appologizes for the inconvienece.


    OMG ... Thanks for letting me know. I hope he feels better, soon.

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    I final got to the cover that needed the derrick, and here it is :D

    Thanks, again, guys :D You guys rock!

    Leroys-Chance---final-cover---CROPPED----FOR-WEB_at_777.jpg
    503 x 777 - 70K
  • WillowRavenWillowRaven Posts: 3,787
    edited August 2012

    AidanaWillowRaven said:
    simpleplanning said:
    Miss WillowRaven
    Sadly I must inform you that my husband will not be finnishing the models he was working on. All of his projects are stalled in completion gor 6-10 weeks. He is as stubborn as a mule and tried to work with a broken right wrist, and now need surgery to repair nerve damage.
    His doctor believes the damage is minor but will not know until the surgery. He appologizes for the inconvienece.


    OMG ... Thanks for letting me know. I hope he feels better, soon.


    SP, I just wanted to show you the finished piece the lute was planned for because I didn't want you to think you had left me hangin'. As luck would have it, someone found me an old, old prop, that had no texture, but would get the job done :D


    Thank you for even trying, knowing you should not have been using your hand.

    The-Keeper---signed---for-web_at_777.jpg
    503 x 777 - 59K
    Post edited by WillowRaven on
  • patience55patience55 Posts: 7,006
    edited August 2012

    AidanaWillowRaven said:
    Hello, again.


    I need a baby bottle similar to this one: http://www.sharecg.com/v/12581/3d-model/Baby-milk-bottles?division_id=11


    Anybody in the mood?


    There's a free .obj here.

    http://www.turbosquid.com/3d-models/free-baby-bottle-3d-model/600345

    And an inexpensive one with a cap.
    http://www.turbosquid.com/3d-models/glass-baby-bottle-3d-max/447788

    Post edited by patience55 on
  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    Patience55 said:
    AidanaWillowRaven said:
    Hello, again.


    I need a baby bottle similar to this one: http://www.sharecg.com/v/12581/3d-model/Baby-milk-bottles?division_id=11


    Anybody in the mood?


    There's a free .obj here.

    http://www.turbosquid.com/3d-models/free-baby-bottle-3d-model/600345

    And an inexpensive one with a cap.
    http://www.turbosquid.com/3d-models/glass-baby-bottle-3d-max/447788


    Thanks :D


    I'll try it out :D

  • WillowRavenWillowRaven Posts: 3,787
    edited August 2012

    I need a DNA molecule. I mentioned it before, in a separate thread, thinking I'd be able to find people who knew where some were. Unfortunately, none of the ones I was lead to open in DS3, so I might need one modeled for my needs.


    This is for a book cover, as most of my custom requests are, so I'm willing to negotiate a fee. PM me if you want to talk rates. :D


    Thanks, guys :D


    EDIT - I thought I better add a little more info. I need the helix fairly detailed and recognizable. It has to be able to handle a full sized V4 posed in the center of it. It's a scifi novel about cloning.


    Here is a link to one I was led to before that I liked, but it didn't work. I don't know if it didn't download right or what. But the description mentions that the colors can't be altered in anything but 3DS. I would definitely want to be able to alter colors and hide various parts to suit the design.

    http://zananeichan.deviantart.com/art/DNA-For-All-Obj-File-116680573

    Post edited by WillowRaven on
  • patience55patience55 Posts: 7,006
    edited December 1969

    AidanaWillowRaven said:
    I need a DNA molecule. I mentioned it before, in a separate thread, thinking I'd be able to find people who knew where some were. Unfortunately, none of the ones I was lead to open in DS3, so I might need one modeled for my needs.


    This is for a book cover, as most of my custom requests are, so I'm willing to negotiate a fee. PM me if you want to talk rates. :D


    Thanks, guys :D


    EDIT - I thought I better add a little more info. I need the helix fairly detailed and recognizable. It has to be able to handle a full sized V4 posed in the center of it. It's a scifi novel about cloning.


    Here is a link to one I was led to before that I liked, but it didn't work. I don't know if it didn't download right or what. But the description mentions that the colors can't be altered in anything but 3DS. I would definitely want to be able to alter colors and hide various parts to suit the design.

    http://zananeichan.deviantart.com/art/DNA-For-All-Obj-File-116680573

    That one didn't work for me either.
    Maybe one of these would be helpful.


    http://www.turbosquid.com/3d-models/free-dna-3d-model/612564

    http://www.turbosquid.com/3d-models/free-dna-3d-model/428868

    http://www.turbosquid.com/3d-models/3d-dna-strand-model/247520

    inexpensive:
    http://www.turbosquid.com/3d-models/dna-double-helix-strand-3d-dxf/564624

    http://www.turbosquid.com/3d-models/maya-dna/433249

  • Robert FreiseRobert Freise Posts: 4,433
    edited December 1969

    ShareCG

    http://www.sharecg.com/v/62551/browse/5/3D-Model/DNA-Molecule

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    Robert Freise said:
    ShareCG

    http://www.sharecg.com/v/62551/browse/5/3D-Model/DNA-Molecule


    Thank you. I could not get that one to open in Daz, either. I may be having some luck with the first one I shared a link to. If I do, I'll let ya'll know :D

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    Update on my DNA molecule woes ... lol:


    I finally got the model from DA to load in Daz, and can alter the colors using the surface selection tool. But now that I merged another helix into the scene, the others do not allow me to alter the colors. So weird. Anyway, I'll work with what I've got ... lol. A decent artist can make it work, right?

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    Just realized I forgot to show you guys how I made the helix work. I only managed it once ... lol. And no idea how I did it, because I couldn't duplicate what I did to make it work in Daz.


    Luckily, being the AD at that house, I get to make the call to alter the original concept ... lol.


    Have a look-see:

    Experiment-38-front-cover---for-web_777.jpg
    518 x 777 - 67K
  • shaaeliashaaelia Posts: 613
    edited December 1969

    That is an awesome cover for a book!

  • WillowRavenWillowRaven Posts: 3,787
    edited December 1969

    Shaaelia said:
    That is an awesome cover for a book!

    Thanks :D

  • WillowRavenWillowRaven Posts: 3,787
    edited September 2012

    Looking for a pine cone ... not a tree ornament, but a realistic pine cone. I am assuming one is available nestled within another product, but searches bring up a dud. Any ideas?

    Post edited by WillowRaven on
  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    I know I've got some in my collection...but I've got no idea where I got them from.

  • patience55patience55 Posts: 7,006
    edited December 1969

    Well not for free but there are a few over at Turbosquid.
    Skipping the .max only files, start about $20.
    http://www.turbosquid.com/3d-models/pine-cone-3d-3ds/587436

    http://www.turbosquid.com/Search/Index.cfm?keyword=pinecone&x=0&y=0
    Mind you there's supposed to be free conversion available from Turbosquid for purchased files. Have no idea as to the time frame to obtain one.

Sign In or Register to comment.