Loading...
> >

Star Trek Builders Unite 3 “Runtime Amok”

1…2021232526…50

Comments

  • prydonian_96d3f0dd8aprydonian_96d3f0dd8a Posts: 79
    edited December 1969

    Mattymanx said:
    shadowhawk1 said:
    Mattymanx said:
    shadowhawk1 said:
    Thank you Matty! Now if I can get my hands on a 3 Super Star Destroyers and a 150 Star Destroyers I will completely take over the Star Trek Universe and realign it into the First Galactic EMPIRE!!!!!!!!


    You know... ;-)

    :lol: well if that is to much, how about a Death Star with added shielding on the exhaust port against snub fighters?

    As always you are awesome for doing the conversion.

    Pfft... what a ridiculous notion. Those are less then 2 meters across. There is no way anyone could hit those.

    I think there is only one Death Star out there. looked at it once, its not all that great. ISDs and SSDs however we have and can be done. They are rather easy really.

    Awesome conversion, Matty.

    I'd kill for a modified Corellian freighter, say a modified YT-1000 owned by a certain scruffy-looking nerfherder. And the other Corellian frieghters would do, too (YT2400 or YT13003) ;)

  • blutobluto Posts: 838
    edited December 1969

    this is the trek thread guys , im sure that you can get this settled on the star wars thread

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    bluto said:
    this is the trek thread guys , im sure that you can get this settled on the star wars thread

    (Tongue firmly in cheek as he types) Now, Bluto, let the children play while we adults watch the real sci-fi. :lol:

  • MattymanxMattymanx Posts: 6,902
    edited February 2013

    Lord Iffy said:
    Awesome conversion, Matty.

    I'd kill for a modified Corellian freighter, say a modified YT-1000 owned by a certain scruffy-looking nerfherder. And the other Corellian frieghters would do, too (YT2400 or YT13003) ;)


    Thanks!

    There are no decent Falcons anywhere.

    Post edited by Mattymanx on
  • prydonian_96d3f0dd8aprydonian_96d3f0dd8a Posts: 79
    edited February 2013

    mdbruffy said:
    bluto said:
    this is the trek thread guys , im sure that you can get this settled on the star wars thread

    (Tongue firmly in cheek as he types) Now, Bluto, let the children play while we adults watch the real sci-fi. :lol:

    (Tongue wedged in cheek) Oh boy, not this Trek is better than other Sci-Fi thing again... (joking)

    Besides, Doctor Who is the best. ;)

    Post edited by prydonian_96d3f0dd8a on
  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    there is this one at sharecg

    with working landing ramp and gear and turrets
    fairly decent texture

    http://www.sharecg.com/v/67123/browse/11/Poser/Star-Wars-Millenium-Falcon

  • blutobluto Posts: 838
    edited December 1969

    Lord Iffy said:
    mdbruffy said:
    bluto said:
    this is the trek thread guys , im sure that you can get this settled on the star wars thread

    (Tongue firmly in cheek as he types) Now, Bluto, let the children play while we adults watch the real sci-fi. :lol:

    (Tongue wedged in cheek) Oh boy, not this Trek is better than other Sci-Fi thing again... (joking)

    Besides, Doctor Who is the best. ;)


    James T.Kirk was many things , but he was never a timelord

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    bluto said:
    Lord Iffy said:
    mdbruffy said:
    bluto said:
    this is the trek thread guys , im sure that you can get this settled on the star wars thread

    (Tongue firmly in cheek as he types) Now, Bluto, let the children play while we adults watch the real sci-fi. :lol:

    (Tongue wedged in cheek) Oh boy, not this Trek is better than other Sci-Fi thing again... (joking)

    Besides, Doctor Who is the best. ;)


    James T.Kirk was many things , but he was never a timelord


    :lol:

  • prydonian_96d3f0dd8aprydonian_96d3f0dd8a Posts: 79
    edited December 1969

    MotoTsume said:
    there is this one at sharecg

    with working landing ramp and gear and turrets
    fairly decent texture

    http://www.sharecg.com/v/67123/browse/11/Poser/Star-Wars-Millenium-Falcon

    I found that member's conversions very hit and miss. Most seem to be converted from video games, and I had some serious headaches using that MF in Poser.

    Then again, not many places have any good quality Poser-friendly SW models... or Doctor Who ones, for that matter (apart from Daleks). No worries.

    Besides, Matty's Star Trek conversions are the tops. :)

  • PDSmithPDSmith Posts: 712
    edited February 2013

    Bluto,

    I've added your toy into the freebie list under something a bit more recognizable. Romulan Phaser.

    I'd post a render but both computers are rendering either the graphic novel in Luxrender or Andorian's in Lingerie aka Andorian's Secret Collection (What can I say I read a few to many Victoria's Secret cataloges while growing up.) :-)

    Mattymanx,

    Your conversion has been added to the list also. Thanks for the ship.

    -Paul

    Post edited by PDSmith on
  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    anyone able to model this item?

    profiles-engineering_tool.jpg
    1000 x 350 - 53K
  • patience55patience55 Posts: 7,006
    edited December 1969

    MotoTsume said:
    anyone able to model this item?

    Possibly. Any pics for a size reference?

  • patience55patience55 Posts: 7,006
    edited December 1969

    Demonslayer said:
    Catherine,

    I do have the figure setup tools for version 3 installed, so I'm gonna try it. I didn't want to upgrade to DS4 in the middle of my production of my 3d film because I could see lots of possible issues doing so. I need to get the suit to work in DS3.

    I'm going to try to make morph fit targets for all the normal figures if all goes well.

    The other thing, this will only be the custom original parts. I've got the M3 bodysuit in there to make sure stuff will fit and not have poke-through, but people will need that to make it work. Same with the gloves and boots as they're from the spacesuit for M3. But they are not touched as far as changing shape or size. They're defaults. The only thing I added to them were the bracers (for lack of a better description) but they sit on top.

    Ken :)

    Great. Then it's possible :-) And no I wouldn't suggest upgrading in the middle of production. However when you do decide to install it, you do not have to remove D/S3. 3 and 4 can co-exist. On my latest installs though something with the registry [I'm guessing] went a little wonky because D/S3 isn't remembering "where it was" when last closed and defaults over to a D/S4 section so it's just a matter of browsing it back to the correct folder for its content.

  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    Patience55 said:
    MotoTsume said:
    anyone able to model this item?

    Possibly. Any pics for a size reference?

    best one i could find:

    oh and this is the flux coupler that Garak killed Amaro with in the DS9 episode"Empok Nor".

    http://en.memory-alpha.org/wiki/Flux_coupler?file=Flux_coupler.jpg

  • Ryuu@AMcCFRyuu@AMcCF Posts: 668
    edited December 1969

    bluto said:
    Lord Iffy said:
    mdbruffy said:
    bluto said:
    this is the trek thread guys , im sure that you can get this settled on the star wars thread

    (Tongue firmly in cheek as he types) Now, Bluto, let the children play while we adults watch the real sci-fi. :lol:

    (Tongue wedged in cheek) Oh boy, not this Trek is better than other Sci-Fi thing again... (joking)

    Besides, Doctor Who is the best. ;)


    James T.Kirk was many things , but he was never a timelordTrue, but Jim Kirk is a phenomenal Luck Magnet ;)

  • DemonslayerDemonslayer Posts: 125
    edited December 1969

    Lord Iffy said:
    MotoTsume said:
    there is this one at sharecg

    with working landing ramp and gear and turrets
    fairly decent texture

    http://www.sharecg.com/v/67123/browse/11/Poser/Star-Wars-Millenium-Falcon

    I found that member's conversions very hit and miss. Most seem to be converted from video games, and I had some serious headaches using that MF in Poser.

    Then again, not many places have any good quality Poser-friendly SW models... or Doctor Who ones, for that matter (apart from Daleks). No worries.

    Besides, Matty's Star Trek conversions are the tops. :)

    Some very good 3d versions of the Millennium Falcon and an interior set, 3ds & max & LW formats here: http://www.scifi3d.com/list.asp?intGenreID=10&intCatID=10

  • patience55patience55 Posts: 7,006
    edited December 1969

    MotoTsume said:
    Patience55 said:
    MotoTsume said:
    anyone able to model this item?

    Possibly. Any pics for a size reference?

    best one i could find:

    oh and this is the flux coupler that Garak killed Amaro with in the DS9 episode"Empok Nor".

    http://en.memory-alpha.org/wiki/Flux_coupler?file=Flux_coupler.jpg

    Thanks. Right now I'm working on a head/hair item which will hopefully be finished this week. Then I'll see about this item. If somebody wants to model it as well, that's fine with me. I've also been watching the Tholian Web ... interesting spacesuit. Anyway, Vulcans can so lie. That's the episode in which Spock does.

  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    Patience55 said:
    MotoTsume said:
    Patience55 said:
    MotoTsume said:
    anyone able to model this item?

    Possibly. Any pics for a size reference?

    best one i could find:

    oh and this is the flux coupler that Garak killed Amaro with in the DS9 episode"Empok Nor".

    http://en.memory-alpha.org/wiki/Flux_coupler?file=Flux_coupler.jpg

    Thanks. Right now I'm working on a head/hair item which will hopefully be finished this week. Then I'll see about this item. If somebody wants to model it as well, that's fine with me. I've also been watching the Tholian Web ... interesting spacesuit. Anyway, Vulcans can so lie. That's the episode in which Spock does.

    Thanks :)

  • ThalekThalek Posts: 318
    edited December 1969

    Patience55 said:

    Thanks. Right now I'm working on a head/hair item which will hopefully be finished this week. Then I'll see about this item. If somebody wants to model it as well, that's fine with me. I've also been watching the Tholian Web ... interesting spacesuit. Anyway, Vulcans can so lie. That's the episode in which Spock does.

    Well, that, and the whopper he told when he told her that it was no rumor.

    Oh, and Menagerie.

    Or the time he was a dealer in kivas and trillium.

  • PDSmithPDSmith Posts: 712
    edited February 2013

    Figured I give you guys and gals a look at a rough draft image from one of the scenes from my upcoming Mirror Universe book. Rendered in Lux, but I had to remove the people or that would spoil the scene.

    frame_7-2.png
    800 x 515 - 909K
    Post edited by PDSmith on
  • ThalekThalek Posts: 318
    edited December 1969

    I need to learn more about using Lux, I can see. That's beautiful!

  • TheCastellanTheCastellan Posts: 709
    edited December 1969

    Part of my crossover stories.
    Here's some when Cassy and Vanda were stranded in the Star wars Universe/Galaxy. Here's Cassy shortly after she finished her Jedi training from Luke.


    Cassy, Vanda and their R-5 Astro, R5C5.

    SW_Crew.jpg
    1030 x 870 - 544K
    Cassy_Jedi.jpg
    1030 x 870 - 483K
  • mylochkamylochka Posts: 168
    edited December 1969

    DOWNLOAD HERE: http://www.sharecg.com/v/67610/view/11/Poser/Cardassian-Hair-for-V4

    3 Hair models to fit with Dairo Fish's Cardassian morph for V4 http://www.sharecg.com/v/67353/browse/11/Poser/Cardassian-Morph-for-V4

    CardassianFem01AD.jpg
    609 x 669 - 345K
  • ThalekThalek Posts: 318
    edited December 1969

    Nice work, both of you! I hope that M4 is not far behind . . .

  • mylochkamylochka Posts: 168
    edited December 1969

    DOWNOAD HERE: http://www.sharecg.com/v/67609/view/11/Poser/Vorta-Hair

    2 Hair models for V4 designed to fit with the Vorta morph from Bluto's morph pack: http://www.sharecg.com/v/67296/gallery/11/Poser/space-people-morphs

    VortaShortAD.jpg
    609 x 669 - 330K
  • blutobluto Posts: 838
    edited December 1969

    oh my mylochka has been a busy lil sweetheart, thank you luv !!

  • wolfgang_1wolfgang_1 Posts: 0
    edited December 1969

    mylochka said:
    DOWNLOAD HERE: http://www.sharecg.com/v/67610/view/11/Poser/Cardassian-Hair-for-V4

    3 Hair models to fit with Dairo Fish's Cardassian morph for V4 http://www.sharecg.com/v/67353/browse/11/Poser/Cardassian-Morph-for-V4


    Thank you very much .
  • TheCastellanTheCastellan Posts: 709
    edited December 1969

    MotoTsume said:
    there is this one at sharecg

    with working landing ramp and gear and turrets
    fairly decent texture

    http://www.sharecg.com/v/67123/browse/11/Poser/Star-Wars-Millenium-Falcon

    What's the proper scale size to put it for Victoria and Mike 4'?

  • MotoTsumeMotoTsume Posts: 520
    edited February 2013

    TheCastellan said:
    MotoTsume said:
    there is this one at sharecg

    with working landing ramp and gear and turrets
    fairly decent texture

    http://www.sharecg.com/v/67123/browse/11/Poser/Star-Wars-Millenium-Falcon

    What's the proper scale size to put it for Victoria and Mike 4'?

    No idea to be honest, only ever done one render of it -

    milfal1sml.jpg
    1500 x 864 - 177K
    Post edited by MotoTsume on
  • patience55patience55 Posts: 7,006
    edited December 1969

    MotoTsume said:
    Patience55 said:
    MotoTsume said:
    Patience55 said:
    MotoTsume said:
    anyone able to model this item?

    Possibly. Any pics for a size reference?

    best one i could find:

    oh and this is the flux coupler that Garak killed Amaro with in the DS9 episode"Empok Nor".

    http://en.memory-alpha.org/wiki/Flux_coupler?file=Flux_coupler.jpg

    Thanks. Right now I'm working on a head/hair item which will hopefully be finished this week. Then I'll see about this item. If somebody wants to model it as well, that's fine with me. I've also been watching the Tholian Web ... interesting spacesuit. Anyway, Vulcans can so lie. That's the episode in which Spock does.

    Thanks :)

    Got a start on it. The handle modeling is basically done.

    thehandle.jpg
    600 x 503 - 32K
This discussion has been closed.