Loading...
> >

Celebrity Look-a-Likes for 3D figures Part 2

1…6791112…100

Comments

  • nonesuch00nonesuch00 Posts: 18,217
    edited April 2016
    mrinal said:
    Optimus Shepard said:

    Hey does anybody know if there's a character out there that looks like Priyanka Chopra?

    Unfortunately, I have seen the similarity only with this shot.

     

    That looks like a young Cat from East Enders. As far as the Anna Friel character that easily looks like her from the photos I've seen although I don't know it it was intentional. The textures and hair go a long way towards establishing perceived identity.

    Post edited by nonesuch00 on
  • XenomorphineXenomorphine Posts: 2,421
    Miguel2121 said:

    What do you think? Doesn't this character look like Anna Friel?

    Character:

    https://www.renderosity.com/mod/bcs/p3d-eva-for-victoria-4-and-genesis-2-female/109236/

    Original person:

    http://www.imdb.com/name/nm0295484/

    I remember Friel from way back when she was on a soap opera, but honestly don't see any similarity in there. Even when young, her face seemed a lot narrower than that shows.

    Some youthful reference pictures:

    http://www.listal.com/viewimage/1940042
    http://www.listal.com/viewimage/1940016
    https://meatgrinder.co/brookside-anna-friel-327857.html
    https://s-media-cache-ak0.pinimg.com/236x/2d/1d/19/2d1d19c55d128be3cb458b61ef597ce0.jpg
    http://i500.listal.com/image/1940061/500full.jpg

  • XenomorphineXenomorphine Posts: 2,421
    ChangelingChick said:

    That's a great start. There's definitely a good resemblance. I think the chin/jaw need to be a little higher. Her face isn't quiet that long. Also there needs to be a little more definition under her eyelids. One thing you can do to see where it's off is load a plane primitive in DS, set a picture of her as the texture on it, then adjust the scale until it's just in front of her face. Dial down the opacity, then you can see where it doesn't mesh up. 

    Gah! I've just realised where I've been going wrong!

    This picture is the one I've been using on a plane primitive (as you noted) top shape the front: http://www.gloriesworld.net/wp-content/uploads/2014/10/juliet-landau-8.jpg

    When I was refreshing to check the proportions are right, it suddenly became clear... The reason her eyes are so compelling is that her entire brow curves in this beautifully sleek circle down across the nose and it's almost perfectly in line with the shape of her eye sockets. It makes sense why she has that serpentine-like appearance now.

    Unfortunately, I'm at a miss as to how to replicate this with existing morphs! I can only make a rough attempt at widening the brow just immediately above the bridge of her nose, but that only brings the curve down to there and then the nose of G3F goes at an angular straight downwards shape. I've tried playing around with everything, from the G3F Head Morph Resource Kit and Dogz' excellent 200 Morphs product, to adding in various degrees of several G3F characters and nothing seems to work.

    Was tempted to get the new Grey Alien for G3F, in an effort to get this unique shape, but then realised it doesn't have a separate head shaping morph, so... That's not an option!

    Anyone have any ideas? I don't have anything like Zbrush or Blender (have no idea how to properly use them). There must be something out there to help G3F to to become Juliet Landau's likeness!

  • ChangelingChickChangelingChick Posts: 3,231
    Xenomorphine said:
    ChangelingChick said:

    That's a great start. There's definitely a good resemblance. I think the chin/jaw need to be a little higher. Her face isn't quiet that long. Also there needs to be a little more definition under her eyelids. One thing you can do to see where it's off is load a plane primitive in DS, set a picture of her as the texture on it, then adjust the scale until it's just in front of her face. Dial down the opacity, then you can see where it doesn't mesh up. 

    Gah! I've just realised where I've been going wrong!

    This picture is the one I've been using on a plane primitive (as you noted) top shape the front: http://www.gloriesworld.net/wp-content/uploads/2014/10/juliet-landau-8.jpg

    When I was refreshing to check the proportions are right, it suddenly became clear... The reason her eyes are so compelling is that her entire brow curves in this beautifully sleek circle down across the nose and it's almost perfectly in line with the shape of her eye sockets. It makes sense why she has that serpentine-like appearance now.

    Unfortunately, I'm at a miss as to how to replicate this with existing morphs! I can only make a rough attempt at widening the brow just immediately above the bridge of her nose, but that only brings the curve down to there and then the nose of G3F goes at an angular straight downwards shape. I've tried playing around with everything, from the G3F Head Morph Resource Kit and Dogz' excellent 200 Morphs product, to adding in various degrees of several G3F characters and nothing seems to work.

    Was tempted to get the new Grey Alien for G3F, in an effort to get this unique shape, but then realised it doesn't have a separate head shaping morph, so... That's not an option!

    Anyone have any ideas? I don't have anything like Zbrush or Blender (have no idea how to properly use them). There must be something out there to help G3F to to become Juliet Landau's likeness!

    Without ZBrush or Hex or something, it'll be hard to get a clean morph with what you want to do. There are a lot of shaping MR's you could look at, but I can't think of one in particlar that does what you're looking for... DieTrying's 182 Morphs for V4 is one I go back to a lot, and you can port that over to G3F without too many issues. Without a modeling program to fix the eye area though (the lashes and eyelid edges tend to muck up), I'm not sure how you'd go about it.

     

  • ChangelingChickChangelingChick Posts: 3,231

    OH! Also, I think some of that can be done with contouring on the texture maps since I think the shadows on her nose are at least partially makeup. You'd be amazed at what a difference the texture makes.

  • ScavengerScavenger Posts: 2,674

    I'd sware this looks like someone famous...but no one I've gone to can name it.

    __fetch.jpg
    1000 x 1300 - 204K
  • XenomorphineXenomorphine Posts: 2,421

    Darn... I can only hope that the Creature Creator set gets here soon, so that I can try applying some of the usual alien eye socket shapes. They might help enough for a few other shaping morphs to compensate.

  • lwaveslwaves Posts: 238
    Scavenger said:

    I'd sware this looks like someone famous...but no one I've gone to can name it.

    My first thought when looking at just the face and nothing else, is that I can kind of see a tiny little bit of Elizabeth Henstridge - Simmons in Agents Of SHIELD. But when I think of that show it then makes me think she looks much more like Adrianne Palicki (Bobbi Morse) from the same show.

  • Sensual ArtSensual Art Posts: 645
    lwaves said:
    Scavenger said:

    I'd sware this looks like someone famous...but no one I've gone to can name it.

    My first thought when looking at just the face and nothing else, is that I can kind of see a tiny little bit of Elizabeth Henstridge - Simmons in Agents Of SHIELD. But when I think of that show it then makes me think she looks much more like Adrianne Palicki (Bobbi Morse) from the same show.

    Those jaws remind me of Keira Knightly

  • SixDsSixDs Posts: 2,384

    "this looks like someone famous"

    Carmen Electra, perhaps?

  • XenomorphineXenomorphine Posts: 2,421

    In my continuing quest to replicate the curved slope of Juliet Landau's central/upper brow/nose area, I noticed these, today, which I could technically get both of on discount. Both seem to have a gentle sloping curve in that area and I'm wondering if I could dial one of their heads in, then modify the rest accordingly.

    Source pictures:
    http://www.gloriesworld.net/wp-content/uploads/2014/10/juliet-landau-8.jpg
    http://www.deverillweekes.com/blog/wp-content/gallery/juliet-landau/juliet-landau-12-28-11-2.jpg

    But which one looks like they have the most applicable 'upper nose' area?
    http://www.daz3d.com/viola-for-genesis-3-female-s
    http://www.daz3d.com/disa-for-genesis-3-female-s

  • ChangelingChickChangelingChick Posts: 3,231
    Xenomorphine said:

    In my continuing quest to replicate the curved slope of Juliet Landau's central/upper brow/nose area, I noticed these, today, which I could technically get both of on discount. Both seem to have a gentle sloping curve in that area and I'm wondering if I could dial one of their heads in, then modify the rest accordingly.

    Source pictures:
    http://www.gloriesworld.net/wp-content/uploads/2014/10/juliet-landau-8.jpg
    http://www.deverillweekes.com/blog/wp-content/gallery/juliet-landau/juliet-landau-12-28-11-2.jpg

    But which one looks like they have the most applicable 'upper nose' area?
    http://www.daz3d.com/viola-for-genesis-3-female-s
    http://www.daz3d.com/disa-for-genesis-3-female-s

    Viola's nose is definitely closer.

  • ChangelingChickChangelingChick Posts: 3,231

    That said, I think a lot of the curve is texture based, not morph based, so be careful...

  • XenomorphineXenomorphine Posts: 2,421

    The nose is straighter on the sides than I thought, when watching recent videos, but the curve's definitely there on the upper part and brow.

    Shall purchase and let you know if this has solved it!

  • nonesuch00nonesuch00 Posts: 18,217

    I thought Juliet Landau might have the most unusual nose I've ever seen in a couple of those pictures but then I realized it was makeup affecting the light bounce.

  • lexbairdlexbaird Posts: 167

    I put up this morph a couple of weeks ago on Sharecg. It's my humble try at a celeb portrait for Angie Harmon. Comments? Critiques?

    http://www.sharecg.com/v/84353/view/21/DAZ-Studio/Jane-Morph

     

    Jane1.jpg
    800 x 1000 - 370K
    Jane Grey Head Angle.jpg
    800 x 1000 - 301K
    Jane Grey Head Side.jpg
    800 x 1000 - 283K
  • IkyotoIkyoto Posts: 1,159
    lexbaird_28af262fc8 said:

    I put up this morph a couple of weeks ago on Sharecg. It's my humble try at a celeb portrait for Angie Harmon. Comments? Critiques?

    http://www.sharecg.com/v/84353/view/21/DAZ-Studio/Jane-Morph

     

    good stuff..and your bunny is way cool

  • nDelphinDelphi Posts: 1,862
    lexbaird_28af262fc8 said:

    I put up this morph a couple of weeks ago on Sharecg. It's my humble try at a celeb portrait for Angie Harmon. Comments? Critiques?

    http://www.sharecg.com/v/84353/view/21/DAZ-Studio/Jane-Morph

    We don't have to look twice to see the resemblance on this one. Great job. I will add her to my directory as soon as I get the chance.

  • ScavengerScavenger Posts: 2,674
    Scavenger said:

    I'd sware this looks like someone famous...but no one I've gone to can name it.

    I've continued this in the thread I had set up for it originally with ref pictures and everything...go vote :)

     

    http://www.daz3d.com/forums/discussion/comment/1135751/#Comment_1135751

  • ScavengerScavenger Posts: 2,674

    Found this while deep diving...

    https://www.renderosity.com/mod/bcs/index.php?ViewProduct=56382

     

    Id'd as Avril Lavigne in the editorial.

    Full56382.jpg
    798 x 798 - 207K
  • ScavengerScavenger Posts: 2,674

    And found this:

    http://ebrukash.deviantart.com/art/McCoy-Morph-For-M4-and-M4-Morp-177375244

     

    Which is Dr. McCoy and DeForest Kelly:)

    ---------------------

    And going back to an old one with some controversery over who it is...MRL Andromeda is pretty clearly the teenaged Jennifer Connelly

     

    MRL Andromeda v4 97844_001.jpg
    1631 x 880 - 818K
    MRL Andromeda v4 97844_005.jpg
    1990 x 1100 - 1M
  • ChangelingChickChangelingChick Posts: 3,231
    Scavenger said:

    And going back to an old one with some controversery over who it is...MRL Andromeda is pretty clearly the teenaged Jennifer Connelly

    Other than the parted lips and hair color, I don't see a resemblance. The lip shape is different, the nose is different, the eyes are angled differently and Andromeda's are wide while Jennifer's are more narrowly set, the jawline is different, the brows are very different.

  • ScavengerScavenger Posts: 2,674

    Stumbled on this..it looks like a useful site for Celebrity minded folks..

    http://healthyceleb.com/category/statistics/.

    (now to figure out how to use the measurments to adjust figures).

  • nDelphinDelphi Posts: 1,862
    Scavenger said:
    And going back to an old one with some controversery over who it is...MRL Andromeda is pretty clearly the teenaged Jennifer Connelly
     

    Yeah, I was argued with that it was Gwendoline Taylor. http://ilarge.lisimg.com/image/5154515/960full-gwendoline-taylor.jpg

    So I went with it. Now looking and your side by side comparison with young Jennifer Connelly and I see a lot more Jennifer Connelly in this morph.

  • lexbairdlexbaird Posts: 167
    Scavenger said:
    (now to figure out how to use the measurments to adjust figures).

    There is a measurement tool available here:

    http://www.daz3d.com/measure-metrics-for-daz-studio

    Plus there are several "measure wall" props around, to set figure heights. I picked up one at ShareCG.

    http://www.sharecg.com/v/69559/favorite/21/DAZ-Studio/Measuring-Wall

  • ScavengerScavenger Posts: 2,674

    Yeah, I know of Measure Metrics...have to read up on how it can be used to determine figure etc and adjust and so on..there's a thread somewhere here.

  • gederixgederix Posts: 390

    This one reminds me of Cintia Dicker: http://www.daz3d.com/cailin-for-victoria-7

     

  • alienareaalienarea Posts: 528

    The Gemma (G3F) face with Kelly skin accidentally looked like the late Michael Jackson in one of my renders.

  • IkyotoIkyoto Posts: 1,159
    lexbaird_28af262fc8 said:
    Scavenger said:
    (now to figure out how to use the measurments to adjust figures).

    There is a measurement tool available here:

    http://www.daz3d.com/measure-metrics-for-daz-studio

    Plus there are several "measure wall" props around, to set figure heights. I picked up one at ShareCG.

    http://www.sharecg.com/v/69559/favorite/21/DAZ-Studio/Measuring-Wall

    learn to use one and be consistant.I use MMand scale everything using that, so props, set dressing and figures are consist in scale.

     

  • ScavengerScavenger Posts: 2,674

    Renderosity has a new Dukes of Hazard themed release with Barbarah Bach/Daisy, john Snyder/Bo, and Tom Wopat/Luke characters.

This discussion has been closed.